help mounting a phone!


 
Thread Tools Search this Thread
Operating Systems BSD help mounting a phone!
# 1  
Old 01-08-2008
help mounting a phone!

hi, im completely new to bsd, but everything seems to work that bit better than under linux distros! im using pc-bsd, and need to get access to my sony ericsson k550i. i have a 2gig m2 card in it, and when the phone is switched off, it acts like a usb storage device apparently! it shows up in dmesg, n thats it!

my normal usb pen auto mounts, but my phone does nothing! i would apprecite some help with this if anyone even knows where i should start? or even has anyone acheived this already?? thanks Smilie

this is my relevant dmesg

Quote:
cdce0: Sony Ericsson Sony Ericsson K550, rev 2.00/0.00, addr 2
cdce0: could not find data bulk in
device_attach: cdce0 attach returned 6
cdce0: at uhub1 port 2 (addr 2) disconnected
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 2
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
umass0: at uhub1 port 2 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub1 port 2 (addr 2) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 82MB (168000 512 byte sectors: 64H 32S/T 82C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: 1920MB (3934147 512 byte sectors: 255H 63S/T 244C)
umass0: at uhub0 port 2 (addr 3) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub0 port 2 (addr 3) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
cdce0: Sony Ericsson Sony Ericsson K550, rev 2.00/0.00, addr 3
cdce0: could not find data bulk in
device_attach: cdce0 attach returned 6
cdce0: at uhub0 port 2 (addr 3) disconnected
cdce0: Sony Ericsson Sony Ericsson K550, rev 2.00/0.00, addr 3
cdce0: could not find data bulk in
device_attach: cdce0 attach returned 6
cdce0: at uhub0 port 2 (addr 3) disconnected
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
umass0: at uhub0 port 2 (addr 3) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub0 port 2 (addr 3) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
# 2  
Old 01-09-2008
is that the same ? I see that the device is not being accepted for some reason, what happens if you turn the phone on ?
BTW, when I had PCBSD (v1.2) the command used to mount micro SD was : mount_msdosfs /dev/da0s1 /mnt/da0 - this were my disks at this time.
# 3  
Old 01-09-2008
thank you so much!!!!

not very graceful wot happened tho! i ran

mount_msdosfs /dev/da1s1 /mnt/phone

the terminal said the action wasnt permited, then suddenly the whole system recognised it! pc-bsd opened a popup asking wot i wanted to do, i clicked open, and behold, the job was done!!!!

thanks again!
Login or Register to Ask a Question

Previous Thread | Next Thread

5 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Connecting a phone

I have an LG VX9800 (The V), am using Linux Mint, and just downloaded BitPim. The problem: BitPim doesn't detect my phone. Then again, the computer doesn't even do that. I read here (under Reference > USB > Linux USB Setup) about direct USB access, but Linux Mint apparently doesn't use hotplug. Or... (0 Replies)
Discussion started by: Zucriy Amsuna
0 Replies

2. AIX

Phone support

We have a 7028 p series server that has a lapsed hardware service contract, and I was attempting to create a billable tech support phone call, and IBM said that they do on site billable only. Is anybody out there aware of reputable third party support companies I might be able to contact. I have... (7 Replies)
Discussion started by: markper
7 Replies

3. UNIX for Dummies Questions & Answers

Phone Dialer?

Is there a phone # dialer for Unix? I'm specifically looking for one in the OS X terminal, but I can run it through my FreeBSD computer too. --Andrew (0 Replies)
Discussion started by: andrewgray
0 Replies

4. UNIX for Advanced & Expert Users

Phone dialer?

Dos someone know of a simple phone dialer I can use to paste in a phone number, and dial it? It's a lazy habit I got into using Dos, and Windows. Sonshyne5 (10 Replies)
Discussion started by: Sonshyne5
10 Replies

5. Shell Programming and Scripting

Phone Directory

Hi Guys; im new here...my name is Mark and im a student from sinapore...i need help with a project im working on...can someone tell me how to create a phone directory with scripting which must include user-ID and password...im so worried right now cause i don't know where to start..i... (3 Replies)
Discussion started by: MaRk2002
3 Replies
Login or Register to Ask a Question