10 More Discussions You Might Find Interesting
1. AIX
wasn't quite sure which forum to post in.
What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device? (5 Replies)
Discussion started by: mrmurdock
5 Replies
2. AIX
Hi There,
First of all I'm new to *nix world, so bear with me and English is not my native tongue :)
Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation)
I've got HMC installed and realized that network options in GUI... (8 Replies)
Discussion started by: JKat
8 Replies
3. AIX
Hello,
We have an Power8 System (S822) and a IBM StorWize v3700 SAN.
The OS is AIX 7.1.
With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte).
I carved my volumes in the StorWize and presented to... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
4. AIX
Hello,
Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine.
Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX.
Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
5. AIX
Read "Migration to POWER8" article to get prepared for migration to POWER8:
link removed, advertisement (0 Replies)
Discussion started by: pave01
0 Replies
6. AIX
Hello All,
Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall: (1 Reply)
Discussion started by: kalaso
1 Replies
7. AIX
I started the AIX install with a fiber channel disk, and let it run:
restricted by GSA ADP Schedule Contract with IBM Corp.
. . . . . << End of copyright notice for perfagent.tools >>. . . .
... (2 Replies)
Discussion started by: Gideon1a
2 Replies
8. AIX
Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR.
How can I do it without rebooting the LPARS.
POWER6 with HMC
LPARS = AIX 6.1
Any info
developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ...
But... (5 Replies)
Discussion started by: filosophizer
5 Replies
9. AIX
Hello everybody, had a question.
Iam having a p650 box here, System Model: IBM,7038-6M2
Machine Serial Number: 1078DCC
managed system - 1 which has 2 lpars on it
i added memory to the box(made sure that memory added was in proper quads and was verified by a CE)
after i rebooted the box, the... (4 Replies)
Discussion started by: karthikosu
4 Replies
10. AIX
Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed.
Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another..
cheers
Bala (4 Replies)
Discussion started by: balaji_prk
4 Replies
XE(4) BSD Kernel Interfaces Manual XE(4)
NAME
xe -- Xircom PCMCIA Ethernet device driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device xe
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_xe_load="YES"
DESCRIPTION
The xe driver supports PCMCIA Ethernet adapters based on Xircom CE2- and CE3-class hardware. This includes devices made by Xircom along with
various OEM manufacturers.
Please note that the xe driver only supports PCMCIA cards and their Ethernet functions. xe does not support the on-board modem device
located on some version of the Ethernet/modem combo cards. In particular, Xircom RealPort2 cards are not supported by this driver.
The xe driver supports the following media types:
autoselect Enable autoselection of media type and options.
10Base2/BNC
Select 10Mbps operation on a BNC coaxial connector.
10BaseT/UTP
Select 10Mbps operation on a RJ-45 connector.
100BaseTX Select 100Mbps operation.
Note that 100BaseTX operation is not available on CE2-class cards, while the 10Base2/BNC mode is only available on CE2-class cards. Full-
duplex operation is currently not supported. For more information on configuring network interface devices, see ifconfig(8).
HARDWARE
The xe driver supports the following cards:
o Xircom CreditCard Ethernet (PS-CE2-10)
o Xircom CreditCard Ethernet + Modem 28 (PS-CEM-28)
o Xircom CreditCard Ethernet + Modem 33 (CEM33)
o Xircom CreditCard 10/100 (CE3, CE3B)
o Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56)
o Xircom RealPort Ethernet 10 (RE10)
o Xircom RealPort Ethernet 10/100 (RE100)
o Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)
o Accton Fast EtherCard-16 (EN2226)
o Compaq Microcom CPQ550 Ethernet/Modem PC Card
o Compaq Netelligent 10/100 PC Card (CPQ-10/100)
o Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)
o Intel EtherExpress Pro/100 LAN/Modem PC Card Adapter (Pro/100 M16B)
Other similar devices using the same hardware may also be supported.
DIAGNOSTICS
xe%d: Cannot allocate ioport
xe%d: Cannot allocate irq A fatal initialization error occurred while attempting to allocate system resources for the card.
xe%d: Unable to fix your %s combo card A fatal initialization error occurred while attempting to attach an Ethernet/modem combo card.
xe%d: watchdog timeout: resetting card The card failed to generate an interrupt acknowledging a transmitted packet. May indicate a PCMCIA
configuration problem.
xe%d: no carrier The card has lost all contact with the network; this usually indicates a cable problem.
SEE ALSO
pccard(4), ifconfig(8)
HISTORY
The xe driver first appeared in FreeBSD 3.3.
AUTHORS
The xe device driver was written by Scott Mitchell <rsm@FreeBSD.org>. This manual page was written by Scott Mitchell <rsm@FreeBSD.org>, and
Tom Rhodes <trhodes@FreeBSD.org>.
BUGS
Supported devices will fail to attach on some machines using the NEWCARD PC Card framework.
Automatic media selection is usually unreliable.
BSD
July 16, 2005 BSD