12-27-2005
HI,
U can get all the infor using a tool called MSTM or CSTM
i would prefer to use cstm (u should have root privilises for the same),
#cstm
cstm> map all
cstm> sel all
save this to a file and u can see all the info..
for the device drivers look at ioscan output.
for more info man ioscan
Regards
govind.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello, i have to activate a network interface. for HPUX1100 i can command ifconfig lanx plumb.
Why doesent it works under HPUX10.20?
How can i realise it?
thanks for your help!:) (2 Replies)
Discussion started by: ortsvorsteher
2 Replies
2. HP-UX
Hi guys,
Need a favour or information on how to get it done in configuring a HPUX-11i box?I need the commands which is needed to configure the box...The pdf's in HP site is too much to look at.Is there any advice from u guys on how could i settle this problem? (7 Replies)
Discussion started by: giriplug
7 Replies
3. AIX
Hi All,
Needed commands to find Monitor , chassis & keyboard related information on AIX.
Please please please help.
Thanks
VK (2 Replies)
Discussion started by: Veenak15
2 Replies
4. HP-UX
Hi All
Please somebody send me list of admin commands used for HPUX.
Thanks
Sunanda (2 Replies)
Discussion started by: sunanda
2 Replies
5. Solaris
Hi all
Got another strange one. If I try to enquire about the hardware, the command hangs implying Ive got a hardware issue. So, if I execute :-
iostat -en
sysdef - ( stops at the devices part )
format
cfgadm -al
Anything that searches the devices, then the command hangs.
... (4 Replies)
Discussion started by: sbk1972
4 Replies
6. HP-UX
I am new for HPUX OS and want to pursue my career in HPUX Administration.
I could not able to get following information from HP.com site, that why I need an assistance to know that - can I install HPUX 11i V3 OS on old HP B2000 & B1000 workstations (these workstation are 4 to 5 year old) or not,... (5 Replies)
Discussion started by: girish.batra
5 Replies
7. Solaris
Hi guru
I want to know which company's hardware is more stable means in term of H/W faults or replacement, in case of IBM (AIX), HP (HPUX) & SUN MICROSYSTEM (Solaris) & which order also, if we go through more stable to less stable system.
Regards (1 Reply)
Discussion started by: girish.batra
1 Replies
8. Hardware
Are there any other useful hardware commands to get information about your hardware? Is there any information that can't be found with these commands?
cat /proc/cpuinfo
cat /proc/meminfo
dmesg
lspci
sudo dmidecode
cpuid | more
lspci -v | grep VGA
sudo lspci -v -s 00:02.0
sudo lspci -vvv... (12 Replies)
Discussion started by: cokedude
12 Replies
9. HP-UX
We would like to know a HP Utility or any Unix command that can give the exact status of PCI Gigabit Ethernet cable (lan cable) We had tried to execute
lanscan
ioscan -fnC lan
The status appears to be the same when the cable is plugged & unplugged and also when the lan is disabled &... (5 Replies)
Discussion started by: siva3492
5 Replies
10. HP-UX
I own a 1999 vintage HP Logic Analyzer that runs HPUX 10.20. It is a 9000/775/rock system similar to a Visualize C132L/160L system.
I'm attempting, mostly for the fun of it, to upgrade the existing slow 5MB/s-only SCSI system, with a new-er PCI card. Of course drivers is my major concern. I'd... (2 Replies)
Discussion started by: KeithM
2 Replies
LEARN ABOUT DEBIAN
vpddecode
VPDDECODE(8) System Manager's Manual VPDDECODE(8)
NAME
vpddecode - VPD structure decoder
SYNOPSIS
vpddecode [OPTIONS]
DESCRIPTION
vpddecode prints the "vital product data" information that can be found in almost all IBM and Lenovo computers. Available items are:
o BIOS Build ID
o Box Serial Number
o Motherboard Serial Number
o Machine Type/Model
Some systems have these additional items:
o BIOS Release Date
o Default Flash Image File Name
Note that these additional items are not documented by IBM, so this is guess work, and as such should not be blindly trusted. Feedback
about the accuracy of these labels is welcome.
OPTIONS
-d, --dev-mem FILE
Read memory from device FILE (default: /dev/mem)
-s, --string KEYWORD
Only display the value of the VPD string identified by KEYWORD. KEYWORD must be a keyword from the following list: bios-build-id,
box-serial-number, motherboard-serial-number, machine-type-model, bios-release-date. Each keyword corresponds to an offset and a
length within the VPD record. Not all strings may be defined on all VPD-enabled systems. If KEYWORD is not provided or not valid,
a list of all valid keywords is printed and vpddecode exits with an error. This option cannot be used more than once. Mutually
exclusive with --dump.
-u, --dump
Do not decode the VPD records, dump their contents as hexadecimal instead. Note that this is still a text output, no binary data
will be thrown upon you. ASCII equivalent is displayed when possible. This option is mainly useful for debugging. Mutually exclu-
sive with --string.
-h, --help
Display usage information and exit
-V, --version
Display the version and exit
FILES
/dev/mem
AUTHOR
Jean Delvare
SEE ALSO
biosdecode(8), dmidecode(8), mem(4), ownership(8)
dmidecode February 2007 VPDDECODE(8)