SDD SDDPCM MPIO lspath Jargon

10 More Discussions You Might Find Interesting

1. AIX

Need Help with SDD / SDDPCM / MPIO

This is getting very confusing for me, and appreciate if someone can help. Platform: Power VM ( Virtual I/O Server) ioslevel 2.1.3.10-FP23 # oslevel -s 6100-05-00-0000 Storage: IBM DS4300 Two HBAs - Dual Port Fibre Adapter Channels Each card has two ports , so a total of 4 ports going...

2. AIX

lspath output interpretation

On my VIo I see the following for my disks: $ lspath | grep hdisk6 Enabled hdisk6 fscsi0 200600a0b82193f7,4000000000000 Enabled hdisk6 fscsi0 200700a0b82193f7,4000000000000 Enabled hdisk6 fscsi2 200600a0b82193f8,4000000000000 Failed hdisk6 fscsi2 200700a0b82193f8,4000000000000 $ lspath |...

3. AIX

hdisk status in sdd volume groups

hi all we recently upgraded our san switches. after that, i found i got many hdisks showing in lsdev with status "Defined" and "Available". the number of "Defined" is equal to "Available". the time stamp shows all "Available" disks created at our downtime night. "datapath query device"...

4. AIX

sddpcm on vio

I have same lun (hdisk3) assigned to 2 vios server (dual vio server) and this is mapped to the client lpar. I have sddpcm on the VIO. On the VIOA, the attributes for fscsi1 and fscsi3 are set to fast_fail and dyntrk is set to yes Now, if I do a lqueryvg -Atp on the hdisk3, I get a "DISK...

5. AIX

Upgrading from native MPIO to SDDPCM AIX 6.1

We have AIX 6.1 system attached to SAN disks (DS4700 and DS8100) thru SVC. Initially when the system was I forgot to install sddpcm drivers. and wanted to know how can i go with the installation of the sddpcm drivers. My understandin going thru the manual ...

6. AIX

AIX SDD

I have sdd driver installed correctly but when I run the command: datapath query adapter No device file found what does it mean.. it is not using vpath or whats wrong?

7. AIX

AIX with SDD to VIOed SDDPCM?

Hi folks. We want to move a "physical" AIX box to a VIOed LPAR. The physical box is running SDD with disks from a DS8300. I want to be able to reattach those LUNs from the DS8300 to my VIO server which is running SDDPCM and then assigned them back to my AIX LPAR. Any thoughts about this? I...

8. Red Hat

IBM SDD driver

I was wondering if there is a way of auto-detecting a new vpath, using IBM's SDD driver, on a Linux platform. ON AIX it is a simple as running cfgmgr. Alan

9. Filesystems, Disks and Memory

SDD for SVC on HP-UX and LINUX

Hello Unix Admins: Has any one in this distribution list implemented SVC (SAN Volume Contoller - A solution from IBM) in your environment? If you have, do you have any do's / don'ts? Anything which you like sharing would be really appreciated. For example, my inputs: I tried implementing...

10. Solaris

IBM SDD on Sun

I just installed IBMsddsun64_........... on my sun server. I untarred it (tar xvf) & I tried to install the paxkage. When I did pkgadd -d ./IBMsdd..... I get a message Error, no packages were found. Any idea Thanks,

LEARN ABOUT FREEBSD

ctld

CTLD(8) 						    BSD System Manager's Manual 						   CTLD(8)

NAME

     ctld -- CAM Target Layer / iSCSI target daemon

SYNOPSIS

     ctld [-d] [-f config-file]

DESCRIPTION

     The ctld daemon is responsible for managing the CAM Target Layer configuration, accepting incoming iSCSI connections, performing authentica-
     tion and passing connections to the kernel part of the native iSCSI target.

     Upon startup, the ctld daemon parses the configuration file and exits, if it encounters any errors.  Then it compares the configuration with
     the kernel list of LUNs managed by previously running ctld instances, removes LUNs no longer existing in the configuration file, and creates
     new LUNs as necessary.  After that it listens for the incoming iSCSI connections, performs authentication, and, if successful, passes the
     connections to the kernel part of CTL iSCSI target, which handles it from that point.

     When it receives a SIGHUP signal, the ctld reloads its configuration and applies the changes to the kernel.  Changes are applied in a way
     that avoids unnecessary disruptions; for example removing one LUN does not affect other LUNs.

     When exiting gracefully, the ctld daemon removes LUNs it managed and forcibly disconnects all the clients.  Otherwise - for example, when
     killed with SIGKILL - LUNs stay configured and clients remain connected.

     To perform administrative actions that apply to already connected sessions, such as forcing termination, use ctladm(8).

     The following options are available:

     -f config-file
		 Specifies the name of the configuration file.	The default is /etc/ctl.conf.

     -d 	 Debug mode.  The server sends verbose debug output to standard error, and does not put itself in the background.  The server will
		 also not fork and will exit after processing one connection.  This option is only intended for debugging the target.

FILES

     /etc/ctl.conf	The configuration file for ctld.  The file format and configuration options are described in ctl.conf(5).
     /var/run/ctld.pid	The default location of the ctld PID file.

EXIT STATUS

     The ctld utility exits 0 on success, and >0 if an error occurs.

SEE ALSO

     ctl(4), ctl.conf(5), ctladm(8)

HISTORY

     The ctld command appeared in FreeBSD 10.0.

AUTHORS

     The ctld was developed by Edward Tomasz Napierala <trasz@FreeBSD.org> under sponsorship from the FreeBSD Foundation.

BSD
								 November 9, 2014							       BSD

AIX