02-22-2006
how to change IP of my SUN solaris machine
Hello,
I want to change the IP of my SUN solaris machine but i am not bale to find the right way. I tried the following steps:
1) edit /etc/inet/hosts and change IP address for host listed in
/etc/hostname.le0
2) ifconfig le0 down
3) ifconfig le0 inet NEW_IP_ADDR netmask + broadcast +
4) ifconfig le0 up
5) netstat -rn (get name or ip_addr of "default" router)
6) ping ROUTER_IP_ADDR
7) if ping fails:
route add default ROUTER_IP_ADDR NEW_IP_ADDR 1
On the 3rd point i m getting error as bad address .
Pls help .
Thanks
Aparna
10 More Discussions You Might Find Interesting
1. Solaris
I've installed sun solaris 9 and i need to know how can i enable TCP Keepalive to ping socket connections every 300 seconds?
Thanks,
Mohammed Amin (1 Reply)
Discussion started by: m_amin
1 Replies
2. Solaris
Hi,
I need help from SOLARIS expert. Can someone please tell me how to change the IP address on SUN Solaris?
I have two NMS-SUN machines (Ultra 10) running on Solaris ver. 8 to manage our network with the following IP addresses and SM:
cwmws1: 10.10.100.2 255.255.255.0
cwmws2:... (3 Replies)
Discussion started by: gkr
3 Replies
3. UNIX for Dummies Questions & Answers
Hey there,
I am starting a Computer Science Foundation year at the end of this month and am trying to get a little bit ahead of the game. I have always wanted to learn Unix and am currently struggling with creating a boot disc to run Solaris (I have chosen to study this) from as opposed to... (0 Replies)
Discussion started by: Jupiter
0 Replies
4. Solaris
hi,
I have some windows client machines which require a signal to be sent by a Solaris machine( SunOS 5.6) when ever a particular event occurs on that Solaris machine. What are possible communication mechanisms by which i can do this.
the constraints are
> the windows machines have to... (7 Replies)
Discussion started by: Krsh
7 Replies
5. Solaris
I am new to Sun.
I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor?
Thanks. (3 Replies)
Discussion started by: bramptonmt
3 Replies
6. Solaris
Hi everyone,
Normally it always easier in Sparc machine, i can set or manually use the boot-device in NVram to boot the mirrored disk. However I have a big trouble about x86 mirror for a long time. I have been doing anything i can: search document, google, ask the others.
Recently i did as... (5 Replies)
Discussion started by: tien86
5 Replies
7. IP Networking
This is probably really basic compared to what you guys are usually talking about here, but I have a problem and I have no idea what to do about it. I try to RSH to my Ubuntu computer from my Solaris one and run into a dead end:
>> rsh 192.168.1.103
::ffff:192.168.1.103: Connection timed out... (4 Replies)
Discussion started by: Bradj47
4 Replies
8. Solaris
Is it possible to install 2 flavors of Unix on a single machine ?
-HP Unix
-SUN Solaris
Please provide sufficient information to carry both of the above OS installation on single machine.Any guide/steps/document will do. (3 Replies)
Discussion started by: mahix
3 Replies
9. Solaris
My one Sun machine is not able to ssh another machine of Sun. Although I have configured the ssh successfully
( SunOS sunbox2 5.9 Generic_118558-34 sun4u sparc SUNW,Sun-Blade-2500 )
ERROR
bash-2.05# ssh sunbox2
/etc/ssh/ssh_config: line 34: Bad configuration option: PermitRootLogin... (0 Replies)
Discussion started by: z_haseeb
0 Replies
10. Solaris
Trying to set or modify the randomly set hostID of a Solaris 10 virtual/guest machine that I installed on a Windows-XP host machine (using Virtual Box 4.1.12).
I was able to set/modify the hostname of the Solaris 10 virtual/guest machine during installation as well as via the Virtual Box... (4 Replies)
Discussion started by: Matt_VB
4 Replies
LEARN ABOUT DEBIAN
atalkd
ATALKD(8) Netatalk 2.2 ATALKD(8)
NAME
atalkd - AppleTalk RTMP, NBP, ZIP, and AEP manager
SYNOPSIS
atalkd [-f configfile] [-1] [-2]
DESCRIPTION
atalkd is responsible for all user level AppleTalk network management. This includes routing, name registration and lookup, zone lookup,
and the AppleTalk Echo Protocol (similar to ping(8)). atalkd is typically started at boot time, out of /etc/rc. It first reads from its
configuration file, /etc/netatalk/atalkd.conf. If there is no configuration file, atalkd will attempt to configure all available interfaces
and will create a configuration file. The file consists of a series of interfaces, one per line. Lines with `#' in the first column are
ignored, as are blank lines. The syntax is
interface [ -seed ] [ -phase number ] [ -net net-range ] [ -addr address ] [ -zone zonename ] ...
Note that all fields except the interface are optional. The loopback interface is configured automatically. If -seed is specified, all
other fields must be present. Also, atalkd will exit during bootstrapping, if a router disagrees with its seed information. If -seed is not
given, all other information may be overriden during auto-configuration. If no -phase option is given, the default phase as given on the
command line is used (the default is 2). If -addr is given and -net is not, a net-range of one is assumed.
The first -zone directive for each interface is the ``default'' zone. Under Phase 1, there is only one zone. Under Phase 2, all routers on
the network are configured with the default zone and must agree. atalkd maps ``*'' to the default zone of the first interface. Note: The
default zone for a machine is determined by the configuration of the local routers; to appear in a non-default zone, each service, e.g.
afpd, must individually specify the desired zone. See also nbp_name(3).
ROUTING
If you are connecting a netatalk router to an existing AppleTalk internet, you should first contact your local network administrators to
obtain appropriate network addresses.
atalkd can provide routing between interfaces by configuring multiple interfaces. Each interface must be assigned a unique net-range
between 1 and 65279 (0 and 65535 are illegal, and addresses between 65280 and 65534 are reserved for startup). It is best to choose the
smallest useful net-range, i.e. if you have three machines on an Ethernet, don't chose a net-range of 1000-2000. Each net-range may have an
arbitrary list of zones associated with it.
EXAMPLES
Below is an example configuration file for a sun4/40. The machine has two interfaces, ``le0'' and ``le1''. The ``le0'' interface is
configured automatically from other routers on the network. The machine is the only router for the ``le1'' interface.
le0
le1 -seed -net 9461-9471 -zone netatalk -zone Argus
atalkd automatically acts as a router if there is more than one interface.
FILES
/etc/netatalk/atalkd.conf configuration file
BUGS
On some systems, atalkd can not be restarted.
SEE ALSO
atalkd.conf(5)
Netatalk 2.2 06 Sep 2004 ATALKD(8)