ssa performances

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

File alignment and performances... (difficult)

Hello ! I will use my best english possible to explain my objective. I'm french so pardon for the lack of precision... So, what i would like to do in shell script (but you will possibly answer ''not possible in script'' have to use low level langage or something like that) is described below....

2. Solaris

Performances with RAID 5

Hello every body, Maybe someone could help me. I have a SUN Server with 6 disks, each of 150 Gb. I have mounted the first two disk in mirror (RAID1) for the system files. I have mounted 3 disks in RAID5 for users file systems. I kept the last one as spare and I have mounted it standalone...

3. Linux

grep -f CPU performances

Hi I would like to thank you all for this excellent forum. Today i tried to compare two files and i get some problem with it. I have two files and i want to get all the data that match the first file like this File1 (pattern file) ___________________________ 9007 9126 9918 9127 ...

4. AIX

Removing Faulty Disk SSA

Hi Experts, I have configured A D40 Array. There is an faulty disk which is not part of an raid volume but shows fault in the diagnostics. pdisk15 U0.1-P1-I1/Q1-W40AA83CC2400D SSA160 Physical Disk Drive ( MB) Is there a way to stop this...

5. AIX

Procedure for removing SSA array

Hi All, What's the proper procedure for removing SSA arrays? Is the procedure like these? - rmdev ssa disk - physical turn off the ssa - cfgmgr There's no more filesystem or logical volume on it. It's just pdisk and hdisk. Thanks in advance, itik

6. AIX

mirroring ssa to san

Hi guys, I'd like to share my migration/mirroring of ssa to san. No downtime for users, probably I/O performance. here's the step: 1 After the lun had been carved on the SAN and the connections had been done on AIX fiber card 2 “lspv” and look for the new SAN hdisk? on the bottom, say...

7. AIX

migrate from ssa to san

Hi, Do you have procedures to migrate ssa disks to san disk? I don't have testing environment and I want my file system be migrated one at a time. I want it to be fast, I have only 15-20 hours to do it on every sunday 1PM till monday 7am. My largest file system is about 150G. The AIX is...

8. AIX

Problem with a SSA drive

I've a problem with an IBM StorageWorks - Seagate SSA drive, model ST373453LC (IBM P/N 24P3733, Type S53D073, 72,8 GB 15K - USCSI 4 - 320 SSA). I bought this disk used but working; it came from an unknown IBM SSA storage array. I've removed the SCA - SSA adapter (IBM 18P3051 - 001 - R0) and i tried...

9. AIX

updating ssa

I am in the process of updating ssa adapters, drives and enclosures and wanted to know if there are any caveats that anyone would like to share. The documentation is not very clear on the ordering of the updates. Any tips would be appreciated.

10. AIX

RS6000 SSA Raid question

Hi Can I add disks on the fly to extend the capacity of an existing RAID 5 volume? It's created on a 4P Advanced SSA Raid Adapter. I need to extend a volume group, so I figured it would be easiest to extend the "physical disk" which is a RAID5 volume. Thanks.

LEARN ABOUT OPENSOLARIS

ucodeadm

ucodeadm(1M)						  System Administration Commands					      ucodeadm(1M)

NAME

       ucodeadm - update processor microcode

SYNOPSIS

       /usr/sbin/ucodeadm -v

       /usr/sbin/ucodeadm -umicrocode-text-file

       /usr/sbin/ucodeadm -i [-R path] microcode-text-file

DESCRIPTION

       The ucodeadm utility can be used to report running microcode revision on the processors, update microcode, or install microcode on the tar-
       get system to be used during the boot process.

       The microcode-text-file can be obtained from processor vendors.

OPTIONS

       -v			 Report microcode revision.

       -u microcode-text-file	 Update microcode on all cross-call interrupt ready processors.

       -i microcode-text-file	 Install microcode files on target system to be used during the next   boot cycle. The text file  name	must  have
				 the vendor name prefix,    such as "intel" or "amd".

				 By default the microcode files will be installed at:

				    /platform/i86pc/ucode/$VENDORSTR/

				 where VENDORSTR is either "GenuineIntel" or "AuthenticAMD".

       -R alternate path	 Install microcode path in the alternate path.

EXAMPLES

       Example 1 Reporting the Microcode Revision

       The following example displays the microcode revision that is currently running:

	 # ucodeadm -v

       Example 2 Updating the Processor Microcode

       The following example updates the processor microcode to intel-ucode.txt:

	 # ucodeadm -u intel-ucode.txt

       Example 3 Installing the Microcode on the Target System

       The following example installs the microcode on the target system, /export/ucode-path:

	 # ucodeadm -i -R /export/ucode-path intel-ucode.txt

       If  an alternate path is used when installing the microcode on the target system, the installed microcode file is not used on the next boot
       cycle.

EXIT STATUS

       The following exit values are returned:

       0     Successful completion.

       >0    An error occurred.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Stable			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       psradm(1M), psrinfo(1M), attributes(5)

SunOS 5.11							    10 Jul 2007 						      ucodeadm(1M)

AIX