Until it died recently I had a Sun Blade 100, circa late 2001 era, 500mhz Sparc IIe with 2 GB of ram, (2) 15 GB HD's, and the stock peripherals, including monitor, which I still use on Intel equipment; It ran flawlessly with both FreeBSD for sparc64, and OpenBSD; I think OpenBSD is the best choice as X works right away from the install.
Good Afternoon,
I'm setting up a SunBlade 2500 using ufsrestoreand have gotten to the point where I have restored the root and usr partitions. However, the machine keeps rebooting, never really coming up. Looking at vfstab, it looks pretty empty- shouldn't I see entries like... (22 Replies)
Good Morning,
I took a mirror drive from one Solaris 9 machine and used it to set up another. After syncing another mirror on the second machine I restarted but I don't get a login screen.
I see a message:The X-server cannot be started on display :0
Also during startup I see:... (8 Replies)
Hi,
I recently got StoragaTek 2500 and I would like to connect it to my solaris machine, since I don't have much experience with storages, could someone point me how to do so, how can i present disks from storage on my solaris os? (everything is already connected)
thanks in advance (1 Reply)
Progress! 25% there on our way 10,000 FB fans on the new timeline:
https://www.unix.com/members/neo-albums-forum-pics-picture503-facebook-timeline-now-over-2-500-fans.png (0 Replies)
Hello All.
Really a newbie to Linux/Unix. Trying to get into Linux. Using XP PE currently. Installed cygwin and trying to intall cygwin-x. Everything else is setup nice but i can't seem to install these two packages (without whom xwin won't start)
1. xorg-x11-f100
2. xorg-x11-fnts
Tried the... (1 Reply)
Hi, Sir,
I have a customer who use a SB2000 as server and just upgraded three client machine with SB2500.
The system is used for planning and all boxes likely share the same source on server, so pretty slow when all machines are in operation.
The customer wish to do a server-to-client and... (0 Replies)
Hi guys,
I am a new member here. This is my first post.
I try to purchase some new Blade 2500 for the
company. However, the vendor suggests me to get Blade 2000 instead. The vendor said he has many problems
with new Silver Blade 2500's. Has anyone here had
simlar experience with blade 2500?... (4 Replies)
METASYS(8) NUT Manual METASYS(8)NAME
metasys - Driver for Meta System UPS equipment
NOTE
This man page only documents the hardware-specific features of the metasys driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
The metasys driver was written with the "Meta System UPS Protocol Rev.1.12" kindly supplied from Meta System.
The driver should support all the common features of the ups models:
o HF Line (/2) 1-8 boards
o HF Millennium (810, 820)
o HF TOP Line (910, 920, 930, 940, 950, 970, 980)
o ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)
o ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)
o ally HF (800, 1000, 1250, 1600, 2000, 2500)
o Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
CABLING
The needed cable is a standard pin-to-pin serial cable with at least pins 2, 3, and 5 (on DB9 connector) connected.
EXTRA ARGUMENTS
This driver supports no extra arguments from ups.conf(5).
BUGS
This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only.
Any information about the use of the driver with the other listed UPS are really welcome.
AUTHOR
Fabio Di Niro <blaxwan@users.sourceforge.net>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 METASYS(8)