migrate from ssa to san

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Faster way: SAN hd to SAN hd copying

hi! i got a rhel 6.3 host that already have an xfs filesystem mounted from a SAN (let's call it SAN-1) whose size is 9TB. i will be receiving another SAN (let's call it SAN-2) storage of 15TB size. this new addition is physically on another SAN storage. SAN-1 is on a Pillar storage while the new...

2. AIX

Removing Faulty Disk SSA

Hi Experts, I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics. pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D SSA160 Physical Disk Drive ( MB) Is there a way to stop this...

3. AIX

Procedure for removing SSA array

Hi All, What's the proper procedure for removing SSA arrays? Is the procedure like these? - rmdev ssa disk - physical turn off the ssa - cfgmgr There's no more filesystem or logical volume on it. It's just pdisk and hdisk. Thanks in advance, itik

4. AIX

mirroring ssa to san

Hi guys, I'd like to share my migration/mirroring of ssa to san. No downtime for users, probably I/O performance. here's the step: 1 After the lun had been carved on the SAN and the connections had been done on AIX fiber card 2 “lspv” and look for the new SAN hdisk? on the bottom, say...

5. Linux

Howto clone/migrate a volume in the SAN

Dear Srs, I have a Linux server (linux01) booting from SAN with a volume in a Nexsan SATAbeast storage array (san01). The disk/volume has four ext3 partitions, total size is near to 400GB, but only 20-30GB are in use. I need to move this disk/volume to another Nexsan SATAbeast storage array...

6. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone, I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN? At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the...

7. AIX

Problem with a SSA drive

I've a problem with an IBM StorageWorks - Seagate SSA drive, model ST373453LC (IBM P/N 24P3733, Type S53D073, 72,8 GB 15K - USCSI 4 - 320 SSA). I bought this disk used but working; it came from an unknown IBM SSA storage array. I've removed the SCA - SSA adapter (IBM 18P3051 - 001 - R0) and i tried...

8. AIX

updating ssa

I am in the process of updating ssa adapters, drives and enclosures and wanted to know if there are any caveats that anyone would like to share. The documentation is not very clear on the ordering of the updates. Any tips would be appreciated.

9. AIX

ssa performances

Helo: We updated form AIX 4.3.3 to AIX 5.1-7 and after this we spent more than double time in read from external disks. Aparently the ssa cards microcode is at last level and all the ptf and apars are instaled. Out backups expent more than double time, but curiously in read only, if we write in...

10. AIX

RS6000 SSA Raid question

Hi Can I add disks on the fly to extend the capacity of an existing RAID 5 volume? It's created on a 4P Advanced SSA Raid Adapter. I need to extend a volume group, so I figured it would be easiest to extend the "physical disk" which is a RAID5 volume. Thanks.

LEARN ABOUT OSF1

numa_scheduling_groups

numa_scheduling_groups(4)				     Kernel Interfaces Manual					 numa_scheduling_groups(4)

NAME

       numa_scheduling_groups - Compaq Tru64 UNIX NUMA Scheduling Groups description (libnuma library)

DESCRIPTION

       Normally,  the  kernel  scheduler  attempts to distribute the workload evenly over the entire machine. When the system resources are evenly
       utilized, the machine is considered to be balanced. When balancing the workload, the scheduler operates in a context-free manner; that  is,
       processes  may be distributed to various CPUs, or other resources, without regard to their function or relationship to one another. In cer-
       tain cases, a user may wish to bundle a group of processes together so that they have equal  access  to	the  same  system  resources.  For
       instance,  cooperating  processes that share the same physical memory may perform better if all of these processes execute on CPUs that are
       local to that memory.

       NUMA Scheduling Groups (NSG) cause the scheduler load-balancing system to treat all members of an NSG as a unit. If one	process  belonging
       to an NSG moves from one Resource Affinity Domain (RAD) to another, all other members of the NSG have to move with it.

       NSGs  and  their  members  have the following characteristics: The resource domain of the first process joining an NSG provides the initial
       resource domain location for that NSG, called the NSG home RAD.	All other processes joining the NSG (through  the  nsg_attach_pid()  func-
       tion) will be migrated to the NSG home RAD.  If the joining process is not allowed to migrate, the nsg_attach_pid() function will fail.	To
       support load balancing, an NSG is allowed to migrate to any RAD on the system if none of its members is bound to a specific resource  (such
       as another RAD, CPU, and so on).  An NSG member is allowed to attach to or bind to a resource only if no other members are bound to differ-
       ent resources. The entire NSG will migrate to the RAD containing the resource at the time it was successfully bound.  If one NSG member	is
       bound  to  a resource, all other members of that NSG are also bound to the RAD containing that resource, because the NSG and, therefore its
       members, is no longer allowed to migrate.

SEE ALSO

       Commands: runon(1)

       Functions: bind_to_cpu(3), nsg_attach_pid(3), nsg_detach_pid(3),  nsg_destroy(3),  nsg_get(3),  nsg_get_pids(3),  nsg_init(3),  nsg_set(3),
       numa_intro(3), rad_attach_pid(3), rad_bind_pid(3), rad_detach_pid(3)

															 numa_scheduling_groups(4)

AIX