Cisco Router command to get hostname Post: 93547

7 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Perl telnet to cisco router and compare the ping ms

All Please help, i will telnet to router to obain the ping status and compare, if higher than normal latency, i will have further action.. if i do the telent and in perl script then .... e.g the result i obtain from the router will be =' Success rate is 100 percent (5/5), round-trip...

2. IP Networking

Linux behind a cisco router

Dear All, I have worked with xDSL routers working in bridged mode, and linux behind them working as a Firewall utilizing IPTABLES. My question is, how this will change if the xDSL router is replaced with a Cisco Router? I mean to ask that, can I assign a public ip on the linux machine, which...

3. IP Networking

Setup Dial In VPN on Cisco Router

Hello, Does anyone know where I can find configuration information on setting up a dial in VPN on Cicso IOS for a bunch of servers. Could not seem to find anything in search engines. Thanks

4. IP Networking

isc dhcpd and cisco router

Hello all, I have set up dhcpd on a linux box for serving subnets on multiple vlans configured on a Cisco 6500 with ip helper of the dhcp server. Servers get dhcp leases just fine, however, some machines lose their connection for reboot or what not and I can not get their lease back even though...

5. IP Networking

How to show Cisco Router Running Configuration in Third Party Application

Hey everyone, I have a few question. 1. Is it possible to display cisco 'show run' output command to the application ?? 2. And is there any ways to log in to the router instead of using telnet from telnet application??? Thanks in advance

6. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that...

7. IP Networking

Need help configuring Cisco 892-k9 router

I bought a Cisco 892-k9 router and I am having in issue trying to setup the initial configuration. Does someone have a sampl configuration for a single subnet that I can use for my configuration? Thanks.

LEARN ABOUT V7

defaultrouter

defaultrouter(4)                                                   File Formats                                                   defaultrouter(4)

NAME

       defaultrouter - configuration file for default router(s)

SYNOPSIS

       /etc/defaultrouter

DESCRIPTION

       The /etc/defaultrouter file specifies a IPv4 host's default router(s).

       The format of the file is as follows:

       IP_address
       ...

       The  /etc/defaultrouter  file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If
       you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at  the  time  that
       defaultrouter is read.

       Lines beginning with the ``#'' character are treated as comments.

       The  default  routes  listed  in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will
       cause the default route added by the kernel to be deleted.

       Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an  IPv4  router.
       You can use routeadm(1M) to override this behavior.

FILES

       /etc/defaultrouter              Configuration file containing the hostnames or IP addresses of one or more default routers.

SEE ALSO

       in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4)

SunOS 5.10                                                          17 Aug 2004                                                   defaultrouter(4)