Virtualizing the Fiber card (VFC) on P595


 
Thread Tools Search this Thread
Operating Systems AIX Virtualizing the Fiber card (VFC) on P595
# 1  
Old 09-06-2011
[Solved] Virtualizing the Fiber card (VFC) on P595

Hi,

We have a P595 machine with a dual port Fiber card per VIOs.

We have two VIOs in the box.

VIO1: ---> 2 port Fiber Card
VIO2: ---> 2 port Fiber Card

One port on each fiber card is utilized. Connected to SAN switches. We are getting all disks from SAN both for VIOs and LPARs.

Now we have connected our tape library to our SAN switches and from switches to our P595 box Fiber cards. We need to Virtualize the Fiber card in order to take backups.

----> Now if we Virtualize the fiber card then wouldnt it disturb the Fiber card on the machines? The disks comming from SAN would no longer be available. I found this link to do this:

NPIV Setup and Configuration to Virtualize Fibre-channel card on IBM p6 - AIX & System P Community

Regards,

---------- Post updated at 08:33 AM ---------- Previous update was at 03:26 AM ----------

Well folks this is how its going to work.

If one port is free we can utilize it and no need to worry about the other port as the vfc that would be created would be mapped "manually" to the available fcs

Regards,
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. AIX

AIX: DLPAR VFC - HMC v9

Hey All, I have running dual VIOS on a P9 systems, and just created a new LPAR profile. My objective is to create LPAR Client VFC adapters, and then DLPAR VFC Server adapters on the VIOS. In the HMC v9 Enhanced GUI, I have DLPAR a VFC adapter to both VIOS, however, you can't specify the... (1 Reply)
Discussion started by: aixkidbee
1 Replies

2. AIX

Virtualizing Physical Machine

Hi Experts - we have power710 (no VIOs) that is already connected to hmc and everything . I already have a Physical LPAR in there and network configured . Now I plan to delete that LPAR and then put Virtualization code (COD) to virtualize that machine by building VIO servers and stuff.Also ordered... (9 Replies)
Discussion started by: JME2015
9 Replies

3. AIX

HMC Hardware Discovery does not work for p595 frames

Hi, I require help with hardware discovery while running a command from an HMC with firmware V7.3.5 SP 3. The two frames I am running the command for are p 5 595's. Command input: lshwres -m swdc-c02-9119-595-SN02780CF -r io --rsubtype slotchildren -F lpar_name Error output: The managed... (1 Reply)
Discussion started by: AIXNEWBIE62
1 Replies

4. AIX

Powerha on P595 and Blade HX5 Type 787

Hello Everyobdy! Is it poosible to implement PowerHa on Different Server like power 595 and Blade HX5 Type 787 Thanks in Advance (8 Replies)
Discussion started by: Vit0_Corleone
8 Replies

5. UNIX for Advanced & Expert Users

Help with old DG/UX machine, virtualizing?

Hey all, We have an old Data General Unix system (DG/UX) on an old AViiON machine. That DG system is Intel-based (PentiumPro) and we are trying to virtualize / emulate it. DG was a clever system, as it cannot be installed on a 'regular' x86 machine, only on an AViiON box. I think I figured out... (2 Replies)
Discussion started by: dgux
2 Replies

6. AIX

p595 LPAR no longer sees SAN boot disk

Hello, we have a wierd and urgent problem, with a few of our p595 LPARs running AIX 5.3. The LPARs ran AIX 5.3 TL 7 and booted off EMC SAN disks, using EMC Powerpath. Every boot we run "pprootdev on" and "pprootdev fix". We can issue "bosboot -a" and we can reboot the machines. Now, on two... (2 Replies)
Discussion started by: rwesterik
2 Replies

7. HP-UX

Setting Fiber Card to Auto Negotiate

I have the Fiber Card assigned to a vPar and I am trying to use it with our HP EVA 4000. Our SAN switch is only a 2GB switch. The card has three LED lights labeled 4GB, 2GB and 1GB and the 4GB light has an amber light. I need to change the link speed, how do you do this on HP-UX? Also here is... (3 Replies)
Discussion started by: scotbuff
3 Replies

8. AIX

How to know the hardware configuration on P595 LAPRs

The p595 have 6 Lpars, not all hardware resource assigned to 6 lpars. which command can list all hardware configuration on p595? Do I need go to each lapr to list? (2 Replies)
Discussion started by: rainbow_bean
2 Replies

9. Solaris

Identify fiber card

All, Is there a way to identify which fiber card (brand) I have in my system? I believe my solaris 8 box has an LP9002LE card, I'm just not 100% sure. Thanks, Kevin (4 Replies)
Discussion started by: kjbaumann
4 Replies
Login or Register to Ask a Question
SCF_Card_reset(3SMARTCARD)				    Smartcard Library Functions 				SCF_Card_reset(3SMARTCARD)

NAME
SCF_Card_reset - perform a reset of a smartcard SYNOPSIS
cc [ flag... ] file... -lsmartcard [ library...] #include <smartcard/scf.h> SCF_Status_t SCF_Card_reset(SCF_Card_t card); PARAMETERS
card The card (from SCF_Terminal_getCard(3SMARTCARD)) to be reset DESCRIPTION
The SCF_Card_reset() function causes the specified smartcard to be reset by the terminal. A card can be reset only if it has not been locked (with SCF_Card_lock(3SMARTCARD)) by another client. A client wishing to reset a card should either first call SCF_Card_lock() to obtain the card lock, or be prepared to retry the reset operation if it fails because another client holds the card lock. When the card is reset, any SCF_Card_t object representing the card will continue to remain valid after the reset. When the reset occurs, an SCF_EVENT_CARDRESET event will be sent to all registered event listeners for the terminal (assuming they registered for this event). This is the only notification of a reset provided to SCF clients. When a client receives this event, it should be prepared to reinitialize any state on the card that might have been interrupted by the reset. New information about the card (for example, ATR, if it changed) can also be available from SCF_Card_getInfo(3SMARTCARD). RETURN VALUES
If the card is successfully reset, SCF_STATUS_SUCCESS is returned. Otherwise, the status of the card remains unchanged and an error value is returned. ERRORS
The SCF_Card_reset() function will fail if: SCF_STATUS_BADHANDLE The specified card has been closed or is invalid. SCF_STATUS_CARDLOCKED The card cannot be reset because another client holds a lock on the card. SCF_STATUS_CARDREMOVED The card cannot be reset because the card represented by the SCF_Card_t has been removed. SCF_STATUS_COMMERROR The connection to the server was lost. SCF_STATUS_FAILED An internal error occured. EXAMPLES
Example 1: Reset a card. SCF_Status_t status; SCF_Card_t myCard; /* (...call SCF_Terminal_getCard to open myCard...) */ status = SCF_Card_lock(myCard, SCF_TIMEOUT_MAX); if (status != SCF_STATUS_SUCCESS) exit(1); status = SCF_Card_reset(myCard); if (status != SCF_STATUS_SUCCESS) exit(1); status = SCF_Card_unlock(myCard); if (status != SCF_STATUS_SUCCESS) exit(1); /* ... */ ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ |MT-Level |MT-Safe | +-----------------------------+-----------------------------+ SEE ALSO
libsmartcard(3LIB), SCF_Card_getInfo(3SMARTCARD), SCF_Card_lock(3SMARTCARD), SCF_Terminal_addEventListener(3SMARTCARD), SCF_Terminal_get- Card(3SMARTCARD), attributes(5) SunOS 5.10 28 Feb 2001 SCF_Card_reset(3SMARTCARD)