|
|
Boot problem - 0c33
|
|
isl(1M) isl(1M) NAME
isl - initial system loader DESCRIPTION
implements the operating system independent portion of the bootstrap process. It is loaded and executed after self-test and initialization have completed successfully. The processor contains special purpose memory for maintaining critical configuration related parameters (e.g. Primary Boot, Alternate Boot, and Console Paths). Two forms of memory are supported: Stable Storage and Non-Volatile Memory (NVM). Typically, when control is transferred to an sequence takes place. An sequence allows a complete bootstrap operation to occur with no intervention from an operator. executes commands from the file in a script-like fashion. is enabled by a flag in Stable Storage. is a mechanism that automatically locates the boot and console devices. For further information, see pdc(1M). During an sequence, displays its revision and the name of any utility it executes. However, if is disabled, after displays its revision, it then prompts for input from the console device. Acceptable input is any command name or the name of any utility available on the sys- tem. If a non-fatal error occurs or the executed utility returns, again prompts for input. Commands There are several commands available in although not all commads are supported on cellular systems . The following is a list with a short description. Parameters may be entered on the command line following the command name. They must be separated by spaces. prompts for any necessary parameters that are not entered on the command line. Help - List commands and available utilities List available utilities Enable or disable the autoboot sequence Parameter - or Enable or disable the sequence Parameter - or Modify the Primary Boot Path Parameter - Primary Boot Path in decimal Modify the Alternate Boot Path Parameter - Alternate Boot Path in decimal Modify the Console Path Parameter - Console Path in decimal List contents of the file Display the Primary Boot, Alternate Boot, and Console Paths Display the contents of one word of NVM in hexadecimal Parameter - NVM address in decimal or standard hexadecimal notation Display the contents of one word of Stable Storage in hexadecimal Parameter - Stable Storage address in decimal or standard hexadecimal notation DIAGNOSTICS
displays diagnostic information through error messages written on the console and display codes on the LED display. For the display codes, are informative only. and indicate errors, some of which are fatal and cause the system to halt. Other errors merely cause to display a message. Non-fatal errors during an sequence cause the sequence to be aborted and to prompt for input. After non-fatal errors during an interactive session, merely prompts for input. Fatal errors cause the system to halt. The problem must be corrected and the system RESET to recover. is executing. is from the file. Cannot find an file. aborted. No console found, can only Directory of utilities is too big, reads only 2K bytes. file is inconsistent. aborted. Utility file header inconsistent: SOM values invalid. file input string exceeds 2048 characters. aborted. command or utility name exceeds 10 characters. has transferred control to the utility. Internal inconsistency: Volume label - Internal inconsistency: Directory - Error reading file. Error reading from console - Error writing to console - Not an command or utility. Utility file header inconsistent: Invalid System ID. Error reading utility file header. Utility file header inconsistent: Bad magic number. Utility would overlay in memory. Utility requires more memory than is configured. Error reading utility into memory. Incorrect checksum: Reading utility into memory. Console needed - Internal inconsistency: Boot device class - Destination memory address of utility is invalid. Utility file header inconsistent: pdc_cache entry. Internal inconsistency: iodc_entry_init - Internal inconsistency: iodc_entry_init - console - Internal inconsistency: iodc_entry_init - boot device - Utility file header inconsistent: Bad aux_id. Bad utility file type. SEE ALSO
boot(1M), pdc(1M). PA-RISC Systems Only isl(1M)
