I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a couple commands to work with.. mount, umount.. and a couple more.
I noticed that the machine that worked, my gateway, looked in /dev/scd1 or 0 don't remember.. the other machines don't even look in this file.
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
extlinux(1) General Commands Manual extlinux(1)NAME
extlinux - install the SYSLINUX bootloader on a ext2/ext3 filesystem
SYNOPSIS
extlinux [options] directory
DESCRIPTION
EXTLINUX is a new syslinux derivative, which boots from a Linux ext2/ext3 filesystem. It works the same way as SYSLINUX, with a few slight
modifications. It is intended to simplify first-time installation of Linux, and for creation of rescue and other special-purpose boot
disks.
The installer is designed to be run on a mounted directory. For example, if you have an ext2 or ext3 usb key mounted on /mnt, you can run
the following command:
extlinux --install /mnt
OPTIONS -H, --heads=#
Force the number of heads.
-i, --install
Install over the current bootsector.
-O, --clear-once
Clear the boot-once command.
-o, --once=command
Execute a command once upon boot.
-r, --raid
Fall back to the next device on boot failure.
--reset-adv
Reset auxiliary data.
-S, --sectors=#
Force the number of sectors per track.
-U, --update
Updates a previous EXTLINUX installation.
-z, --zip
Force zipdrive geometry (-H 64 -S 32).
BUGS
I would appreciate hearing of any problems you have with SYSLINUX. I would also like to hear from you if you have successfully used SYS-
LINUX, especially if you are using it for a distribution.
If you are reporting problems, please include all possible information about your system and your BIOS; the vast majority of all problems
reported turn out to be BIOS or hardware bugs, and I need as much information as possible in order to diagnose the problems.
There is a mailing list for discussion among SYSLINUX users and for announcements of new and test versions. To join, send a message to
majordomo@linux.kernel.org with the line:
SEE ALSO syslinux(1)SYSLINUX for ext2/ext3 filesystem 18 December 2007 extlinux(1)
