Default route removed - what to do ?

9 More Discussions You Might Find Interesting

1. Red Hat

IP Route add default and make permanet

Hi all, actually i'm facing this problem, we have 2 NICs on our VM.s with REDHAT 7.2 release, we made the following set up as we needed to access them from both IP ip route flush all ip route add 10.130.11.0/24 dev eno2 tab 1 ip route add 10.130.10.0/24 dev eno1 tab 2 ip route add...

2. Solaris

Default route in system

Hi All Recently we have faced issue in SUN server after reboot of node 2 default routs has been added to system as below IRE Table: IPv4 **Destination*************Mask***********Gateway**********Device Mxfrg Rtt***Ref Flg**Out**In/Fwd* -------------------- ---------------...

3. Solaris

Default route ( netstat -nrv ) is removed/missing after platform patch

After running a script for Platform Patch, the default route is removed from netstat -nrv. The machine does not reboot after Platform Patch. The script does not have any command to remove default route as shown below... route del default gw <IP> I am wondering, how is the defaut route...

4. AIX

Default Route add fails

AIX version 5.3 when I try to add default gateway # route add 0 192.168.100.254 Or # route add default 192.168.100.254 I get the error 0821-275 route: socket: The file access permissions do not allow the specified action. searching on google i came across similar...

5. IP Networking

DHCP/pxeboot Situation: how to specify default route?

Greetings, I am using debian squeeze to perform the following operation: 1. pxeboot Alix 2.c board into debian installer When I get to the installer my laptop's dhcp server successfully provides an ip address but does not set up the default route. I am not sure how to provide this. I...

6. Solaris

Default route is configured, but seem to not work

Hiya, I got the default gateway set in /etc/defaultrouter file, however "netstat -nr" doesn't show anything like "default" in the routing table. As far as I know "netstat" on Solaris 10 u7 should show something like : Routing Table: IPv4 Destination Gateway Flags Ref ...

7. AIX

Default route question

Hello I have a question regarding default route on AIX servers. (I am using a p5 5.3 TL9 machine). in my output of "lsattr -El inet0" I can see there are two routes like below. route net,-hopcount,0,,0,x.x.207.7 Route True route net,-hopcount,0,,0,x.x.202.129 Route True But...

8. Solaris

solaris 10 u5 what happens if no default route configured

Hi, I am new to solaris 10. What is the procedure the os takes if a default route is not configured? I am using a multihomed server with 4 interfaces. It looked strange to me this morning, because i had not defined a default route it defaulted to making one up, with the ip address of another...

9. AIX

Permanent Default Route

Hi, We are running AIX 5.2. Our default gateway used to be IP Address A. Our new default gateway is IP Address B. A netstat revealed that our default route was IP address A. We manually added default route with IP address B and removed the default route with IP address A. However,...

LEARN ABOUT OSF1

routes

routes(4)						     Kernel Interfaces Manual							 routes(4)

NAME

       routes - Specifies Internet routing information to the routing tables

SYNOPSIS

       /etc/routes

DESCRIPTION

       Static  routes  can  be defined in the /etc/routes file.  The /etc/routes file identifies static routes that are automatically added to the
       network routing tables with the /usr/sbin/route add command.  The /sbin/init.d/route script contains the /usr/sbin/route add  command  that
       is executed for each entry in the /etc/routes file when the network is restarted on the system or the system is rebooted.

       The general format of an entry in the /etc/routes file is: Dest Name1 Name2

       The  following is a brief description of each element in an /etc/routes file entry: A keyword that indicates whether the route is to a net-
       work or to a host. The two possible keywords are -net and -host.  The name or address of the destination network or  host.   Name1  can	be
       either  a  symbolic  name (as used in the /etc/hosts or /etc/networks file) or an Internet address specified in dotted-decimal format.  The
       name or address of the gateway host to which messages should be forwarded.  Name2 can be either a symbolic name (as used in the	/etc/hosts
       file) or an Internet address specified in dotted-decimal format.

       The  routes file is a Context-Dependent Symbolic Link (CDSL) and must be maintained as such.  See the System Administration manual for more
       information.

EXAMPLES

       To specify a route to a network through a gateway host with an entry in the /etc/routes file, enter:

       -net net2 host4

	      This example specifies a route to a network, net2, through the gateway host4.  To specify a route to a host through a  gateway  host
	      with an entry in the /etc/routes file, enter:

	      -host host2 host4

	      This  example  specifies	a route to a host, host2, through the gateway host4.  To specify a route to a default gateway host with an
	      entry in the /etc/routes file, enter:

	      default 130.9.0.5

	      This example specifies a route to a default gateway with an Internet address of 130.9.0.5.

FILES

       Contains the /usr/sbin/routed add command.

RELATED INFORMATION

       Commands: route(8)

       Daemons: gated(8), routed(8)

       Files: gated.conf(4)

       Network Administration delim off

																	 routes(4)

AIX