01-05-2006
If both of those partitions are on one physical disk drive, yes. You just have to be careful that you don't remove/move space from another partition. You would use the format command, pick the appropriate disk drive, pick the partiton option, print option (to see what you have now on that disk), then see if the two partitions are next to each other (or are the only ones there). Slice 2 is always left alone and not used.
Note - you will mess up your system if you don't know what you are doing!!!
Post the output of the following
df -kl
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
2. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
3. UNIX for Dummies Questions & Answers
Sorry if this is totally the wrong place to post this but I have a question or something rather thats bugging me. I got a new Dell Inspiron laptop the other day and I was expecting it to have 80G on it, well atleast 70 or so after installation of OS and such but after looking carefully yesterday, I... (8 Replies)
Discussion started by: Ecclesiastes
8 Replies
4. UNIX for Advanced & Expert Users
Hi,
I have a solaris 9-sparc box, which after bouncing is giving swap space related error messages(that swap space is not enough). could it be possible that there was some command issued or setting made before bouncing, which was lost after bouncing? please let me know how i can add swap space... (1 Reply)
Discussion started by: 0ktalmagik
1 Replies
5. Shell Programming and Scripting
I'm new to Linux and have very limited experience with shell scripts in general. I am taking a class and I have to research online and come up with a shell script that monitors disk space. I also have to be able to explain it line by line. I've researched various sites and came across this shell... (3 Replies)
Discussion started by: wgreg23
3 Replies
6. Linux
have a VMWARE machine, I have extended it from 20GB to 30GB for Linux box.
The linux box shows this for df -hal:
Filesystem Size Used Avail Use% Mounted on
-dev-mapper-VolGroup00-LogVol00
19G 5.9G 12G 34% -
proc 0 0 0 - -proc
sysfs 0 0 0 - -sys
devpts 0 0 0 - -dev-pts
-dev-sda1 99M 13M... (1 Reply)
Discussion started by: mackman
1 Replies
7. Solaris
Hi,
Im currently having my diskspace allocation of my UFS filesystem in solris as 100% for /usr
directory.I have created a zfs pool of 3 gb.I want to allocate space from my zfs pool to /usr so that i can free space in /usr.Please help me it is quiet urgent. (6 Replies)
Discussion started by: navjotmannan
6 Replies
8. UNIX for Dummies Questions & Answers
I have installed samba by cmd yup install samba -a
and configured my samba server.But i want my samba users to lo-gin from windows users and contain allocated amount of space.
plz help me............ (1 Reply)
Discussion started by: yashwanthguru
1 Replies
9. Fedora
Hi,
I run Fedora 17.
I created a physical volume of 30GB on a disk with 60GB of space so there is 30GB of free space. On the physical volume, I created my volume group and logical volumes. I assigned all the space in the physical volume to my volume group. I need to add the 30GB of free space... (1 Reply)
Discussion started by: mojoman
1 Replies
10. UNIX for Dummies Questions & Answers
Good Morning everyone,
I want to know how to allocate unallocated drive space from a SAN to a file system that desperately needs the drive space. Does anyone have any documentation or tips on how to accomplish this? I am running on AIX version 6.1. (2 Replies)
Discussion started by: ryanco
2 Replies
SD(4) Linux Programmer's Manual SD(4)
NAME
sd - driver for SCSI disk drives
SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */
#include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */
CONFIGURATION
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti-
tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive.
SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num-
ber is the number of the physical drive in order of detection, and partition_number is as follows:
+3 partition 0 is the whole drive
partitions 1-4 are the DOS "primary" partitions
partitions 5-8 are the DOS "extended" (or "logical") partitions
For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have
major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system.
At this time, only block devices are provided. Raw devices have not yet been implemented.
DESCRIPTION
The following ioctls are provided:
HDIO_GETGEO
Returns the BIOS disk parameters in the following structure:
struct hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
unsigned long start;
};
A pointer to this structure is passed as the ioctl(2) parameter.
The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical
geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of
fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters.
BLKGETSIZE
Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long.
BLKRRPART
Forces a reread of the SCSI disk partition tables. No parameter is needed.
The SCSI ioctl(2) operations are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl(2) fails with
the error EINVAL.
FILES
/dev/sd[a-h]
the whole device
/dev/sd[a-h][0-8]
individual block partitions
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the
latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Linux 2017-09-15 SD(4)