reading contents on a 4mm tape

9 More Discussions You Might Find Interesting

1. AIX

Restore directory and contents from tape

Hi, I have taken a backup of a directory on my tape in using below command cd /backup find * -print|backup -ivf '/dev/rmt0' '-U' |tee -a /syslogs/backup.log and output appear in below format. a 0 rman-before-08032014 a 58403323904...

2. AIX

Slow listing of LTo5 tape contents

Hi, We are taking our filesystem backup having size of 1.3 TB on LTO5 catridges using the following command find * -print|backup -ivf '/dev/rmt0' '-U' i.e backup byname and it took about 6.5 Hours to complete When we are listing same tape contents using the following command restore...

3. Solaris

viewing the the contents of Tape on Solaris 10

Hi all, i would like to view the contents of Tape on Solaris 10 i issued the following command tar -tvf /dev/rmt/0m i'm getting the following error bash-3.00# tar -tvf /dev/rmt/1m tar: tape read error by the way the reference to the command is on sun's wiki any alternatives Thanks in...

4. UNIX for Dummies Questions & Answers

Reading label from tape

Hi, I have a HP SURESTORE 40 tape drive. Several archives are stored on it using DUMP. I have several volumes stored on the tape... If I issue restore -rf /dev/st0 will it restore just the arhcive that the tape reader is currently on or will it restore all of them? Thanks,

5. UNIX for Advanced & Expert Users

Reading from a corrupted tape

I've got a backuptape in cpio format that was accidentally overwritten with a very small batch file. As I assume that the cpio header has been overwritten, I cannot extract files from the backup in the conventional manner: ( cpio -itv </dev/rct0 cpio: this is not a cpio file, bad header) ...

6. AIX

Problem reading a 4mm tape drive

I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command... tar tvf /dev/rmt0 ...and I keep getting the following error message: tar: 0511-193 An error occurred while reading from the media. There is not enough memory available now. I've googled this error...

7. AIX

4MM Tape Drive

Hello all, I have just installed an HP dat72 external tape drive to an IBM 275 Intellistation (AIX 5L). It was installed as an Other SCSI Tape Drive (rmt1). I am using the Web Based System Manager at this point to do an initial backup of a journaled file system. I am getting an error and am...

8. UNIX for Dummies Questions & Answers

reading from tape error

I have been attempting to read a DLT tape, but encountered problems. I have applied patches from SUN that 'resolve' known problems with tape reading etc...but still the error! Techsupport reckon that the data/tape is corrupt. I would like to think they aren't. Are there any issues with...

9. UNIX for Dummies Questions & Answers

error reading from tape

Hi all, I am attempting to read tar images from a DLT tape, and have recieved an error, which i don't know: tar: blocksize = 8 tar: directory checksum error I have been able to read from other tapes, using the same command (tar -tvf /devicename) but this time i have an...

LEARN ABOUT ULTRIX

mt

mt(1)							      General Commands Manual							     mt(1)

Name
       mt - magnetic tape manipulating program

Syntax
       mt [-f tapename] command [count]

Description
       The command permits the operation of a magnetic tape drive.

Options
       The  -f	flag  option  uses  the specified tape device (next argument) in place of either that tape device defined by your TAPE environment
       variable (.login or .profile) or /dev/nrmt0h.

       Some operations may be performed multiple times by specifying count.  By default, performs the requested operation once.

       The command argument defines the operation to be performed.  Only as many characters as are required to uniquely identify a command need be
       specified.

       The following is a list of commands:

       bsf		   Backspace count files.

       bsr		   Backspace count records.

       cache		   Allows to use the cache buffer on a tape drive that has the cache buffer feature.

       clhrdsf		   Clear  hardware/software problem.  Works with tape drives which use the TMSCP tape controller interface This command is
			   restricted to root access only.

       clserex		   Clear serious exception.  Works with tape drives which use the TMSCP tape controller interface

       clsub		   Clear subsystem.  Works with tape drives which use the TMSCP tape controller interface This command	is  restricted	to
			   root access only.

       eof, weof	   Write count end-of-file marks at the current position on the tape.

       eotdis		   Disable  end-of-tape  detection.   When the end of tape is reached, the tape will run off the reel.	Only the superuser
			   can issue this command.  The command remains in effect for the device until end-of-tape detection is enabled  with  the
			   eoten command.

       eoten		   Enable  end-of-tape	detection.   When the end-of-tape markers are reached, the tape is halted on the reel, between the
			   two end-of-tape markers.  Only the superuser can issue this command.  The command remains  in  effect  for  the  device
			   until end-of-tape detection is disabled with the eotdis command.  This is the default mode after a system boot.

       fsf		   Forward-space count files.

       fsr		   Forward-space count records.

       nocache		   Disables the use of the cache buffer for any tape drive that has the cache buffer feature.

       offline, rewoffl    Rewind the tape and place the tape unit off-line.

       retension	   Retensions the tape.  Retension means moving the tape one complete pass between EOT and BOT.

       rewind		   Rewind the tape.

       status		   Print status information about the tape unit.

Examples
       This example shows how to rewind the tape
       mt -f /dev/rmt0l rewind
       This example shows how to backspace the tape nmt1h three files:
       mt -f /dev/nrmt1h bsf 3
       This example shows how to write two end-of-file marks at the current position on tape nmt6h:
       mt -f /dev/nrmt6h eof 2

Return Values
       In  shell  scripts, returns a 0 exit status when the operation(s) were successful, 1 if the command was unrecognized, and 2 if an operation
       failed.

Files
       /dev/rmt?h or /dev/rmt?l
		 Raw magnetic tape interface with rewind when closed

       /dev/nmt?h or /dev/nmt?l
		 Raw magnetic tape interface with no rewind when closed

See Also
       dd(1), tar(1), ioctl(2), mtio(4), tms(4), environ(7)

																	     mt(1)

AIX