network? Post: 9342

8 More Discussions You Might Find Interesting

1. Programming

Help in developing a Network Appliation to monitor pc in a network

I am developing a Network Appliation to monitor computers in a network. Specs are App monitors the current web page viewed in each system App also can shutdown the computer in the network App can show all process run by each computer in the network I am now confused how to start my...

2. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

3. UNIX for Advanced & Expert Users

Network Shell Script & Blade Logic & Network Security

I am going to take up a position in Data & Network Security. I would need to write network shell scripts doing the following task: Going to around 2000 servers and findout which groups has access to each servers and which ids are there in each group that has access. I need to implement...

4. Solaris

configure zones to have different network interface and network

i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ? Thanks

5. UNIX and Linux Applications

Access to network interface (Mac-network)

Hi, I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan. For that I must access to network interface to develope my personal stack based on standard 802.15.4. Can you help me? I need an explanation for that.

6. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

7. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

8. IP Networking

I would like to monitor network traffic for a computer on my network

My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I...

LEARN ABOUT DEBIAN

vlan-interfaces

VLAN-INTERFACES(5)						   File formats 						VLAN-INTERFACES(5)

NAME

       /etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format

DESCRIPTION

       /etc/network/interfaces	contains  network  interface  configuration  information  for  the  ifup(8)  and ifdown(8) commands.  This manpage
       describes the vlan extensions to the standard interfaces(5) file format.

       Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which  are  gener-
       ally needed when using (a lot of) vlans.

VLAN CREATION

       Vlan  interface	definitions  exist  of the vlan interface name, and an optional 'raw-device' parameter.  Vlan interfaces are numbered 1 to
       4095.  You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero.  The  following
       example shows four ways to create a vlan with id 1 on interface eth0.  They all result in different names.

	iface eth0.1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan1 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface eth0.0001 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan0001 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# We don't have br support out of the box
	iface br0.2 inet static
	    vlan-raw-device br0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# Aliases are ignored
	iface br0.2:1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.255

EXTRA IFACE OPTIONS

       Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.

       vlan-raw-device devicename
	      Indicates the device to create the vlan on.  This is ignored when the devicename is part of the vlan interface name.

       ip-proxy-arp 0|1
	      Turn proxy-arp off or on for this specific interface.  This also works on plain ethernet like devices.

       ip-rp-filter 0|1|2
	      Set the return path filter for this specific interface.  This also works on plain ethernet like devices.

       hw-mac-address mac-address
	      This sets the mac address of the interface before bringing it up.  This works on any device that allows setting the hardware address
	      with the ip command.

AUTHOR

       This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>

SEE ALSO

       vconfig(8) interfaces(5)

vlan								 September 30 2007						VLAN-INTERFACES(5)