NTPD seems to be not syncing !!! Post: 94775

Sponsored Content

Operating Systems Linux NTPD seems to be not syncing !!! Post 94775 by csaha on Tuesday 3rd of January 2006 11:55:07 PM

01-04-2006

Registered User

Hi Friend

Quote:

I did not find the first site on the lists. The second site is a stratum 1. I would just use the second entry. If you use multiple servers, you need at least 3. Two servers does not work very well.

which site are you talking about ? I am able so get response from all the websites/links/ip adresses given here.

See below ===

Quote:

C:\Documents and Settings\csaha>ping billthecat.sdsc.edu

Pinging billthecat.sdsc.edu [132.249.20.60] with 32 bytes of data:

Reply from 132.249.20.60: bytes=32 time=315ms TTL=232
Reply from 132.249.20.60: bytes=32 time=306ms TTL=232
Reply from 132.249.20.60: bytes=32 time=332ms TTL=232
Reply from 132.249.20.60: bytes=32 time=319ms TTL=232

Ping statistics for 132.249.20.60:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 306ms, Maximum = 332ms, Average = 318ms

C:\Documents and Settings\csaha>ping clock.isc.org

Pinging clock.isc.org [204.152.184.72] with 32 bytes of data:

Reply from 204.152.184.72: bytes=32 time=312ms TTL=42
Reply from 204.152.184.72: bytes=32 time=304ms TTL=42
Reply from 204.152.184.72: bytes=32 time=304ms TTL=42
Reply from 204.152.184.72: bytes=32 time=301ms TTL=42

Ping statistics for 204.152.184.72:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 301ms, Maximum = 312ms, Average = 305ms

csaha

View Public Profile for csaha

Find all posts by csaha

5 More Discussions You Might Find Interesting

1. HP-UX

Ntpd

Hello, I'm looking for assitance on setting up network time protocol on my HP-ux boxes. I have edit the .conf file accordingly. And /etc/services. But whenever I try and start the service nothing happens at all. No error message, nothing. I have a SCO box as a time server and I wish...

2. AIX

ntpd version

How to check the ntpd version of AIX 5.3 ?

3. Shell Programming and Scripting

Modifying the ntpd deamon script

I need to replace the line daemon ntpd $OPTIONS in the following script with daemon ntpd $OPTIONS 2>&1 > /var/log/ntpd.log & what will happen? The idea of replacing is to capture the output on the console into ntpd.log file. Will this work? ...

4. Red Hat

ntpd -gq not working

as advised and documented, i'm trying to use the ntpd -gq instead of ntpdate. The result is that clock not set. as below. However ntpdate is working ok and had set the clock correctly this is the ntp.conf file: # cat /etc/ntp.conf logfile /var/log/ntp.log driftfile /var/lib/ntp/drift...

5. Debian

Ntpd slow start

on every boot, ntpd takes long time to start (after moving from dhcp to static ip). is there a way to speed it up?

LEARN ABOUT DEBIAN

mrtg-ping-probe

MRTG-PING-PROBE(1)					      General Commands Manual						MRTG-PING-PROBE(1)

NAME

       mrtg-ping-probe - ping probe module for Multi Router Traffic Grapher

DESCRIPTION

       mrtg-ping-probe is a ping probe module for MRTG 2.x.  It is used to monitor the round trip time and packet loss to networked devices.  MRTG
       uses the output of mrtg-ping-probe to generate graphs visualizing minimum and maximum round trip times or packet loss.

       mrtg-ping-probe is not run directly, but is called by MRTG as a helper when it needs to determine ping time to a host.

       Act responsibly: do not use mrtg-ping-probe to ping devices without the owner's permission.  Just imagine if 10,000 people decided to  ping
       your hosts!  mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.

OPTIONS

       To  use	mrtg-ping-probe you need to configure MRTG to call it from within the definition of a target host. This is done in the MRTG config
       file, which is usually /etc/mrtg.conf.

       Here's an example snippet: change the target name and IP address to suit your needs.

       Target[your.target.ping]: `/usr/bin/mrtg-ping-probe 123.456.789.123`
       SetEnv[your.target.ping]: MRTG_INT_IP="123.456.789.123" MRTG_INT_DESCR="ping"
       MaxBytes[your.target.ping]: 100
       AbsMax[your.target.ping]: 200
       Options[your.target.ping]: gauge, growright
       YLegend[your.target.ping]: ping time (ms)
       ShortLegend[your.target.ping]: ms
       Legend1[your.target.ping]: Maximum Round Trip Time in ms
       Legend2[your.target.ping]: Minimum Round Trip Time in ms
       Legend3[your.target.ping]: Maximal 5 Minute Maximum Round Trip Time in ms
       Legend4[your.target.ping]: Maximal 5 Minute Minimum Round Trip Time in ms
       LegendI[your.target.ping]: &nbsp;Max:
       LegendO[your.target.ping]: &nbsp;Min:

       Pay close attention to the backticks in the first line which tell MRTG to execute the nominated external program. Note also that  you  need
       to use the "gauge" option, since the results of subsequent ping probes are independant values and not an incrementing counter.

SEE ALSO

       mrtg(1).

       The latest release of mrtg-ping-probe can be found on the web at http://pwo.de/projects/mrtg/

AUTHOR

       This manual page was written by Jonathan Oxer <jon@debian.org>, for the Debian project (but may be used by others).

								  April 14, 2003						MRTG-PING-PROBE(1)