PCI Ethernet NIC's for IBM RISC 600 Model B50

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

error message risc 43p model 150

hello, i am new to this forum and i really could use some help, we have a risc 43p model 150 ibm server and we run prophet 21 on it. after the box boots up and then we activate prophet 21 we get a error message saying "The data space of the process is not enough for the shm segment (1176) │ ...

2. AIX

interface collisions on ethernet nic

Hi, is there any method to check the interface collisions on ethernet NIC in AIX. I know that in Solaris it's netstat -i but I've written that in AIX it doesn't show this. Thanks&regards, p

3. UNIX for Advanced & Expert Users

Determine the ethernet (NIC) card speed.

Hi, Does anyone know how can I determine the maximum capable speed on a network interface card for different OS like HP, Sun, AIX and Linux. I am aware of the tool "ethtool" which can be used for Linux. Are there any handly commands or /proc files where I can get this info depending on the OS....

4. AIX

AIX -How to find which NIC is on which PCI card

Hi All, How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v Any idea? Thanks.

5. Red Hat

changing ethernet NIC names?

I have an RHEL 5 server with 2 Broadcom on-board NICs and 2 quad-port Intel NICs. After I installed the OS, the Intel NICs became eth0-7, and the onboards are eth8 and eth9. I really need the onboard NICs to be eth0 and eth1 (I have plans to later remove the quad-ports and replace them with 10gE...

6. AIX

Trying to hookup my notebook to my IBM 7046-B50 type rack RS6000/AIX system

Greetings to all: Gentlemen, I've tried extremely hard to hookup my notebook via the hyperterminal to my AIX box (IBM 7046-B50) by virtue of a cross-over cable. Don't know really whats going on ......to my surprise. The notebook says its hookedup successfully but shows no unix login prompt on...

7. Programming

IBM Risc migration

Hi all, I have been dealing with the following problem one week now without any progress. I've a source code written in C which is using X libraries in order to create a graphical interface to visualise results produced by another code written in Fortran. The README file of the C code says...

8. AIX

Add PCI ethernet card?

Hi everyone, I recently inherited an IBM RS/6000 43P 150, and it appears that the on board ethernet is dead. Can I put in a PCI ethernet card and use that as the default ethernet connection (as opposed to the one on the motherboard)? If so, what type of card can I use and how does one configure...

9. AIX

PCI Ethernet Cards for IBM RISC 6000 - B50's

I am trying to find PCI Ethernet cards that are compatible with the IBM RISC 6000 - B50 Power PC. None of the regular NIC's seem to have AIX drivers. Does anyone know of AIX drivers for standard PCI Ethernet NIC's or a non IBM NIC that works with the Model B50 at 10/100 MB ?

10. AIX

Ibm Risc/6000 Os

:o Unix Sirs, :eek:RE: IBM RISC/6000 1990 Used on Application: Image buffer: 3D "Catia" (3D "Autocad" sim.) engineering C.A.D. Written by Deso. Cash prior to main frame dump:cool: * :oCan I purchase the oem operating system from you unix people? :cool: ...

LEARN ABOUT CENTOS

my

MY(4)							   BSD Kernel Interfaces Manual 						     MY(4)

NAME

     my -- Myson Technology Ethernet PCI driver

SYNOPSIS

     To compile this driver into the kernel, place the following line in your kernel configuration file:

	   device my

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   if_my_load="YES"

DESCRIPTION

     The my driver provides support for various NICs based on the Myson chipset.  The Myson chipset is a variant of the DEC Tulip NIC chipset.

     The driver will work with almost any MII-compliant PHY, thus failure to positively identify the chip is not a fatal error.

HARDWARE

     The my driver provides support for various NICs based on the Myson chipset.  Supported models include:

     o	 Myson MTD800 PCI Fast Ethernet chip
     o	 Myson MTD803 PCI Fast Ethernet chip
     o	 Myson MTD89X PCI Gigabit Ethernet chip

SEE ALSO

     altq(4), de(4), netintro(4), pci(4), ifconfig(8)

HISTORY

     The my driver first appeared in FreeBSD 4.6.

AUTHORS

     The my driver was written by Myson Technology Inc.

     This manual page was written by Hiten M. Pandya <hmp@FreeBSD.org>.

BUGS

     The my driver does not support Power Management Events (PME).

BSD
								  March 11, 2007							       BSD

AIX