I have a couple of questions, I'm trying to do a mksysb restore from backup and it has just hung at the start.
Anyone know why this is happening and how I can break out of it without someone going to power off the machine from the front panel. I'm logged on through the console cable and not the HMC unfortunately.
I'd guess you have a LED code on the front telling you what is going on.. - anyone local you can ask to check?
Or you have a console or console cable problem.. - that is about where the serial handshake changes so you need a console / cable that can handle both hardware and software handshake.
So it is probably sitting there hung, or waiting for input but you cannot see the progress or what it wants an input for.
HTH
OK, got past that part but now the 2 new hdisks put into the box are not showing up on SMS. In fact the whole hdisk line is missing. Could I have a firmware issue with the new disks put into such and old machine?
Location: on the road for work; home is private time
Posts: 456
Thanks Given: 10
Thanked 108 Times in 100 Posts
1) the slow start may have to do with the IP addresses used: boot device: /pci@80000000/ethernet@c:10.11.2.9,,10.11.2.88,10.11.0.1,00,00
Unless your netmask is 255.0.0.0, or 255.255.0.0 the system may be trying to communicate via the router at 10.11.0.1 (which is not the same network as 10.11.2.* if netmask is 255.255.255.0 (255.255.252 would work i think).
That the disks are not showing up - and you have an HMC. Can you verify that HMC has assigned the values (although, since you say serial port it should be a standalone, i.e., knows no HMC, system.
It is possible that the spot you are using (made from the mksysb image perhaps) does not have support for the adapter built in. If you are able to remake the mksysb image after installing all drivers that could solve an issue like this.
If the mksysb image was based on physical adapters and the drives are showing up now as vscsi (because VIOS is already installed) - it may be another variation of missing drivers.
So, please tell me/us more about the origins of the mksysb image. This may help.
As you have local access, can you try an installation from a DVD? That will tell more about what is not happening.
New disks won't show up in the SMS menu as they aren't bootable devices. once the misuse restore gets to the point where you choose the target disk you will be able to verify that the disks work.
Really without the LED code we are flying blind.
It looks from the screen shot that the tftpboot has completed so I'm going to guess that the LED code is 806, and that means that there is a network configuration issue. Can you provide us with the output of
To see if we can sport what has happened. once the tftpboot is complete the network settings from the Nim server are applied and if they are incorrect the process will fail at that point.
OK I did d a mksysb install alright-ish. Came up with the following error but I managed to copy a unix_up file from somewhere else into /usr/lib/boot/unix_up.
So it came to the reboot and failed with no operating system. I again went into the sms menu and it shows no hard disks. I'm pretty sure the nim install worked OK this time.
Location: on the road for work; home is private time
Posts: 456
Thanks Given: 10
Thanked 108 Times in 100 Posts
That may not be the correct solution.
/unix is normally a symbolic link to the file you copied. If you are going to copy from somewhere it would be better to try and copy the one it booted from. It should still be available via /SPOT (you can run the mount command to see where where everything is coming from. You want to focus on /SPOT and whereever /dev/hd4 is coming from.
Once you have this, run the command bosboot -ad hdiskX to create your boot image on disk. That should get you going. (You can also try without copying from /SPOT, but it is better to continue with a kernel you booted from. There are small, but crucial, differences - unless you know that the one you copied is the one you expect it to be.
Hope this helps.
This User Gave Thanks to MichaelFelt For This Post:
Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client... (0 Replies)
Hi Guys,
We normally have a backup and restore nightly on our Prod machines. We do this via customized script and all unattended. The dilemma that I'm having is the disabling of the cron after the restore.
I created a nim script to disable the cron after the restore has been completed. But... (6 Replies)
Hi All,
I am facing very strange problem. I have created NIM server with 6.1 TL4SP3. I am having SPOT and MKsysb of the same version. I am able to install the client using this spot and mksysb. Now I got the requirement of installing the 5.3 ML11SP3 client. So using the mksysb of 5.3 ML11SP3, I... (3 Replies)
Hello guys
I have been trying to restore a VIO server from NIM using the nim_resource.tar file created from the same VIO lpar. The restoration goes fine and after 99% I get the following error
0516-304 putlvodm: Unable to find device id 000b5f62263b70a50000000000000000 in the Device... (1 Reply)
Hi,
I've recently implemented a NIM backup procedure for 2 virtual AIX5.3 environments running on a JS22 blade server. The images transfer to an old p620 box connected to some old SSA storage, each server backs up a mksysb and a savevg image. Now seeing as this method should be replacing our... (3 Replies)
Hello everyone
Im trying to backup a nim client from nim master but I got this message
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
0042-001 nim:... (2 Replies)
when I type start /SP/console... the console shows up but i cannot type anything over there. I do not understand what might be the reason for that.
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type ESC (
I pressed enter many... (8 Replies)
Can a NIM client mksysb restore be performed via NIM (smitty nim) without the NIM client machine having the NIM server's IP and hostname in its /etc/hosts file? (10 Replies)
Hi Friends,
I've a hard question to ask. I have a NIM server running on AIX 5.3. Now my requirement is that , " From This NIM Server i would like to take the Image of Linux servers ". I mean that using NIM server i should be able to backup / restore the linux Servers.
In Simple terms... (3 Replies)
Hi guys,
I am trying to install a new machine via nim but it is hanging on 0608 => it should be a network issue
here the situation hoping you will be able to help:
server NIM on a subnet/IP 10.36.12.64
client on 161.43.56.25
the ping test is successful but when I launch the isntall it... (9 Replies)