01-24-2006
/dev/rdsk/c1t4d0s7 is wrong. You need to use:
/dev/dsk/c1t4d0s7 when you mount.
10 More Discussions You Might Find Interesting
1. Linux
I'm trying to help convert my boss over to Linux. He has an HP/Compaq PC on which he installed Fedora Core 4 on. It's got a Linksys wireless card in it and we're using the NDIS wrapper to load the Windows driver for the chipset on that card. 'iwconfig' sees the card. We can configure the card. ... (1 Reply)
Discussion started by: deckard
1 Replies
2. UNIX for Advanced & Expert Users
Hi ...
I am facing a strange problem regarding device file for my tape device. Normally it is /dev/rmt/0m . Presently it is showing /dev/rmt/1m . I have tried rmsf -a /dev/rmt/1m , all device file deleted in the directory , then to recreate the device files . It never created any new device files.... (1 Reply)
Discussion started by: sameer017
1 Replies
3. Linux
We are intending to protect a set of user specified files using LVM mirroring where the protected space on which the user files are stored is mirrored on an LV on a different disk. Our problem is that for a user with a custom layout has installed linux with 2 partitons for swap and / and there is... (0 Replies)
Discussion started by: kickdgrass
0 Replies
4. Programming
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Discussion started by: noppon_s
7 Replies
5. Red Hat
Hi friends,
I wanna know how to block USB devices in my RedHat flavor Operating system.
regards,
Prakash (3 Replies)
Discussion started by: prakashkumar41
3 Replies
6. Shell Programming and Scripting
I talked with this guy who seems to think loop mounting a fs ext3 image on a directory, as opposed to just using the underlying filesystem, will work better as far as IO conflicts. I have no idea why this would be better? I haven't been able to contact him.
Basically we have a daemon that... (0 Replies)
Discussion started by: stevenswj
0 Replies
7. Linux
I use CentOS
I talked with this guy who seems to think loop mounting a fs ext3 image on a directory, as opposed to just using the underlying filesystem, will work better as far as IO conflicts. I have no idea why this would be better? I haven't been able to contact him.
Basically we have a... (1 Reply)
Discussion started by: stevenswj
1 Replies
8. Hardware
Hi,
I am trying to measure the speed of reading a given block size using the dd command. However depending on which input I use: a regular file (on the same device) or /dev/sdb1, I get some really different results.
$sudo sh -c 'echo 3 > /proc/sys/vm/drop_caches'; dd if=pirate of=/dev/null... (9 Replies)
Discussion started by: nytty
9 Replies
9. Debian
I need to add a printer with Ethernet to my local network. The default IP address in the printer is 0.0.0.0 and I need to change it to a 192.168.0.x address. I have previously temporarily changed the IP address of a computer (with ifconfig) to an address similar to the new device and changed the... (8 Replies)
Discussion started by: snorkack59
8 Replies
10. Solaris
I build up two node cluster (node1, node2) in virtualbox. For these two nodes I add 5 shared disk. (Also each node have own OS disk).
1 shared disk for vtoc
2 shared disk for NFS resource group
2 shared disk for WEB resource group
When I finished my work; two nodes was ok and shared disk... (4 Replies)
Discussion started by: sonofsunra
4 Replies
LEARN ABOUT MOJAVE
mkdevmaps
mkdevmaps(1M) System Administration Commands mkdevmaps(1M)
NAME
mkdevmaps - make device_maps entries
SYNOPSIS
/usr/sbin/mkdevmaps
DESCRIPTION
The mkdevmaps command writes to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
media devices.
The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevmaps command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO
allocate(1), bsmconv(1M), attributes(5)
NOTES
mkdevmaps might not be supported in a future release of the Solaris operating system.
SunOS 5.10 8 Oct 2003 mkdevmaps(1M)