10 More Discussions You Might Find Interesting
1. AIX
Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client... (0 Replies)
Discussion started by: omonoiatis9
0 Replies
2. AIX
Hi Guys,
I'm building a new NIM environment with clients on 3 different subnets. I want to get some advise on what is the best approach for this kind of setup.
This is the sample network for my new NIM.
Master IP: 10.20.1.20
Client IP subnet_1: 10.20.1.21
Client IP subnet_1: 10.30.1.21... (5 Replies)
Discussion started by: kaelu26
5 Replies
3. AIX
hi Admins,
How can I check the NIM master hostname/IP name from NIM client ? I don't see any option that I can try with nimclient command.
Let me know..
Thanks, (5 Replies)
Discussion started by: snchaudhari2
5 Replies
4. AIX
Iam attempting to add a client to NIM however the new client has a different subnet than master 10... & 193... , I've established from redbooks that it should be possible but can't find anything that states how?
Does anyone use nim in this way? (5 Replies)
Discussion started by: gefa
5 Replies
5. AIX
My NIM Master is running at aix 6100-07-02-1150. I would like to migrate to aix V7. The server is an lpar at a remote location. Is there a way to migrate it without going to the remote location and loading a cd into it? (3 Replies)
Discussion started by: gravy26
3 Replies
6. AIX
Guys, I need your help
I got a requirement from a cUstomer asking for a specific design
He wants to use the NIM Master as one single mgmt server and access the nodes maintained by it there by the accounting is in one single server for all the nodes
Note:- Direct login to the nodes will... (3 Replies)
Discussion started by: kkeng808
3 Replies
7. AIX
Hello everyone
Im trying to backup a nim client from nim master but I got this message
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
0042-001 nim:... (2 Replies)
Discussion started by: lo-lp-kl
2 Replies
8. AIX
Hello All,
I believe my NIM master is fine. lsnim and cat /etc/niminfo gives me the right output. While doing "lsnim" on a client machine, I get ksh:lsnim:"not found".
Please someone be nice enough to explain what are the steps to verify the master and client connectivity to do all the NIM... (3 Replies)
Discussion started by: solaix14
3 Replies
9. AIX
Hi,
I want to know what are steps required to create nim master in aix?
Regards,
Manoj (1 Reply)
Discussion started by: manoj.solaris
1 Replies
10. AIX
All,
I'm testing NIM on a 7026-m80 machine.
But everytime i want to setup the master, i get this error message...
Anyone who knows how to solve this issue? google doesn't seem to know much about it
# nim_master_setup
############################## NIM master setup... (1 Reply)
Discussion started by: kvanelshocht
1 Replies
LEARN ABOUT OSX
tk_maintaingeometry
Tk_MaintainGeometry(3) Tk Library Procedures Tk_MaintainGeometry(3)
__________________________________________________________________________________________________________________________________________________
NAME
Tk_MaintainGeometry, Tk_UnmaintainGeometry - maintain geometry of one window relative to another
SYNOPSIS
#include <tk.h>
Tk_MaintainGeometry(slave, master, x, y, width, height)
Tk_UnmaintainGeometry(slave, master)
ARGUMENTS
Tk_Window slave (in) Window whose geometry is to be controlled.
Tk_Window master (in) Window relative to which slave's geometry will be controlled.
int x (in) Desired x-coordinate of slave in master, measured in pixels from the inside of master's left border to the
outside of slave's left border.
int y (in) Desired y-coordinate of slave in master, measured in pixels from the inside of master's top border to the
outside of slave's top border.
int width (in) Desired width for slave, in pixels.
int height (in) Desired height for slave, in pixels.
_________________________________________________________________
DESCRIPTION
Tk_MaintainGeometry and Tk_UnmaintainGeometry make it easier for geometry managers to deal with slaves whose masters are not their parents.
Three problems arise if the master for a slave is not its parent:
[1] The x- and y-position of the slave must be translated from the coordinate system of the master to that of the parent before posi-
tioning the slave.
[2] If the master window, or any of its ancestors up to the slave's parent, is moved, then the slave must be repositioned within its
parent in order to maintain the correct position relative to the master.
[3] If the master or one of its ancestors is mapped or unmapped, then the slave must be mapped or unmapped to correspond.
None of these problems is an issue if the parent and master are the same. For example, if the master or one of its ancestors is unmapped,
the slave is automatically removed by the screen by X.
Tk_MaintainGeometry deals with these problems for slaves whose masters are not their parents, as well as handling the simpler case of
slaves whose masters are their parents. Tk_MaintainGeometry is typically called by a window manager once it has decided where a slave
should be positioned relative to its master. Tk_MaintainGeometry translates the coordinates to the coordinate system of slave's parent and
then moves and resizes the slave appropriately. Furthermore, it remembers the desired position and creates event handlers to monitor the
master and all of its ancestors up to (but not including) the slave's parent. If any of these windows is moved, mapped, or unmapped, the
slave will be adjusted so that it is mapped only when the master is mapped and its geometry relative to the master remains as specified by
x, y, width, and height.
When a window manager relinquishes control over a window, or if it decides that it does not want the window to appear on the screen under
any conditions, it calls Tk_UnmaintainGeometry. Tk_UnmaintainGeometry unmaps the window and cancels any previous calls to Tk_MaintainGeom-
etry for the master-slave pair, so that the slave's geometry and mapped state are no longer maintained automatically. Tk_UnmaintainGeome-
try need not be called by a geometry manager if the slave, the master, or any of the master's ancestors is destroyed: Tk will call it
automatically.
If Tk_MaintainGeometry is called repeatedly for the same master-slave pair, the information from the most recent call supersedes any older
information. If Tk_UnmaintainGeometry is called for a master-slave pair that is is not currently managed, the call has no effect.
KEYWORDS
geometry manager, map, master, parent, position, slave, unmap
Tk 4.0 Tk_MaintainGeometry(3)