I read that posting , i don't know what to add in .profile as I am new to scripting... Can you please tell me what to add in .profile in order to avoid that message.
Thanks
nandinisagar
That particular post is pretty clear on what you need to do but here is a starting point.
You will want to look for instances where you are executing commands like this in your .profile or .kshrc:
Code:
stty -o vi or stty erase ^H
and add a test like this:
Code:
if [[ $- = *i* ]]
then
stty -o vi
stty erase ^H
fi
If you're new to scripting and you still struggle with this example then you're going to need to post your .profile and .kshrc as mahendramahendr requested for further help.
/dev/rmt/0: No such device or address
I get this when I do a "mt -f /dev/rmt/0 rewind"
This is on a Solaris 7 system.
I tried
devfsadm -c tape
and
drvconfig ; tape
and both didn't work.
Help please....... :confused: (4 Replies)
I'm trying to install FreeBSD 7.0 from CDs I made a few months ago on a brand new system with parts I just got in from NewEgg. I select the default option from the Boot Loader and it goes into the device probe. Several devices are recognized, but then it freezes at:
mskc0: <Marvell Yukon... (2 Replies)
Hello,
i am using Solaris 10, The sar running in my system might be corrupted, but not sure why as there has been no updates to it ( to the best of my knowledge) and it was working fine until few days back. If i try to get sar reports using sar -o <filename> 60 180
there is no error but the... (2 Replies)
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
I need to add a printer with Ethernet to my local network. The default IP address in the printer is 0.0.0.0 and I need to change it to a 192.168.0.x address. I have previously temporarily changed the IP address of a computer (with ifconfig) to an address similar to the new device and changed the... (8 Replies)
hi,
i am trying to execute a script through Cron, then everytime it is redirecting a message
stty: : No such device or address
Unmatched `
here is the cron entry:
35,40,45,50,55 04,05 07 08 * /uv1402/u207/home/bravodba/bestdbscript/shscriptfiles/bravo_main_refresh.sh
while the script... (20 Replies)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
LEARN ABOUT DEBIAN
vm
VM(1) mgetty VM(1)NAME
vm - VoiceModem is the program for handling the voice modem functionality from shell scripts
ACTIONS
beep options [<frequency [<length in 0.001sec>]]>
diagnostics options device name (e.g. ttyS2
dial options phone number
help
play options [<file names]+>
record options file name
shell options [<shell script [shell options]]>
wait options [<time in seconds]>
devicetest
OPTIONS -c n use compression type n
-d n set i/o device
-t, -m, -i, -e, -s, -H equals to -d <2,3,4,5,6,7>
-l s set device string (e.g. -l ttyS2:ttyC0)
-v verbose output
-w use off / on hook signal from local handset to start and stop recording
-x n set debug level
-L n set maximum recording length in sec
-P print first DTMF tone on stdout and exit
-R read and print DTMF string on stdout and exit
-S s set default shell for shell scripts (e.g. -S /bin/sh)
-T n set silence timeout in 0.1sec
-V n set silence threshold to <n> (0-100%%)
SEE ALSO vgetty(1)POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 30:
You forgot a '=back' before '=head1'
Around line 32:
'=item' outside of any '=over'
Around line 71:
You forgot a '=back' before '=head1'
perl v5.10.1 2010-04-04 VM(1)