Sponsored Content
Operating Systems Linux Debian HDD not detected by RHL 9 (or 7.2) Post 93301 by Abhishek Ghose on Saturday 17th of December 2005 08:49:48 PM
Old 12-17-2005
Help needed for a Sadistic SATA

Hi,

Well I tried with Fedora Core 4, because someone told me that it has boot time support for SATA drives. It hasnt, and I get the same problem as before--the installation simply stops in the middle. Now regarding having the kernel recompiled on another machine, since I dont have access to another machine with Linux on it (at least not ready/easy access),I was thinking whether this approach would work (and if it does, can somebody explain how): I installed VMWare(virtual OS software) on my XP OS giving it the target drive as another partition. I could install RHL 9, without a single hitch on VMWare. Can I recompile the kernel here, write it down on a CD somewhere, and try reinstalling Linux (RHL 9)? Or, better still, RHL 9, during boot time, asks for the relevant HDD driver if it doesnt find any, so perhaps I could copy the respective driver from the VMWare's implementation of the virtual RHL 9, and use it during the installation. Which of these approaches would work (if any would), and can someone detail out how.

Nobody told me SATA would be such a PAIN!!!!
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Dual booted RHL 7.3 with Win XP..

Hello all, I'm a no Linux expert! But I perfectly dual booted Win XP with RHL 7.3 on a hp pavilion notebook (model ze5170). All working fantastic now. But I have a minor problem now. I can't get RHL probe the modem, so could not get the internet connection working. The modem is a Conexant... (1 Reply)
Discussion started by: Vishnu
1 Replies

2. UNIX for Dummies Questions & Answers

External Modem for RHL 7.3...

Another stupid question... and I can only hope someone can spend a little time answering it... So thats it. I went thru the documentation out there at linmodems.org, trie this and that... read thru this post https://www.unix.com/showthread.php?s=&threadid=1787 on my favorite forums. And... (3 Replies)
Discussion started by: Vishnu
3 Replies

3. UNIX for Dummies Questions & Answers

Old HDD copy to new HDD ? im lost...

Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4. The current HDD is an IBM DGHS COMP IEC -950 FRU PN#... (5 Replies)
Discussion started by: Chevy89rocks
5 Replies

4. Solaris

OS is not detected CPU and memory

Hi, Server AIBVRFCC failed POST while booting on 06/28/2009. Server is up, but OS cannot see two CPUs (CPU 0 and CPU 2) and half of the installed system memory (8 GB is physically installed but only 4 GB is seen by OS now). bld00016:root psrinfo 1 on-line since 06/28/09 05:51:36 3 on-line... (1 Reply)
Discussion started by: arumsun
1 Replies

5. Programming

stack smashing detected

Like you can see in the title this is my problem! Here is what appears in the terminal :confused::confused::confused: *** stack smashing detected ***: ./a.out terminated ======= Backtrace: ========= /lib/tls/i686/cmov/libc.so.6(__fortify_fail+0x48)... (2 Replies)
Discussion started by: italian_boy
2 Replies

6. Hardware

iPhone Not being detected

I'm New to the linux world I'm running OpenSuse and as soon as I installed everything was wokring like a charm. and i said to myself I'm so keeping this OpSys! everytime i would plug in my iPhone it would read it as anything else as a filesystem and i was able to go through the device files an etc,... (9 Replies)
Discussion started by: JuankyKong
9 Replies

7. Linux

Local NTP on RHL

Hi I have an offline system, no access to the internet. It has a number of windows vms as well as some physical Red hat linux servers. I would like to one of the linux servers as a NTP server, so its local time is used as the reference point for all the other vms. How do I do this. Most of the... (1 Reply)
Discussion started by: kelseyh1
1 Replies

8. Solaris

No memory detected in Bank 3

Hi. Recently I discovered how to access the 'ok' prompt on my E450. (Thanks DukeNuke2) And so I've been running tests, checking the system out... (since until now I've not known how to get to the 'ok' prompt) And came across 0>INFO: No memory detected in Bank 3 and *** Missing DIMM(s)... as... (3 Replies)
Discussion started by: SomeoneTwo
3 Replies

9. UNIX for Dummies Questions & Answers

Help needed - RHL

Hi, have been given a dell server with redhat linux installed , in my new company on my desk , have not worked much on linux. Was also given a static IP. I dont have a console, but a monitor, that I switch between my desktop and this server. yesterday I wanted to change IP of the server... (4 Replies)
Discussion started by: abhi123
4 Replies

10. AIX

IBM AIX Internal HDD vs SAN HDD and Oracle

Hi Folks, I am facing an issue with the performance. P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
Discussion started by: filosophizer
7 Replies
HPTIOP(4)						   BSD Kernel Interfaces Manual 						 HPTIOP(4)

NAME
hptiop -- HighPoint RocketRAID 3xxx/4xxx device driver SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file: device hptiop device scbus device da Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): hptiop_load="YES" DESCRIPTION
The hptiop driver provides support for the HighPoint RocketRAID 3xxx/4xxx series of SAS and SATA RAID controllers. HARDWARE
The hptiop driver supports the following SAS and SATA RAID controllers: o HighPoint RocketRAID 4522 o HighPoint RocketRAID 4521 o HighPoint RocketRAID 4520 o HighPoint RocketRAID 4322 o HighPoint RocketRAID 4321 o HighPoint RocketRAID 4320 o HighPoint RocketRAID 4311 o HighPoint RocketRAID 4310 o HighPoint RocketRAID 3640 o HighPoint RocketRAID 3622 o HighPoint RocketRAID 3620 The hptiop driver also supports the following SAS and SATA RAID controllers that are already End-of-Life: o HighPoint RocketRAID 4211 o HighPoint RocketRAID 4210 o HighPoint RocketRAID 3560 o HighPoint RocketRAID 3540 o HighPoint RocketRAID 3530 o HighPoint RocketRAID 3522 o HighPoint RocketRAID 3521 o HighPoint RocketRAID 3520 o HighPoint RocketRAID 3511 o HighPoint RocketRAID 3510 o HighPoint RocketRAID 3410 o HighPoint RocketRAID 3320 o HighPoint RocketRAID 3220 o HighPoint RocketRAID 3122 o HighPoint RocketRAID 3120 o HighPoint RocketRAID 3020 NOTES
The hptiop driver has only been tested on the i386 and amd64 platforms. SEE ALSO
cam(4), hptmv(4) HISTORY
The hptiop device driver first appeared in FreeBSD 7.0. AUTHORS
The hptiop driver was written by HighPoint Technologies, Inc. BSD
July 5, 2013 BSD
All times are GMT -4. The time now is 09:28 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy