NIM for multiple network

10 More Discussions You Might Find Interesting

1. AIX

How to know NIM name from NIM client?

Friend's, I was playing around with NIM in my environment & had a quick question in mind which I didn't/couldn't find answer to, which is -- how to find the name of the NIM server sitting on the NIM client? All leads to the answer would be much appreciated, many thanks! -- Souvik

2. AIX

Problem in communication nim client with nim master

Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client...

3. AIX

NIM master with multiple client subnets

Hi Guys, I'm building a new NIM environment with clients on 3 different subnets. I want to get some advise on what is the best approach for this kind of setup. This is the sample network for my new NIM. Master IP: 10.20.1.20 Client IP subnet_1: 10.20.1.21 Client IP subnet_1: 10.30.1.21...

4. AIX

NIM : remove nim client info from the client

Hi. I change my client's IP and hostname but I forgot to change anything on the master. How can I redefine or modify my client's resource from my master, or with using smit niminit from my client ? Tks

5. UNIX for Advanced & Expert Users

Multiple interface same network

hi I have a question, eth0 : 192.168.2.10 eth1: 192.168. 2.11 subnet : 255.255.255.0 eth0 and eth1 plug same swich I want communication between the two interface one host examp : ping 192.168.2.10 -I eth1 ping 192.168.2.11 -I eth0 but not respons.. pls helme

6. AIX

Changing subnet mask for a NIM Network.

I am new to this forum so please bare with me. I did search for this answer prior to posting but no luck. Running an AIX NIM Master at 5.3TL9SP4, with about 100 clients. The subnet of one of the networks defined in the NIM env has changed. When I go to Manage Networks, Change/Show...

7. AIX

Back up a client NIM from nim master

Hello everyone Im trying to backup a nim client from nim master but I got this message COMMAND STATUS Command: failed stdout: yes stderr: no Before command completion, additional instructions may appear below. 0042-001 nim:...

8. AIX

NIM w/ two network interfaces

Hi all, this is my first post on this forum. My main problem is this: I have a NIM server that I am trying to configure two interfaces on. One interface is for an internal Admin VLAN, the other is so that the server can use SUMA to pull updates. The problem is that I need help w/ the routing....

9. AIX

NIM w/ two network interfaces

10. AIX

migrate NIM server through NIM installation

I try to migrate a NIM server from one server to another. I try to do a mksysb on NIM server restore the NIM server's mksysb to a client through NIM installation shutdown NIM server start newly installed client as NIM server Does anyone do this before? who can give me some suggestion?

LEARN ABOUT OPENSOLARIS

auscope

AUSCOPE(1)						      General Commands Manual							AUSCOPE(1)

NAME

       auscope - Network Audio System Protocol Filter

SYNOPSIS

       auscope [ option ] ...

DESCRIPTION

       auscope	is  an	audio  protocol  filter  that can be used to view the network packets being sent between an audio application and an audio
       server.

       auscope is written in Perl, so you must have Perl installed on your machine in order to run  auscope.   If  your  Perl  executable  is  not
       installed  as  /usr/local/bin/perl,  you should modify the first line of the auscope script to reflect the Perl executable's location.  Or,
       you can invoke auscope as

       perl auscope [ option ] ...

       assuming the Perl executable is in your path.

       To operate, auscope must know the port on which it should listen for audio clients, the name of the desktop  machine  on  which	the  audio
       server  is running and the port to use to connect to the audio server.  Both the output port (server) and input port (client) are automati-
       cally biased by 8000.  The output port defaults to 0 and the input port defaults to 1.

ARGUMENTS

       -i<input-port>
	       Specify the port that auscope will use to take requests from clients.

       -o<output-port>
	       Determines the port that auscope will use to connect to the audio server.

       -h<audio server name>
	       Determines the desktop machine name that auscope will use to find the audio server.

       -v<print-level>
	       Determines the level of printing which auscope will provide.  The print-level can be 0 or 1.  The larger  numbers  provide  greater
	       output detail.

EXAMPLES

       In  the	following  example,  mcxterm is the name of the desktop machine running the audio server, which is connected to the TCP/IP network
       host tcphost.  auscope uses the desktop machine with the -h command line option, will listen for client requests on port 8001  and  connect
       to the audio server on port 8000.

       Ports  (file  descriptors)  on the network host are used to read and write the audio protocol.  The audio client auplay will connect to the
       audio server via the TCP/IP network host tcphost and port 8001:

	      auscope -i1 -o0 -hmcxterm

	      auplay -audio tcp/tcphost:8001 dial.snd

       In the following example, the auscope verbosity is increased to 1, and the audio client autool will connect to the  audio  server  via  the
       network host tcphost, while displaying its graphical interface on another server labmcx:

	      auscope -i1 -o0 -hmcxterm -v1

	      autool -audio tcp/tcphost:8001 -display labmcx:0.0

SEE ALSO

       nas(1), perl(1)

COPYRIGHT

       Copyright 1994 Network Computing Devices, Inc.

AUTHOR

       Greg Renda, Network Computing Devices, Inc.

								       1.9.3								AUSCOPE(1)

AIX