I have Power7 server, and I want to know its IP address.
The server have no VGA card, only serial port.
Kindly tell me how to know its IP using serial cable?
I have one monitor,two vga cards,one is nvidia(host)
the other ati rs450(guest),I use this script for use a vm
windows with a native gpu(the ati rs450)
I see this video and seems to be possible using only one
monitor,but I don't understand how to do
The video
QEMU VGA passthrough without a... (0 Replies)
Im trying to make a vga program for linux Im wondering if anyone knows of a simple document on the subject or if someone could show me some basics. What system calls should I use what parameters should I give them. How do I draw a line of pixels green after in vga mode. I prefer nasm but I can use... (2 Replies)
Hi Gurus,
I'm trying to install Oracle on HP-UX 11.23. The Oracle installer needs an X server running on the box. You then start an X client on your PC, export the DISPLAY on UNIX and the installer displays on your PC. The problem is that my HP boxes do not have graphics cards installed. ... (6 Replies)
I am planning on building a fedora box with raid controller (database server).
Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
All,
I see that there are 2 nic card available . How can I know all the details about these 2 nic cards.
-rw-r--r-- 1 root root 10 Apr 16 15:00 hostname.bge0
-rw-r--r-- 1 root other 17 Apr 22 08:56 hostname.bge2
please let me know
thanks
-prasad (4 Replies)
i just got a sun ultra 1 from a guy. (for free)
but it has no graphic card. how do install solaris 8 ? and how do i controll it afterwards ? ssh ?
thanks Mads Nielsen (2 Replies)
what is the procedure of installing a vga on the unix desktop?
i have a dell machine optiplex gx 520
and it doesnt pick the vga i tryed other vga s but graphics are so poor?
pls help. (2 Replies)
Hi there, I'm a newbie so please be patient. I wanted to know if it was possible to run X server on a box w/o a video card. The reason I want to do this is I'd like to have a CDE session from sun workstation into the AIX box. Please let me know if this is feasible. Thanks for your time. (5 Replies)
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)