Power5 9111-520 reload of AIX 6.1 - help needed


 
Thread Tools Search this Thread
Operating Systems AIX Power5 9111-520 reload of AIX 6.1 - help needed
# 1  
Old 04-25-2016
Power5 9111-520 reload of AIX 6.1 - help needed

Hello all, I am hoping someone can point me in the right direction here.

We had a machine running AIX 6.1 that someone completely corrupted, so we decided to re-load it from media. I was able to boot into DVD media, select options for complete (destructive) install, AIX standard, etc. The installation seemed to go well. Toward the end I saw a failure screen flash by which seemed to indicate trouble loading file sets for various PCI and USB devices, however the installation seemed to complete and reboot the system.

When the system boots, the graphical console (vga and usb keyboard) only displays the textual AIX welcome screen and then appears to go unresponsive. I was expecting at some point to see the initial AIX setup. Service console and serial ports don't seem to respond to anything either.

There is some evidence that this machine was once configured to be managed by an HMC server ... but that server has gone defunct and not available at this time.

Any advice? I am open to just about anything ...

Thanks

Last edited by RudiC; 04-26-2016 at 02:49 AM.. Reason: Corrected title that had the post's first sentence in it.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. AIX

AIX 6.1, POWER5 and Spectre/Meltdown

Apologies for this newbie question. We have inherited an IBM p5 520 (9111-520) running AIX 6.1.0.0 which seems to be the base install and no further patches installed. Is this vulnerable to the Spectre/Meltdown threat? Are patches available? Looks like AIX 6.1.0.0 went 'end of support' in... (8 Replies)
Discussion started by: the_garbage
8 Replies

2. AIX

IBM QSECOFR password missing P/N 9405-520

How to remove or reset password QSECOFR from IBM iSeries AS/400 P/N 9405-520. Regards (2 Replies)
Discussion started by: mtbax7
2 Replies

3. AIX

IBM's pSeries 570 vs a 520 vs 550

Hidey Ho Folks, Looking to buy a pServer for playing around with the IBM side of things. Looked around for a bit and notice that there is a significant price gap for the used 570's (Single Units) vs the 520's and 550's that folks are selling. Curious what to watch out for in either case? And... (6 Replies)
Discussion started by: Devyn
6 Replies

4. AIX

Upgrading Power5 from 5.3 to...

I have a power5 that I would like to update and bring everything forward. I am wondering about trouble-free upgrades. Is it better to go 5.3 -> 7 or 5.3 ->6 ->7? The power5 box is behind and hopefully can learn from experiences here. Thanks. (6 Replies)
Discussion started by: redi
6 Replies

5. Hardware

VT 520 Terminal

Back of a VT 520 Teminal has a 1"X1" (approx.) rectangular area covered by a removable plastic flap. It is just above the keyboard hole(mini 6 pin DIN). What is it? Thank you. ---------- Post updated at 02:49 PM ---------- Previous update was at 11:37 AM ---------- I've got the answer.... (0 Replies)
Discussion started by: vectrum
0 Replies

6. AIX

IBM pSeries Power5 9111-285 1,9 GHz

Hi , I am planing to buy IBM pSeries Power5 9111-285 1,9 GHz but I am confused with few things. I would be happy if you could clear it up for me ? 1.Do I have to buy some license in order to create Lpars ? 2.Do I have to buy some license in order to use HMC , micro - partiocioning , VIOS... (4 Replies)
Discussion started by: phobus
4 Replies

7. AIX

Help needed with AIX 6.1

Hi, We have just purchased an ibm Power 520 express box with AIX 6.1 preloaded onto it. Using a null modem cable we have connected this upto a Windows 2003 server. From this Windows 2003 server we can using hyperterminal connect to it. I can aslo connect to the Advanced System Management... (16 Replies)
Discussion started by: yfayyaz
16 Replies

8. AIX

AIX Install on 9111-520

I have a 9111-520 (p5 520) that I inherited, on which I want to install AIX 5.3 or possibly 6.1. I've installed AIX many times, on a variety of platforms, but this one isn't working for me. What I can't seem to figure out is how to set it up to boot the CD. I'm assuming there is something I... (2 Replies)
Discussion started by: thomn8r
2 Replies

9. AIX

Problem with knlist in AIX 5.3 for Power5 processor

Hi all, I have a AIX 5.3 Installation on the Power5 processor. I am using the knlist API for getting the details of the CPU details like user cpu, kernel cpu, idle cpu and wait cpu. My code is working fine on other Installations of AIX like PowerPC_POWER4 but it is giving wrong values on Power5... (0 Replies)
Discussion started by: rajesht
0 Replies
Login or Register to Ask a Question
PERLOS400(1)						 Perl Programmers Reference Guide					      PERLOS400(1)

NAME
perlos400 - Perl version 5 on OS/400 DESCRIPTION
This document describes various features of IBM's OS/400 operating system that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs. By far the easiest way to build Perl for OS/400 is to use the PASE (Portable Application Solutions Environment), for more information see <http://www.iseries.ibm.com/developer/factory/pase/index.html> This environment allows one to use AIX APIs while programming, and it provides a runtime that allows AIX binaries to execute directly on the PowerPC iSeries. Compiling Perl for OS/400 PASE The recommended way to build Perl for the OS/400 PASE is to build the Perl 5 source code (release 5.8.1 or later) under AIX. The trick is to give a special parameter to the Configure shell script when running it on AIX: sh Configure -DPASE ... The default installation directory of Perl under PASE is /QOpenSys/perl. This can be modified if needed with Configure parameter -Dprefix=/some/dir. Starting from OS/400 V5R2 the IBM Visual Age compiler is supported on OS/400 PASE, so it is possible to build Perl natively on OS/400. The easier way, however, is to compile in AIX, as just described. If you don't want to install the compiled Perl in AIX into /QOpenSys (for packaging it before copying it to PASE), you can use a Configure parameter: -Dinstallprefix=/tmp/QOpenSys/perl. This will cause the "make install" to install everything into that directory, while the installed files still think they are (will be) in /QOpenSys/perl. If building natively on PASE, please do the build under the /QOpenSys directory, since Perl is happier when built on a case sensitive filesystem. Installing Perl in OS/400 PASE If you are compiling on AIX, simply do a "make install" on the AIX box. Once the install finishes, tar up the /QOpenSys/perl directory. Transfer the tarball to the OS/400 using FTP with the following commands: > binary > site namefmt 1 > put perl.tar /QOpenSys Once you have it on, simply bring up a PASE shell and extract the tarball. If you are compiling in PASE, then "make install" is the only thing you will need to do. The default path for perl binary is /QOpenSys/perl/bin/perl. You'll want to symlink /QOpenSys/usr/bin/perl to this file so you don't have to modify your path. Using Perl in OS/400 PASE Perl in PASE may be used in the same manner as you would use Perl on AIX. Scripts starting with #!/usr/bin/perl should work if you have /QOpenSys/usr/bin/perl symlinked to your perl binary. This will not work if you've done a setuid/setgid or have environment variable PASE_EXEC_QOPENSYS="N". If you have V5R1, you'll need to get the latest PTFs to have this feature. Scripts starting with #!/QOpenSys/perl/bin/perl should always work. Known Problems When compiling in PASE, there is no "oslevel" command. Therefore, you may want to create a script called "oslevel" that echoes the level of AIX that your version of PASE runtime supports. If you're unsure, consult your documentation or use "4.3.3.0". If you have test cases that fail, check for the existence of spool files. The test case may be trying to use a syscall that is not implemented in PASE. To avoid the SIGILL, try setting the PASE_SYSCALL_NOSIGILL environment variable or have a handler for the SIGILL. If you can compile programs for PASE, run the config script and edit config.sh when it gives you the option. If you want to remove fchdir(), which isn't implement in V5R1, simply change the line that says: d_fchdir='define' to d_fchdir='undef' and then compile Perl. The places where fchdir() is used have alternatives for systems that do not have fchdir() available. Perl on ILE There exists a port of Perl to the ILE environment. This port, however, is based quite an old release of Perl, Perl 5.00502 (August 1998). (As of July 2002 the latest release of Perl is 5.8.0, and even 5.6.1 has been out since April 2001.) If you need to run Perl on ILE, though, you may need this older port: <http://www.cpan.org/ports/#os400> Note that any Perl release later than 5.00502 has not been ported to ILE. If you need to use Perl in the ILE environment, you may want to consider using Qp2RunPase() to call the PASE version of Perl. AUTHORS
Jarkko Hietaniemi <jhi@iki.fi> Bryan Logan <bryanlog@us.ibm.com> David Larson <larson1@us.ibm.com> perl v5.18.2 2013-11-04 PERLOS400(1)