RAID10 array(2 disks)(not AIX lvm) was configured and working, then one disk failed and IBM support replaced that. Now raid array is degraded, data is not lost. I see new disk model(same as original) serial and etc.
What I did trying to reconstruct:
Booted diagnostics, launched RAID Array Manager, lets list array status:
Code:
->List SAS Disk Array Configuration
------------------------------------------------------------------------
Name Resource State Description Size
------------------------------------------------------------------------
sissas0 FFFFFFFF Available PCI Express x8 Planar 3Gb SAS Adapter
hdisk0 00FF0000 Degraded RAID 10 Array 283.8GB Rebuild Failed 04
pdisk1 00030000 Active Array Member 283.8GB
pdisk0 00020000 Failed Array Member 300.0GB
so array is degraded, pdisk0 is new replaced disk(same model as original) - it's size looks bigger but disks not formatted as raid block size look bigger?, I tried to format it using "Create an Array Candidate pdisk and Format to RAID block size" but no items available for operation since pdisk0 is already pdisk not hdisk.
So lets try to reconstruct:
Code:
->Reconstruct a SAS Disk Array->select "pdisk0 00020000 Failed Array Member 300.0GB"
Post processing pdisk0........Rebuild 0% |
┌──────────────────────────────────────────────────────────────────────────┐
│ ERROR MESSAGE │
│ │
│ Press Enter or Cancel to return to the │
│ application. │
│ │
│ 1800-034 Exit status (255) returned by command. │
│ (Command process used the stdout and stderr │
│ file descriptors inherited from the SMIT process.) │
│ │
│ F1=Help F2=Refresh F3=Cancel │
│ Esc+8=Image Esc+0=Exit Enter=Do │
└──────────────────────────────────────────────────────────────────────────┘
Hello,
I have a complicated situational find and replace that I wrote in bash because I didn't know how to do everything in awk. The code works but is very slow, as expected.
To create my modified file, I am looping through an array that was populated earlier and making some replacements at... (6 Replies)
I have created a RAID10 array (near layout) with four 8 GiB virtual hard drives, making a 16 GiB array (/dev/md0 formatted as ext4). On the other hand, I have a 16 GiB RAID1 array (/dev/md1, also formatted as ext4).
The purpose of these setups is to compare the read and write performances of each... (13 Replies)
Greetings!
Here's one which has been bugging me for a bit ;)
As might be known, LibreOffice is available to some of us Linux folk as a large set of debs. Of course, being a curious sort, I'd like to dig in and recreate the original tree which is composed of these assorted archives.
So, I... (1 Reply)
Trying to do some control flow parsing based on the index postion of an array member. Here is the pseudo code I am trying to write in (preferably in pure bash) where possible. I am thinking regex with do the trick, but need a little help.
pesudo code
if == ENDSINFIVEINTS ]]; then
do... (4 Replies)
Hi Everyone,
I need some help to construct a long 'Sbjct' string from the following input using incremental order of 'Sbjct' starting number (e.g. 26325115,33716368,33769033,34869860 etc.)
Different 'Sbject' string will be separated by 'NNNN's as:
... (6 Replies)
So I have a file in the following format
>*42
abssdfalsdfkjfuf
asdhfskdkdklllllllffl
eiffejcif
>2
dfhucujf
dhfjdkfhskskkkkk
eifjvujf
ddftttyy
yyy
>~
ojcufk
kcdheycjc
djcyfjf
and I would like it to output
abssdfalsdfkjfufasdhfskdkdklllllllffleiffejcif (3 Replies)
I have an array and two variables as below,
I need to check if $datevar is present in $filename.
If so, i need to replace $filename with the values in the array.
I need the output inside an ARRAY
How can this be done.
Any help will be appreciated. Thanks in advance. (2 Replies)
I am facing a strange error while creating posix threads:
Given below are two snippets of code, the first one works whereas the second one gives a garbage value in the output.
Snippet 1
This works:
--------------
int *threadids;
threadids = (int *) malloc (num_threads * sizeof(int));
... (4 Replies)
Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg:
ð
Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #56338483.
Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833.
... (1 Reply)