Hi
I have written a script to send email alerts when load of my linux server reaches max point
I keep getting false emails thought the load is normal , looks like same email is generated again and again - called from cron tab
checked if the tempfile is present , no it is not , cleaned... (22 Replies)
I am planning to choose my career as Unix/Linux Admin or a DBA. But I have come to know from forums and few admins like the job will be 24/7. I have few questions on that.
Can we get "DAY" shifts in any one of the admin Job ?
Can't we have shift timings in any company ?
Eventhough the... (7 Replies)
I'm currently a Windows admin and have wanted to jump ship to the *nix side for a while now. I've been studying both through an lpic level 1 manual as I have time (focusing on debian), and a solaris 10 cert book. The problem is I only have a handful of hours a week to study, and my current job... (3 Replies)
Hi All,
I am using the below Script to enter a line in the File:
#!/bin/ksh
# To delete the last line if it contains the pattern Redirect permanent / Virgin Atlantic Airways - Popup
echo "Enter the URL that should point to the particular microsite"
read url
# To delete the last line if it... (0 Replies)
Hi,
I'm new to UNIX and am trying to learn shell scripting in order to work on an interface that I inherited when a co-worker left. I need to be able to check to see whether a file exists to determine whether the FTP has taken place, but in testing, the if statement always evaluates as false,... (3 Replies)
i want to delete every newline and every line which starts with "RECORD......." in a file.
FILE:
Record 61391 in base BROCKHAUS (Timestamp: 2008-04-09 11:38:38)
UNTERTITEL :
Gräfin (seit 1707 Reichsgräfin) von, * Schwerin 4. 2. 1686, + Berlin
21. 10. 1744; wurde
Record 61392 in base BROCKHAUS... (4 Replies)
We have requirments to not allow a userid login abilities but allow users to 'su' to it. In solaris I normally set the shell in /etc/passwd to bin/false. THis does not work on Linux, any suggestions would help. (1 Reply)
CGCONFIG.CONF(5) File Formats Manual CGCONFIG.CONF(5)NAME
cgconfig.conf - libcgroup configuration file
DESCRIPTION
cgconfig.conf is a configuration file used by libcgroup to define control groups, their parameters and their mount points. The file con-
sists of mount , group and default sections. These sections can be in arbitrary order and all of them are optional. Any line starting with
'#' is considered a comment line and is ignored.
mount section has this form:
mount {
<controller> = <path>;
...
}
controller
Name of the kernel subsystem. The list of subsystems supported by the kernel can be found in /proc/cgroups file. Named hierarchy can
be specified as controller "name=<somename>". Do not forget to use double quotes around this controller name (see examples below).
Libcgroup merges all subsystems mounted to the same directory (see Example 1) and the directory is mounted only once.
path The directory path where the group hierarchy associated to a given controller shall be mounted. The directory is created automati-
cally on cgconfig service startup if it does not exist and is deleted on service shutdown.
If no mount section is specified, no controllers are mounted.
group section has this form:
group <name> {
[permissions]
<controller> {
<param name> = <param value>;
...
}
...
}
name Name of the control group. It can contain only characters, which are allowed for directory names. The groups form a tree, i.e. a
control group can contain zero or more subgroups. Subgroups can be specified using '/' delimiter.
The root control group is always created automatically in all hierarchies and it is the base of the group hierarchy. It can be
explicitly specified in cgconfig.conf by using '.' as group name. This can be used e.g. to set its permissions, as shown in Example
6.
When the parent control group of a subgroup is not specified it is created automatically.
permissions
Permissions of the given control group on mounted filesystem. root has always permission to do anything with the control group.
Permissions have the following syntax:
perm {
task {
uid = <task user>;
gid = <task group>;
fperm = <file permissions>
}
admin {
uid = <admin name>;
gid = <admin group>;
dperm = <directory permissions>
fperm = <file permissions>
}
}
task user/group Name of the user and the group, which own the tasks file of the control group. Given fperm then specify the file
permissions. Please note that the given value is not used as was specified. Instead, current file owner permis-
sions are used as a "umask" for group and others permisions. For example if fperm = 777 then both group and others
will get the same permissions as the file owner.
admin user/group Name of the user and the group which own the rest of control group's files. Given fperm and dperm control file and
directory permissions. Again, the given value is masked by the file/directory owner permissions.
Permissions are only apply to the enclosing control group and are not inherited by subgroups. If there is no perm section in the
control group definition, root:root is the owner of all files and default file permissions are preserved if fperm resp. dperm are
not specified.
controller
Name of the kernel subsystem. The section can be empty, default kernel parameters will be used in this case. By specifying con-
troller the control group and all its parents are controlled by the specific subsystem. One control group can be controlled by mul-
tiple subsystems, even if the subsystems are mounted on different directories. Each control group must be controlled by at least one
subsystem, so that libcgroup knows in which hierarchies the control group should be created.
The parameters of the given controller can be modified in the following section enclosed in brackets.
param name
Name of the file to set. Each controller can have zero or more parameters.
param value
Value which should be written to the file when the control group is created. If it is enclosed in double quotes `"', it can
contain spaces and other special characters.
If no group section is specified, no groups are created.
default section has this form:
default {
perm {
task {
uid = <task user>;
gid = <task group>;
fperm = <file permissions>
}
admin {
uid = <admin name>;
gid = <admin group>;
dperm = <directory permissions>
fperm = <file permissions>
}
}
}
Content of the perm section has the same form as in group section. The permissions defined here specify owner and permissions of groups and
files of all groups, which do not have explicitly specified their permissions in their group section.
EXAMPLES
Example 1
The configuration file:
mount {
cpu = /mnt/cgroups/cpu;
cpuacct = /mnt/cgroups/cpu;
}
creates the hierarchy controlled by two subsystems with no groups inside. It corresponds to the following operations:
mkdir /mnt/cgroups/cpu
mount -t cgroup -o cpu,cpuacct cpu /mnt/cgroups/cpu
Example 2
The configuration file:
mount {
cpu = /mnt/cgroups/cpu;
"name=scheduler" = /mnt/cgroups/cpu;
"name=noctrl" = /mnt/cgroups/noctrl;
}
group daemons {
cpu {
cpu.shares = "1000";
}
}
group test {
"name=noctrl" {
}
}
creates two hierarchies. One hierarchy named scheduler controlled by cpu subsystem, with group daemons inside. Second hierarchy is named
noctrl without any controller, with group test. It corresponds to following operations:
mkdir /mnt/cgroups/cpu
mount -t cgroup -o cpu,name=scheduler cpu /mnt/cgroups/cpu
mount -t cgroup -o none,name=noctrl none /mnt/cgroups/noctrl
mkdir /mnt/cgroups/cpu/daemons
echo 1000 > /mnt/cgroups/cpu/daemons/www/cpu.shares
mkdir /mnt/cgroups/noctrl/tests
The daemons group is created automatically when its first subgroup is created. All its parameters have the default value and only root can
access group's files.
Since both cpuacct and cpu subsystems are mounted to the same directory, all groups are implicitly controlled also by cpuacct subsystem,
even if there is no cpuacct section in any of the groups.
Example 3
The configuration file:
mount {
cpu = /mnt/cgroups/cpu;
cpuacct = /mnt/cgroups/cpu;
}
group daemons/www {
perm {
task {
uid = root;
gid = webmaster;
fperm = 770;
}
admin {
uid = root;
gid = root;
dperm = 775;
fperm = 744;
}
}
cpu {
cpu.shares = "1000";
}
}
group daemons/ftp {
perm {
task {
uid = root;
gid = ftpmaster;
fperm = 774;
}
admin {
uid = root;
gid = root;
dperm = 755;
fperm = 700;
}
}
cpu {
cpu.shares = "500";
}
}
creates the hierarchy controlled by two subsystems with one group and two subgroups inside, setting one parameter. It corresponds to the
following operations (except for file permissions which are little bit trickier to emulate via chmod):
mkdir /mnt/cgroups/cpu
mount -t cgroup -o cpu,cpuacct cpu /mnt/cgroups/cpu
mkdir /mnt/cgroups/cpu/daemons
mkdir /mnt/cgroups/cpu/daemons/www
chown root:root /mnt/cgroups/cpu/daemons/www/*
chown root:webmaster /mnt/cgroups/cpu/daemons/www/tasks
echo 1000 > /mnt/cgroups/cpu/daemons/www/cpu.shares
# + chmod the files so the result looks like:
# ls -la /mnt/cgroups/cpu/daemons/www/
# admin.dperm = 755:
# drwxr-xr-x. 2 root webmaster 0 Jun 16 11:51 .
#
# admin.fperm = 744:
# --w-------. 1 root webmaster 0 Jun 16 11:51 cgroup.event_control
# -r--r--r--. 1 root webmaster 0 Jun 16 11:51 cgroup.procs
# -r--r--r--. 1 root webmaster 0 Jun 16 11:51 cpuacct.stat
# -rw-r--r--. 1 root webmaster 0 Jun 16 11:51 cpuacct.usage
# -r--r--r--. 1 root webmaster 0 Jun 16 11:51 cpuacct.usage_percpu
# -rw-r--r--. 1 root webmaster 0 Jun 16 11:51 cpu.rt_period_us
# -rw-r--r--. 1 root webmaster 0 Jun 16 11:51 cpu.rt_runtime_us
# -rw-r--r--. 1 root webmaster 0 Jun 16 11:51 cpu.shares
# -rw-r--r--. 1 root webmaster 0 Jun 16 11:51 notify_on_release
#
# tasks.fperm = 770
# -rw-rw----. 1 root webmaster 0 Jun 16 11:51 tasks
mkdir /mnt/cgroups/cpu/daemons/ftp
chown root:root /mnt/cgroups/cpu/daemons/ftp/*
chown root:ftpmaster /mnt/cgroups/cpu/daemons/ftp/tasks
echo 500 > /mnt/cgroups/cpu/daemons/ftp/cpu.shares
# + chmod the files so the result looks like:
# ls -la /mnt/cgroups/cpu/daemons/ftp/
# admin.dperm = 755:
# drwxr-xr-x. 2 root ftpmaster 0 Jun 16 11:51 .
#
# admin.fperm = 700:
# --w-------. 1 root ftpmaster 0 Jun 16 11:51 cgroup.event_control
# -r--------. 1 root ftpmaster 0 Jun 16 11:51 cgroup.procs
# -r--------. 1 root ftpmaster 0 Jun 16 11:51 cpuacct.stat
# -rw-------. 1 root ftpmaster 0 Jun 16 11:51 cpuacct.usage
# -r--------. 1 root ftpmaster 0 Jun 16 11:51 cpuacct.usage_percpu
# -rw-------. 1 root ftpmaster 0 Jun 16 11:51 cpu.rt_period_us
# -rw-------. 1 root ftpmaster 0 Jun 16 11:51 cpu.rt_runtime_us
# -rw-------. 1 root ftpmaster 0 Jun 16 11:51 cpu.shares
# -rw-------. 1 root ftpmaster 0 Jun 16 11:51 notify_on_release
#
# tasks.fperm = 774:
# -rw-rw-r--. 1 root ftpmaster 0 Jun 16 11:51 tasks
The daemons group is created automatically when its first subgroup is created. All its parameters have the default value and only root can
access the group's files.
Since both cpuacct and cpu subsystems are mounted to the same directory, all groups are implicitly also controlled by the cpuacct subsys-
tem, even if there is no cpuacct section in any of the groups.
Example 4
The configuration file:
mount {
cpu = /mnt/cgroups/cpu;
cpuacct = /mnt/cgroups/cpuacct;
}
group daemons {
cpuacct{
}
cpu {
}
}
creates two hierarchies and one common group in both of them. It corresponds to the following operations:
mkdir /mnt/cgroups/cpu
mkdir /mnt/cgroups/cpuacct
mount -t cgroup -o cpu cpu /mnt/cgroups/cpu
mount -t cgroup -o cpuacct cpuacct /mnt/cgroups/cpuacct
mkdir /mnt/cgroups/cpu/daemons
mkdir /mnt/cgroups/cpuacct/daemons
In fact there are two groups created. One in the cpuacct hierarchy, the second in the cpu hierarchy. These two groups have nothing in com-
mon and can contain different subgroups and different tasks.
Example 5
The configuration file:
mount {
cpu = /mnt/cgroups/cpu;
cpuacct = /mnt/cgroups/cpuacct;
}
group daemons {
cpuacct{
}
}
group daemons/www {
cpu {
cpu.shares = "1000";
}
}
group daemons/ftp {
cpu {
cpu.shares = "500";
}
}
creates two hierarchies with few groups inside. One of the groups is created in both hierarchies.
It corresponds to the following operations:
mkdir /mnt/cgroups/cpu
mkdir /mnt/cgroups/cpuacct
mount -t cgroup -o cpu cpu /mnt/cgroups/cpu
mount -t cgroup -o cpuacct cpuacct /mnt/cgroups/cpuacct
mkdir /mnt/cgroups/cpuacct/daemons
mkdir /mnt/cgroups/cpu/daemons
mkdir /mnt/cgroups/cpu/daemons/www
echo 1000 > /mnt/cgroups/cpu/daemons/www/cpu.shares
mkdir /mnt/cgroups/cpu/daemons/ftp
echo 500 > /mnt/cgroups/cpu/daemons/ftp/cpu.shares
Group daemons is created in both hierarchies. In the cpuacct hierarchy the group is explicitly mentioned in the configuration file. In the
cpu hierarchy the group is created implicitly when www is created there. These two groups have nothing in common, for example they do not
share processes and subgroups. Groups www and ftp are created only in the cpu hierarchy and are not controlled by the cpuacct subsystem.
Example 6
The configuration file:
mount {
cpu = /mnt/cgroups/cpu;
cpuacct = /mnt/cgroups/cpu;
}
group . {
perm {
task {
uid = root;
gid = operator;
}
admin {
uid = root;
gid = operator;
}
}
cpu {
}
}
group daemons {
perm {
task {
uid = root;
gid = daemonmaster;
}
admin {
uid = root;
gid = operator;
}
}
cpu {
}
}
creates the hierarchy controlled by two subsystems with one group having some special permissions. It corresponds to the following opera-
tions:
mkdir /mnt/cgroups/cpu
mount -t cgroup -o cpu,cpuacct cpu /mnt/cgroups/cpu
chown root:operator /mnt/cgroups/cpu/*
chown root:operator /mnt/cgroups/cpu/tasks
mkdir /mnt/cgroups/cpu/daemons
chown root:operator /mnt/cgroups/cpu/daemons/*
chown root:daemonmaster /mnt/cgroups/cpu/daemons/tasks
Users which are members of the operator group are allowed to administer the control groups, i.e. create new control groups and move pro-
cesses between these groups without having root privileges.
Members of the daemonmaster group can move processes to the daemons control group, but they can not move the process out of the group. Only
the operator or root can do that.
RECOMMENDATIONS
Keep hierarchies separated
Having multiple hierarchies is perfectly valid and can be useful in various scenarios. To keeps things clean, do not create one group in
multiple hierarchies. Examples 4 and 5 show how unreadable and confusing it can be, especially when reading somebody elses configuration
file.
Explicit is better than implicit
libcgroup can implicitly create groups which are needed for the creation of configured subgroups. This may be useful and save some typing
in simple scenarios. When it comes to multiple hierarchies, it's better to explicitly specify all groups and all controllers related to
them.
FILES
/etc/cgconfig.conf
default libcgroup configuration file
SEE ALSO
cgconfigparser (8)
BUGS
Parameter values must be single strings without spaces. Parsing of quoted strings is not implemented.
CGCONFIG.CONF(5)