01-26-2006
I dont see anything strange in that output:
Quote:
iostat -En
c0t6d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1711 Revision: 1005 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0
c1t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1RPX4
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST373307FSUN72G Revision: 0307 Serial No: 0334B1S42R
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
Also, my root mirror is complaining. It's posted in the original post. Anyhow, how can I be sure that 1) its a disk failure 2) which disk I need to replace.
10 More Discussions You Might Find Interesting
1. Solaris
hi all,
can someone pls pass on your suggestion?
Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'.... (3 Replies)
Discussion started by: srirammad007
3 Replies
2. Solaris
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
Discussion started by: nickychung
10 Replies
3. Filesystems, Disks and Memory
I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result:
d6 is dying with iostat -nE returns Harderror 3, Transports error 9
Can some offer me some help? Thank you very much. (6 Replies)
Discussion started by: nickychung
6 Replies
4. Solaris
Hi people,
I have on problem when execute the command METASTAT...
d60: Soft Partition
Device: d10
State: Errored
Size: 12582912 blocks (6.0 GB)
Someone help me?
Thank you very much (4 Replies)
Discussion started by: denisgomes
4 Replies
5. Solaris
Hi All,
Sorry to post a problem for my first post but I'm in a bit of a pickle at the minute!
I have an Ultra45 connected to a Storedge 3100 series, 2 internal, 2 external disks with a db application running on the external disks.
Now everything is working fine and we've had no downtime or... (4 Replies)
Discussion started by: TheSteed
4 Replies
6. Solaris
Hi friends,
I'm newbie to SVM.
Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :(
the steps i've taken is as below:-
1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
2.metadb -a -c 3 -f c1t0d0s7... (3 Replies)
Discussion started by: kronenose
3 Replies
7. Solaris
Greetings
How can i restore metastat db after a solaris upgrade (9 to 10)?
will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file?
root@netad# metastat
d35: Mirror
Submirror 0: d38
State: Okay
Submirror 1: d39
State: Okay
Pass:... (2 Replies)
Discussion started by: kashif_islam
2 Replies
8. Shell Programming and Scripting
Hi,
after issuing metastat command I am getting output as follows
Actually these soft partitions are more than 100.
I want output as Device Name & Size.
for eg d4004 2.0 GB (4 Replies)
Discussion started by: tuxian
4 Replies
9. Solaris
Dear,
Required an script such that :
If metastat |grep Needs , results in some output then this command to be executed for the same :
opcmsg object=metastat a=OS msg_grp=OpC severity=critical msg_text="Need maintenance for the system $line"
With regards,
Mjoshi (3 Replies)
Discussion started by: mjoshi87
3 Replies
10. Solaris
Hi,
We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level... (6 Replies)
Discussion started by: prvnrk
6 Replies
LEARN ABOUT CENTOS
lldptool-med
lldptool(8) Linux lldptool(8)
NAME
LLDP-MED - Show / manipulate MED TLV configurations
SYNOPSIS
lldptool -t -i ethx -V [ TLV_TYPE ] enableTx
lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no }
lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 }
lldptool -t -i ethx -V LLDP-MED devtype
TLV_TYPE : = {LLDP-MED | medCap | medPolicy | medLoc | medPower | medHwRev | medFwRev | medSwRev | medSerNum | medManuf | medModel | medAssetID }
DESCRIPTION
The LLDP-MED extensions support the Link Layer Discovery Protocol for Media Endpoint Devices defined in the ANSI/TIA-1057-2006 document.
Each TLV can be configured as a class1 , class2 or class3 device. Class I devices are the most basic class of Endpoint Device, Class II
devices support media stream capabilities and Class III devices directly support end users of the IP communication system. See ANS-TIA-1057
for clarification of class types.
ARGUMENTS
enableTx
Enables the TLV to be transmitted
devtype
Set or query the class type of the device.
TLV_TYPE
List of supported TLV specifiers applicable to Media Endpoint Devices.
LLDP-MED
apply arguments to all supported MED TLVs.
medCAP LLDP-MED Capabilities TLV
medPolicy
LLDP-MED Network Policy TLV
medLoc LLDP-MED Location TLV
medPower
LLDP-MED Extended Power-via-MDI TLV
medHwRev
LLDP-MED Hardware Revision TLV
medFwRev
LLDP-MED Firmware Revision TLV
medSwRev
LLDP-MED Software Revision TLV
medSerNum
LLDP-MED Serial Number TLV
medManuf
LLDP-MED Manufacturer Name TL
medModel
LLDP-MED Model Name TLV
medAssetID
LLDP-MED Asset ID TLV
EXAMPLE & USAGE
Enable class1 MED device on eth2
lldptool -T -i eth2 -V LLDP-MED enableTx=yes devtype=class1
Query class type of MED on eth2
lldptool -t -i eth2 -V LLDP-MED -c devtype
Query transmit state of medPolicy on device eth2
lldptool -t -i eth2 -V medPolicy -c enableTx
SOURCE
o Link Layer Discovery Protocol for Media Endpoint Devices (http://www.tiaonline.org/standards/technology/voip/documents/ANSI-
TIA-1057_final_for_publication.pdf)
NOTES
SEE ALSO
lldptool(8), lldpad(8)
AUTHOR
John Fastabend
open-lldp June 2011 lldptool(8)