Sponsored Content
Full Discussion: Routing
Special Forums IP Networking Routing Post 9740 by LivinFree on Friday 2nd of November 2001 02:04:10 AM
Old 11-02-2001
I think you may be wanting virtual IP addresses, right?
Same machine / network card, multiple IP addresses...
 

10 More Discussions You Might Find Interesting

1. IP Networking

Routing

I have SCO Unix. I have 2 routers. as it is now, when someone telnets to UNIX and goes through router #1 everything is fine. The users who go through router #2 can not connect at all. I talked to CISCO and they said I need to set up a second Gateway on UNIX. They said what is happening is that... (1 Reply)
Discussion started by: john fli
1 Replies

2. UNIX for Dummies Questions & Answers

routing

Can anyone help with the following; I am working on a unix server (Apple OS X Server). We have two network cards in the server. Both cards are on different subnets i.e en1 is on 192.168.10.10/24 and the built in ethernet is on 10.10.150.10/24. From a computer plugged into en1 (and set to ip... (5 Replies)
Discussion started by: mrthrt
5 Replies

3. UNIX for Advanced & Expert Users

routing

Hi, in which file and how shuold be decalred a gateway and its IP adresse ? Where and how add a gateway ? Many thanks before. (4 Replies)
Discussion started by: big123456
4 Replies

4. Linux

Routing

Hello Friends I have two network cards eth0 192.168.100.1 eth1 10.0.0.1 There NIC connect with diff. LAN I want to make my Linux machine as a Router, Please tell me using IPTABLES command ROUTE command :) (2 Replies)
Discussion started by: jaibw
2 Replies

5. IP Networking

IP Routing

I am using RedHat Linux 9, In this box their are two lan intefaces. eth0 ====> LAN 192.168.100.100 255.255.255.0 eth1 ====> Internet Static IP 255.255.255.0 59.144.168.226 (Gateway) I want to define a gateway 59.144.168.226 for my LAN... (2 Replies)
Discussion started by: jaibw
2 Replies

6. UNIX for Dummies Questions & Answers

Routing tables

Hey guys, I needed to add a route to my routing table and I got it to work but on reboot it gets removed. Anyone know what file I can add this route to so it stays on the machine after a reboot? (9 Replies)
Discussion started by: kingdbag
9 Replies

7. IP Networking

Routing table

Hi all, I am confusing with routing table, i use linux and iptables. i have 1 internet gateway, and 1 router for VPN. here is my network. eth0=192.168.0.1 eth1=192.168.100.1 192.168.0.0/24 --- eth0(Linux Box)eth1 ---(DSL)---Internet | ... (4 Replies)
Discussion started by: blesets
4 Replies

8. IP Networking

Proper routing

I have a series of new machines that are internet facing (have IP's that are accessible via the 'net) and it has internal facing interfaces. I need to be able to communicate back to the internal network to a specific server which processes monitoring and e-mail traffic. I've been told that I should... (3 Replies)
Discussion started by: BOFH
3 Replies

9. UNIX for Dummies Questions & Answers

AIX 5.3 Routing

Hey all you *Nix Gurus...I got a relatively simple one for ya. I just cloned an AIX 5.3 server without copy over the Network info. However, now I need to update the routing table on the destination server so that it mirrors the source. Aside from painstakingly, manually updating the ODM using... (1 Reply)
Discussion started by: BlitzSonik
1 Replies

10. UNIX for Dummies Questions & Answers

about realloc routing

#include <malloc.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> int* allocat_array(void) { int *array; int tmp; int n_values = 0 ; array = malloc(sizeof(int)); if(array == NULL) return NULL; while(scanf("%d",&tmp) != EOF) { ... (1 Reply)
Discussion started by: vincent__tse
1 Replies
gfx_mode_select(3alleg4)					  Allegro manual					  gfx_mode_select(3alleg4)

NAME
gfx_mode_select - Displays the Allegro graphics mode selection dialog. SYNOPSIS
#include <allegro.h> int gfx_mode_select(int *card, int *w, int *h); DESCRIPTION
Displays the Allegro graphics mode selection dialog, which allows the user to select a screen mode and graphics card. The initial values at the addresses provided by card, w, and h are used as the default selections in the dialog if they are found in the driver and mode lists. If they are not found then the initial selections will be the first in each list. If you wish to ensure that the initial selection is always the first entry, then initialize the data at the addresses passed to the function to the value of 0 or -1. If the dialog is OK'd, it stores the selections at the addresses passed to the function. RETURN VALUE
See the gfx_mode_select_filter function for the return values. SEE ALSO
gfx_mode_select_ex(3alleg4), gfx_mode_select_filter(3alleg4), set_gfx_mode(3alleg4), gui_fg_color(3alleg4) Allegro version 4.4.2 gfx_mode_select(3alleg4)
All times are GMT -4. The time now is 08:19 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy