Password for Firmware woes!

10 More Discussions You Might Find Interesting

1. AIX

Samba Woes

Hi all With the recent virus attacks we have been tasked with upgrading Samba to a "secure" version. Currently running 3.0.29a and looking to put the latest version down 4.6.5. Being a lazy bod I have only ever installed this, a long time ago, when you could get it in BFF filesets. Have...

2. Solaris

Jumpstart woes

Hey, I have been battling with jumpstart for the past few days. Interface nxge0 is set on a vlan: nxge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 0.0.0.0 netmask ff000000 ether 0:21:28:3c:a0:6 nxge998000:...

3. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,...

4. Solaris

Locale woes

Greetings Forumers! I've been fighting a locale problem on a v490 running Solaris 10 u4 (8/07). When I login to the system, I get several "locale" error messages: user1's password: Last login: Wed May 26 2010 09:14:13 -0400 from system1 You have mail. couldn't set locale correctly couldn't...

5. Solaris

OpenBoot Firmware Password Recovery

So in the group of boxes I've inherited, I have one that has a firmware password. I do not know the root password of the machine nor the firmware password. I've tried several things already, such as: removing BIOS battery, double tap the power switch, and several variants of the STOP-A on a PC...

6. Solaris

Firmware password

Hi: I have a Sun Blade 1500 and when I do the Jumpstart with command "boot net - install" asking for the password of the firmware and I was not that password. There any way to reset this password. Thank you very much

7. Solaris

SSH woes

version of solaris: SunOS 5.8 Generic-117350-39 sun4u sparc SUNW,Netra-240 version of SSH: OpenSSH_4.4p1, OpenSSL 0.9.8d 28 Sep 2006 Task: I need to have another Machine ssh into my machine, by either RSA authentication or username/pass authentication. History: In the begining my...

8. Solaris

pkgadd woes

Morning all, I am attempting to load a package from a Solaris 8 CDROM. This fails with the error : "pkgadd: ERROR: unable to access pkgmap file </cdrom/ .........../SUNWlibC/pkgmap> No changes were made to the system" Any help would be appreciated Andy

9. Solaris

Remote CD woes

Good Day, I've remotely mounted a cdrom (no problems theere). The kicker is I can see the directories on the remote CD bout I can't see the files. What am I doing wrong? I'm logged in as root on both systems. All the permissions seem okay - what am I missing? Thanks

10. UNIX for Dummies Questions & Answers

CDROM Woes

Have a Sun CDROM connected to a Ultra machine . Problem is it is not recognizing the drive being connected to it ... When i put the CD in the drive it accepts the CD and zooms initially then quitens out .. The devices drivers are also not created for it ... Any ideas anyone ... I am...

LEARN ABOUT FREEBSD

urtwnfw

URTWNFW(4)						   BSD Kernel Interfaces Manual 						URTWNFW(4)

NAME

     urtwnfw -- Firmware Module for Realtek Wireless driver

SYNOPSIS

     To compile this module into the kernel, place the following line in your kernel configuration file:

	   device urtwnfw

     This will include three firmware images inside the kernel.  If you want to pick only the firmware image for your network adapter choose one
     of the following:

	   device urtwn-rtl8192cfwT
	   device urtwn-rtl8192cfwU
	   device urtwn-rtl8188eufw

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   urtwn-rtl8192cfwT_load="YES"
	   urtwn-rtl8192cfwU_load="YES"
	   urtwn-rtl8188eufw_load="YES"

DESCRIPTION

     This module provides access to firmware sets for the Realtek RTL8188CUS, RTL8188CE-VAU, RTL8188EUS, RTL8188RU and RTL8192CU chip based USB
     WiFi adapters.  It may be statically linked into the kernel, or loaded as a module.

     For the loaded firmware to be enabled for use the license at /usr/share/doc/legal/realtek must be agreed to by adding the following line to
     loader.conf(5):

	   legal.realtek.license_ack=1

FILES

     /usr/share/doc/legal/realtek  urtwnfw firmware license

SEE ALSO

     urtwn(4), firmware(9)

BSD
								  April 25, 2014							       BSD

AIX