Login or Register to Ask a Question and Join Our Community


AIX

No Display in LFT Monitor

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems AIX No Display in LFT Monitor
# 1  
Old 01-04-2006
No Display in LFT Monitor
Help! I have installed the GXT250P adapter card and its corresponding
fileset.

However when I try to install my new AOC Monitor to the graphics
adapter card the system was not able to continue it just displays a _
on the monitor. I have already configured my console to work as a LFT.
Another thing is that my monitor, keyboard and mouse will only work
during the SMS utility but will not display the prompt during bootup.

Is there something that I forgot to install or to configure? Thanks!

Chris
Login or Register to Ask a Question

Previous Thread | Next Thread

7 More Discussions You Might Find Interesting

1. Infrastructure Monitoring

Searching for Saas Monitor service which monitor my servers which are sitting in different providers

Sorry if this is the wrong forum Searching for Saas Monitor service which monitor my servers which are sitting in different providers . This monitor tool will take as less CPU as possible , and will send info about the server to main Dashboard. The info I need is CPU / RAM / my servers status (... (1 Reply)
Discussion started by: umen
1 Replies

2. Solaris

No Display on Monitor

I recently had a Sun Ultra 45 shipped to me, when it was shipped it worked fine, but now I cannot get a display on the monitor. It did get a little banged up in shipping. I monitored the POST by connecting to the TTYa port and the only thing that looks like anything is wrong is: Probing I/O... (1 Reply)
Discussion started by: Madrox72
1 Replies

3. Hardware

Fedora 16 dual monitor - dual head - automatic monitor shutdown

Hi, I am experiencing troubles with dual monitors in fedora 16. During boot time both monitors are working, but when system starts one monitor automatically shut down. It happend out of the blue. Some time before when I updated system this happend but then I booted older kernel release and... (0 Replies)
Discussion started by: wakatana
0 Replies

4. UNIX for Advanced & Expert Users

DISPLAY=local_host:0.0 ; export DISPLAY

Hi, from my Windows Workstation I can connect with PUTTY to an AIX 6.1 unix server. On AIX via PUTTY I run DBCA which has a grphical interface. Then : #DISPLAY=local_host:0.0 ; export DISPLAY $(hostname) $(whoami):/appli/oracle/product/10.2.0/db_1/bin#dbca _X11TransSocketINETConnect()... (12 Replies)
Discussion started by: big123456
12 Replies

5. Hardware

Monitor/projector display looks fuzzy

Hi there Not sure if I'm posting this in the right section...but here goes. I'm using an HP Compaq nc8430 laptop. Graphics card according to specs is an ATI Mobility Radeon X1600. It's the first time I installed Linux for use on my personal laptop and I'm having trouble using it with a... (0 Replies)
Discussion started by: notreallyhere
0 Replies

6. Shell Programming and Scripting

Monitor: Read from the monitor

Hello, I would like to write a script that use the display as an input. In the display there is a list of file. I want to use it as an array and this would be the input in my script. Does somebody know how do I make it? (2 Replies)
Discussion started by: mig8
2 Replies

7. UNIX for Dummies Questions & Answers

monitor display settings

Hello new to unix, I have Mac os tiger on a g3 ibook. There are only two monitor settings, the largest being 600x800. Can I add a larger setting from the command line? Thanks, Alicia (0 Replies)
Discussion started by: laughhearty
0 Replies
Login or Register to Ask a Question

LEARN ABOUT FREEBSD

aac

AAC(4)							   BSD Kernel Interfaces Manual 						    AAC(4)

NAME

     aac -- Adaptec AdvancedRAID Controller driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device pci
	   device aac
	   device aacp

	   To compile in debugging code:
	   options AAC_DEBUG=N

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   aac_load="YES"

DESCRIPTION

     The aac driver provides support for the Adaptec AAC family of SCSI Ultra2, Ultra160, and Ultra320, SATA and SAS RAID controllers.

     Access to RAID containers is available via the /dev/aacd? device nodes.  The aacp device enables the SCSI pass-thru interface and allows
     devices connected to the card such as CD-ROMs to be available via the CAM scsi(4) subsystem.  Note that not all cards allow this interface to
     be enabled.

     The /dev/aac? device nodes provide access to the management interface of the controller.  One node exists per installed card.  The aliases
     /dev/afa? and /dev/hpn? exist for compatibility with the Dell and HP versions of management tools, respectively.  If the kernel is compiled
     with the COMPAT_LINUX option, or the aac_linux.ko and linux.ko modules are loaded, the Linux-compatible ioctl(2) interface for the management
     device will be enabled and will allow Linux-based management applications to control the card.

HARDWARE

     Controllers supported by the aac driver include:

     o	 Adaptec AAC-364
     o	 Adaptec RAID 2045
     o	 Adaptec RAID 2405
     o	 Adaptec RAID 2445
     o	 Adaptec RAID 2805
     o	 Adaptec RAID 3085
     o	 Adaptec RAID 31205
     o	 Adaptec RAID 31605
     o	 Adaptec RAID 5085
     o	 Adaptec RAID 51205
     o	 Adaptec RAID 51245
     o	 Adaptec RAID 51605
     o	 Adaptec RAID 51645
     o	 Adaptec RAID 52445
     o	 Adaptec RAID 5405
     o	 Adaptec RAID 5445
     o	 Adaptec RAID 5805
     o	 Adaptec SAS RAID 3405
     o	 Adaptec SAS RAID 3805
     o	 Adaptec SAS RAID 4000SAS
     o	 Adaptec SAS RAID 4005SAS
     o	 Adaptec SAS RAID 4800SAS
     o	 Adaptec SAS RAID 4805SAS
     o	 Adaptec SATA RAID 2020SA ZCR
     o	 Adaptec SATA RAID 2025SA ZCR
     o	 Adaptec SATA RAID 2026ZCR
     o	 Adaptec SATA RAID 2410SA
     o	 Adaptec SATA RAID 2420SA
     o	 Adaptec SATA RAID 2610SA
     o	 Adaptec SATA RAID 2620SA
     o	 Adaptec SATA RAID 2810SA
     o	 Adaptec SATA RAID 2820SA
     o	 Adaptec SATA RAID 21610SA
     o	 Adaptec SCSI RAID 2020ZCR
     o	 Adaptec SCSI RAID 2025ZCR
     o	 Adaptec SCSI RAID 2120S
     o	 Adaptec SCSI RAID 2130S
     o	 Adaptec SCSI RAID 2130SLP
     o	 Adaptec SCSI RAID 2230SLP
     o	 Adaptec SCSI RAID 2200S
     o	 Adaptec SCSI RAID 2240S
     o	 Adaptec SCSI RAID 3230S
     o	 Adaptec SCSI RAID 3240S
     o	 Adaptec SCSI RAID 5400S
     o	 Dell CERC SATA RAID 2
     o	 Dell PERC 2/Si
     o	 Dell PERC 2/QC
     o	 Dell PERC 3/Si
     o	 Dell PERC 3/Di
     o	 Dell PERC 320/DC
     o	 HP ML110 G2 (Adaptec SATA RAID 2610SA)
     o	 HP NetRAID 4M
     o	 IBM ServeRAID 8i
     o	 IBM ServeRAID 8k
     o	 IBM ServeRAID 8s
     o	 ICP RAID ICP5045BL
     o	 ICP RAID ICP5085BL
     o	 ICP RAID ICP5085SL
     o	 ICP RAID ICP5125BR
     o	 ICP RAID ICP5125SL
     o	 ICP RAID ICP5165BR
     o	 ICP RAID ICP5165SL
     o	 ICP RAID ICP5445SL
     o	 ICP RAID ICP5805BL
     o	 ICP RAID ICP5805SL
     o	 ICP ICP5085BR SAS RAID
     o	 ICP ICP9085LI SAS RAID
     o	 ICP ICP9047MA SATA RAID
     o	 ICP ICP9067MA SATA RAID
     o	 ICP ICP9087MA SATA RAID
     o	 ICP ICP9014RO SCSI RAID
     o	 ICP ICP9024RO SCSI RAID
     o	 Legend S220
     o	 Legend S230
     o	 Sun STK RAID REM
     o	 Sun STK RAID EM
     o	 SG-XPCIESAS-R-IN
     o	 SG-XPCIESAS-R-EX
     o	 AOC-USAS-S4i
     o	 AOC-USAS-S8i
     o	 AOC-USAS-S4iR
     o	 AOC-USAS-S8iR
     o	 AOC-USAS-S8i-LP
     o	 AOC-USAS-S8iR-LP

FILES

     /dev/aac?		  aac management interface
     /dev/aacd? 	  disk/container interface

DIAGNOSTICS

     Compiling with AAC_DEBUG set to a number between 0 and 3 will enable increasingly verbose debug messages.

     The adapter can send status and alert messages asynchronously to the driver.  These messages are printed on the system console, and are also
     queued for retrieval by a management application.

SEE ALSO

     kld(4), linux(4), scsi(4), kldload(8)

HISTORY

     The aac driver first appeared in FreeBSD 4.3.

AUTHORS

     Mike Smith <msmith@FreeBSD.org>
     Scott Long <scottl@FreeBSD.org>

BUGS

     This driver is not compatible with Dell controllers that have version 1.x firmware.  The firmware version is the same as the kernel version
     printed in the BIOS POST and driver attach messages.

     The controller is not actually paused on suspend/resume.

BSD
								   July 10, 2009							       BSD