Hope you all doing well. I have configured a powerHA with 2 RG. Whenever am moving a RG to the 2 node, the 2 node becoming unavailable. But its working fine in the console also cluster not having any issues. Once i ran the tcp/ip configuration via smitty , the node becoming available.
As per the client I have configured only 2 ip's for the cluster. One public and the one for service(hacmp) ip. Please assist.
Could you start clinfoES with (on both nodes this needs to be done)
Code:
startsrc -s clinfoES
and check if snmpd is running? (on both nodes this needs to be done)
Code:
lssrc -s snmpd
if not start it up and wait for while and you should be able use
Code:
cldump
and
Code:
clstat
Could you post output from that cldump please?
About the log files. That's strange because movement RG failed and there is no entry about it. Are you checking right file. You can have two hacmp.out files in different location and just one is being used. Please check with
Code:
odmget HACMPlogs | grep -p hacmp.out
and please check which has latest time-stemp on it. There should be error entry. You need to check this file on node from which executing movement of RG.
Verification is fine that's good but could you check this file
Code:
/usr/es/sbin/cluster/etc/rhosts
if it's same on both nodes? More info about that file here and here
---------- Post updated at 12:34 PM ---------- Previous update was at 12:22 PM ----------
I read again your first post. What do you mean by "the 2 node becoming unavailable"?
Is movement of RG being done successfully to another node?
I have attached the mentioned details. I have identified whenever I move the RG to the another node,there is change in the default gateway on the another node(which got the RG) {output is in the file} . And the clstat, cldump are seems not configured properly. Kindly check the attached files and advice. Thanks much.
Movement of the RG is successful and its running fine, but the node which taken over the RG becoming unavailable from the other subnet. I hope its because of the gateway issue. Whenever its taking over the RG it's losing it's default gateway info.
hello
ive 2 nodes aix 6100-04-10-1119 with hacmp 6.1.0.0
my qustion is :
can i add default gateway to one member node with hacmp a live or to do take over to realse one of the members ?
thanks
When it is urgent, then open the thread up in the appropriate subforum next time, thanks. (3 Replies)
Does anyone has idea about, what is the ibm standard HACMP trip interval?
We have 20 second.
lssrc -ls topsvcs
Subsystem Group PID Status
topsvcs topsvcs 1843200 active
Network Name Indx Defd Mbrs St Adapter ID Group ID
HB Interval =... (7 Replies)
Hi,
I'm new to HACMP. Currently I setup a cluster with nfs cross-mount follow this guide:
kristijan.org NFS cross-mounts in PowerHA/HACMPMy cluster has two nodes: erp01 and erp02.
I'm using nfs4 with filesystem for nfs is: /sapnfs
Cluster start without problems. But I cannnot move RG (with... (3 Replies)
Hi,
I am setting up a hacmp oracle cluster with 2 resource groups - one on each node.
Binaries are local - so is configuration but its the same on both nodes - so are the startscripts.
If I start the cluster, each DB comes up nicely on its homenode.
Now I have the problem that when I... (1 Reply)
Hi,
I have a running HACMP Cluster with two nodes. Its working in active/passive mode. (i.e Out of the two nodes in the cluster one will be active and the other one will be on standby. If first node fails the other takes over)
1. There is a Service IP associated with the cluster. Now the... (2 Replies)
hi,
when I do a failover, hacmp always starts db2 but recently it fails to start db2..noticed the issue is db2nodes.cfg is not modified by hacmp and is still showing primary node..manually changed the node name to secondary after which db2 started immediately..unable to figure out why hacmp is... (4 Replies)
I know I can use an ls -l junk1 command to get a listing of all files in the directory junk1, but I was wondering how I'd go about going through the files in junk1 in a for-in loop and issuing the ls -l command on them one by one.
This is what I have so far:
for file in $(ls -a $1)
do
ls... (1 Reply)
We have a script which will move the files from the each user home directory to other location to process the file in the server.
The users put files in their home directory using FTP and the user home dir have 775 permission so the the application user can move the files from the home path to... (11 Replies)