Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Hello,
I have DS4000 IBM SAN Storage ( aka FastT Storage )
One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment )
My Question: How can I make the hotspare... (1 Reply)
Hello,
I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ?
My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
HI all,
I had recently change the Server storage from EMC to the IBM SAN.
but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server.
When i go to the server, and restarted it. i use the "format" command to check, but din see any... (1 Reply)
Hi All
Recently i plan use our company Sunfire V490 to hook up the IBM SAN Storage DS4000.
But i not sure is it got any requirement to do this, is it need any extra driver, equipment??? hope can get some advice from here..
Kindly advise.
Thanks all (3 Replies)
Hello,
I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700
After assigning some disks from SAN to AIX, I can see the disks in my AIX as
hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk
hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk
But it should... (0 Replies)
Hello,
Does anyone know how to copy SAN Storage logical disks from IBM TotalStorage Software.
I have a SAN Logical Disk of 200GB mounted on my AIX LPAR_1 via fibre channel fcs0
I would like to make an exact copy of the SAN Logical Disk from IBM totalStorage and mount it on AIX LPAR_2
... (4 Replies)
Hello everyone !
Im new on Ibm San DS4500.
Can you give me some tips to this, because I dont want to make a mistake.
I have some questions.
How can I know how much space get on the san, I cant find it.
How can add more space to a partition.
Do you have some tutorial about this. I... (0 Replies)
Hi All,
I would like to share this incident that happened the other day.
I have a question with this, https://www.unix.com/aix/64921-create-new-vg-san-rename-fs.html
And I thought it's related to the above link but the problem was the ibm san 4300 cache battery was dead and I need to click... (2 Replies)
PKI --SELF(1) strongSwan PKI --SELF(1)NAME
pki --self - Create a self-signed certificate
SYNOPSIS
pki --self [--in file|--keyid hex] [--type t] --dn distinguished-name [--san subjectAltName] [--lifetime days] [--serial hex] [--flag flag]
[--digest digest] [--ca] [--ocsp uri] [--pathlen len] [--nc-permitted name] [--nc-excluded name] [--policy-mapping mapping]
[--policy-explicit len] [--policy-inhibit len] [--policy-any len] [--cert-policy oid [--cps-uri uri] [--user-notice text]]
[--outform encoding] [--debug level]
pki --self --options file
pki --self -h | --help
DESCRIPTION
This sub-command of pki(1) is used to create a self-signed certificate.
OPTIONS -h, --help
Print usage information with a summary of the available options.
-v, --debug level
Set debug level, default: 1.
-+, --options file
Read command line options from file.
-i, --in file
Private key input file. If not given the key is read from STDIN.
-x, --keyid hex
Key ID of a private key on a smartcard.
-t, --type type
Type of the input key. Either rsa or ecdsa, defaults to rsa.
-d, --dn distinguished-name
Subject and issuer distinguished name (DN). Required.
-a, --san subjectAltName
subjectAltName extension to include in certificate. Can be used multiple times.
-l, --lifetime days
Days the certificate is valid, default: 1095.
-s, --serial hex
Serial number in hex. It is randomly allocated by default.
-e, --flag flag
Add extendedKeyUsage flag. One of serverAuth, clientAuth, crlSign, or ocspSigning. Can be used multiple times.
-g, --digest digest
Digest to use for signature creation. One of md5, sha1, sha224, sha256, sha384, or sha512. Defaults to sha1.
-f, --outform encoding
Encoding of the created certificate file. Either der (ASN.1 DER) or pem (Base64 PEM), defaults to der.
-b, --ca
Include CA basicConstraint extension in certificate.
-o, --ocsp uri
OCSP AuthorityInfoAccess URI to include in certificate. Can be used multiple times.
-p, --pathlen len
Set path length constraint.
-n, --nc-permitted name
Add permitted NameConstraint extension to certificate.
-N, --nc-excluded name
Add excluded NameConstraint extension to certificate.
-M, --policy-mapping issuer-oid:subject-oid
Add policyMapping from issuer to subject OID.
-E, --policy-explicit len
Add requireExplicitPolicy constraint.
-H, --policy-inhibit len
Add inhibitPolicyMapping constraint.
-A, --policy-any len
Add inhibitAnyPolicy constraint.
Certificate Policy
Multiple certificatePolicy extensions can be added. Each with the following information:
-P, --cert-policy oid
OID to include in certificatePolicy extension. Required.
-C, --cps-uri uri
Certification Practice statement URI for certificatePolicy.
-U, --user-notice text
User notice for certificatePolicy.
EXAMPLES
Generate a self-signed certificate using the given RSA key:
pki --self --in key.der --dn "C=CH, O=strongSwan, CN=moon"
--san moon.strongswan.org > cert.der
SEE ALSO pki(1)5.1.1 2013-07-31 PKI --SELF(1)
