Hello all I hope someone can help me with this. I have a single LPAR which is supplied a rootvg and datavg disk set from a dual VIO server configuration. I see dual path disks for all the datavg disks but only see one path for the rootvg disks.
The client LPAR has the following:
Code:
fcs0 Available C2-T1 Virtual Fibre Channel Client Adapter
fcs1 Available C3-T1 Virtual Fibre Channel Client Adapter
fcs2 Available C4-T1 Virtual Fibre Channel Client Adapter
fcs3 Available C5-T1 Virtual Fibre Channel Client Adapter
As can be seen FCS0 (fscsi0) is missing. From the VIO server which is serving this adapter you have:
Code:
$ lsdev -type adapter | grep fcs
fcs0 Available 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs3 Available 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)]
When I run the map command I get the following:
Code:
$ lsmap -all -npiv
Name Physloc ClntID ClntName ClntOS
------------- ---------------------------------- ------ -------------- -------
vfchost0 U8202.E4B.06605EP-V3-C3 2 LPAR AIX
Status:LOGGED_IN
FC name:fcs0 FC loc code:U78AA.001.WZSG75A-P1-C6-T1
Ports logged in:1
Flags:a<LOGGED_IN,STRIP_MERGE>
VFC client name:fcs0 VFC client DRC:U8202.E4B.06605EP-V2-C2-T1
Name Physloc ClntID ClntName ClntOS
------------- ---------------------------------- ------ -------------- -------
vfchost1 U8202.E4B.06605EP-V3-C4 2 LPAR AIX
Status:LOGGED_IN
FC name:fcs3 FC loc code:U78AA.001.WZSG75A-P1-C6-T2
Ports logged in:2
Flags:a<LOGGED_IN,STRIP_MERGE>
VFC client name:fcs1 VFC client DRC:U8202.E4B.06605EP-V2-C3-T1
This is where it gets interesting on the offending vfchost it can be seen that only 1 port is logged in, whereas on the working port 2 are logged in.
I believe this is the problem but cannot find anything on a general internet trawl to answer why! I believe it is a SAN configuration problem but need evidence with which to beat up the SAN team!
The simple answer is yes they are as follows:
The available adapters are:
Code:
lsdev -Cc adapter
ent4 Available Logical Host Ethernet Port (lp-hea)
fcs0 Available C2-T1 Virtual Fibre Channel Client Adapter
fcs1 Available C3-T1 Virtual Fibre Channel Client Adapter
fcs2 Available C4-T1 Virtual Fibre Channel Client Adapter
fcs3 Available C5-T1 Virtual Fibre Channel Client Adapter
lhea0 Available Logical Host Ethernet Adapter (l-hea)
FCS0 is from the first VIO with the partner adapter FCS2 from the second VIO
The adapter plus children are as follows:
Code:
lsdev -C | grep C2-T1
fcs0 Available C2-T1 Virtual Fibre Channel Client Adapter
fscsi0 Available C2-T1-01 FC SCSI I/O Controller Protocol Device
sfwcomm0 Available C2-T1-01-FF Fibre Channel Storage Framework Comm
The adapter from the other VIO server:
Code:
lsdev -C | grep C4-T1
fcs2 Available C4-T1 Virtual Fibre Channel Client Adapter
fscsi2 Available C4-T1-01 FC SCSI I/O Controller Protocol Device
hdisk0 Available C4-T1-01 XP MPIO Disk XP24000 (Fibre)
hdisk2 Available C4-T1-01 XP MPIO Disk XP24000 (Fibre)
sfwcomm2 Available C4-T1-01-FF Fibre Channel Storage Framework Comm
After a lot of work finding the connection infromation of the offending disks and using the
Code:
mkpath
and
Code:
chpath
command I finally convinced the SAN team that something was not behaving itself on the SAN switch.
A full reset was then run on the switch with all VIO servers and the client LPAR powered off. Once the switch reset had finished I rebooted the VIO servers and the client ran an
Code:
lspath
which showed all disks!
It appears that the
Code:
mkpath chpath
do not actually do anything on the fibre link between the HBA and the switch. I believe I will never find out why the ports dropped!
Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me.
We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out)... (14 Replies)
Hi All :)
i would like to know if i can customize the WWN of the new VFC (NPIV).
Or, if i must move the LPAR on another server with another FCS, i have to change the zoning??
Thanks in advance.
Mario
---------- Post updated 09-21-12 at 02:51 AM ---------- Previous update was 09-20-12 at... (1 Reply)
Hello,
I do not know if this is the right title to use. I have a large dictionary database which has the following structure:
where a b c d e are in English and p q r s t are in a target language., the two separated by the delimiter =.
What I am looking for is a perl script which will take... (5 Replies)
Hello,
I am using fgltty connection (which is actually qputty) to my AIX 6.1 server.
The problem is that PageUp and PageDown keys are not working and i cannot find a way to do the correct mapping for this issue. I read and tried many things that i saw in the web but nothing worked. Well... (2 Replies)
Hi,
I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers?
Thanks,
Ronald (2 Replies)
Hi All..
On to a new implementation with AIX 7.1 san boot from EMC disks (Using NPIV). Anyone played with this recently?
Wondering if we need PowerPath on the AIX clients or has native MPIO matured to replace it. Thoughts?
Thanks
Mr B (6 Replies)
Hi All,
I'm preparing to migrate some servers from vscsi to pass-thru NPIV. I am planning to have the SAN team move the exact LUNs from vio1/vio2 to those two VWWN through NPIV.
My question is on the partition itself.. right now, let's say I have hdisk0/1/2/3/4 that are part of datavg. They... (2 Replies)
Is anyone here using NPIV with AIX? If you are, what type of switch are you connected to? Also, please share some impressions of NPIV over traditional port-to-port LUN assignments. We are looking to move to NPIV and need some convincing argume... I mean information. (2 Replies)
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Dear all
I have a SCO server with a mapping to a NFS share on a linux server. The Linux server went down and the mapping on the SCO server failed. Now when I run the df -k command on the SCO server, the NFS mapping is showing the following error:
df: cannot statfs... (5 Replies)