AIX disk less with SAN


 
Thread Tools Search this Thread
Operating Systems AIX AIX disk less with SAN
# 1  
Old 03-28-2008
AIX disk less with SAN

Hi All,

I have mirrored SAN volume on my B80 rootvg. Can I just remove the mirror and "Remove a P V from a V G" and it will be a diskless AIX?

Is that going to boot on SAN rootvg volume?

Thanks in advance,
itik
# 2  
Old 03-30-2008
AIX disk less with SAN

Hi

Yes. You can use the bootlist command in order to make your SAN based disk be first in the boot list devices secuence and check if booting is ok. Do not break mirror before testing.

If you have problems booting you can still start your server in SMS mode and change the bootlist order again to that internal disk.
# 3  
Old 03-30-2008
I'm curious about the internal memory of AIX on how this is possible.

Does AIX (or other unix variant like HP-UX, SUN) have internal memory that store all these settings that it's possible to use external storage?

If this is stored on the BIOS like a PC then if the battery dies, it won't boot. Is that correct?

Please give me some shed info on this remarkable capability of AIX system. Before continuing with this path. Is this advisable so as to save a little bit of penny? I don't want to save a little bit of penny if there will be a big disadvantage.

Thanks
itik
# 4  
Old 03-31-2008
The boot list is stored in the firmware, the firmware is just like the bios on a PC.
The process is just the same, you must tell the firmware where to look for the boot device.
In AIX you can use the bootlist command to display or update the bootlist in the system firmware.

You are correct, if the battery dies there may be a problem booting.

Just like going in to the bios on a pc to correct a boot list after the battery died, on an AIX machine you can use SMS to correct the boot list.

Typically most people have the rootvg on local, internal, disks and any datavg's on SAN disks. This way if the SAN fails, the machine is still bootable, even if it cannot do any work because the SAN is offline.

You will probably also find the internal disks are slightly faster than SAN disks, this is useful for fast access to the operating system files and paging space.

Without a lot more information about your system and SAN configuration and testing of your specific setup there is no way to tell which would be best for you.

If you only have a small amount of space on the internal disks or one fiber card I'd leave things as they are, but check to see if the system can boot from the SAN disks, just so you know what you'll need to do to recover the system if the internal boot disk fails.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

SAN vs. Local disk.

I am in the market looking to purchase a new E950 server and I am trying to decide between using local SSD drives or SSD based SAN. The application that will be running on this server is read-intensive so I am looking for the most optimal configuration to support this application. There are no... (2 Replies)
Discussion started by: ikx
2 Replies

2. AIX

San disk appearing double in old AIX

Hi guys, :) I'm a studient in IT field (AIX) I'm trying to map a LUN from a SAN (DS3400) to an AIX server (5300-04-00) I know there is no MPIO on this version of AIX, and i see double my LUN from the SAN root@localhost # lscfg | grep hdisk + hdisk7 ... (13 Replies)
Discussion started by: Tharsan
13 Replies

3. AIX

SAN DISK raid level in AIX

Hello All, Our servers having emc clarion for the data disks. Is that possible to see those san disks raid level from AIX ? Am having AIX 6.1 and EMC clarion 5.5. Regards, Gowtham.G (3 Replies)
Discussion started by: gowthamakanthan
3 Replies

4. AIX

SAN Disk Appearing double in AIX

Hello Folks, I have directly connected my IBM Pseries AIX machine to SAN Storage I have a dual port Fibre Channel Adapter Connected both fiber ports to SAN Box IBM DS4500 Controller A & Controller B Using IBM DS storage manager client 10 -- created one logical disk and assigned to a... (18 Replies)
Discussion started by: filosophizer
18 Replies

5. Solaris

I/O Error on SAN Disk

Hi, I have a production solaris 10 SPARC system (portal). Yesterday legato/Networker gave an I/O Error on one of the files on its SAN mounted disk. I went to that particular file on the system, did an ls and it showed the file. However, ls -l did not work and it said IO error. ... (6 Replies)
Discussion started by: Mack1982
6 Replies

6. UNIX for Dummies Questions & Answers

SAN and Disk I/O ... do we care?

Hi all, My main function is as a DBA. Another person manages the server and the SAN. I just want to know if I should be worried about high disk I/O or is it irrelevant as the I/O "load balancing" will be "taken care" of by the SAN? For example, I have hdisk1-5 and I can see that there are... (2 Replies)
Discussion started by: newbie_01
2 Replies

7. Filesystems, Disks and Memory

SAN Disk w/o Cluster

Scenario: I've got 2 M5000's connected to a 9985 SAN storage array. I have configured the SAN disks with stmsboot, format and newfs. I can access the same SAN space from both systems. I have created files from both systems on the SAN space. Question: Why can't I see the file created... (3 Replies)
Discussion started by: bluescreen
3 Replies

8. Solaris

SAN disk failure

hi all, have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ?? thanks in advance. (3 Replies)
Discussion started by: cesarNZ
3 Replies

9. AIX

AIX 5.2/5.3 - rootvg on SAN disk - pros and cons

We are considering a DR strategy of booting AIX 5.3 and 5.3 logical partitions from EMC Symmetrix SAN disks, so that we can replicate via SRDF to a recovery site. Has anyone tried configuring AIX 5.x systems to boot from SAN disk? If so, can you provide any information on the pros and cons of... (6 Replies)
Discussion started by: jjgarrot
6 Replies

10. AIX

hard disk and san

Hello everyone I got several aix boxes with aix 5.3 I got a ibm san ds4500 My question is How can I do a match between my disks on aix and the san? I try to do a match with the LUN but for example. In my san I got several 1 LUN and on one of my aix box I got this If I type lscfg... (4 Replies)
Discussion started by: lo-lp-kl
4 Replies
Login or Register to Ask a Question