Sponsored Content
Special Forums IP Networking configure TCP/IP for solaris 8 Post 9253 by doeboy on Wednesday 24th of October 2001 04:32:51 PM
Old 10-24-2001
As long as the OS is installed, just create an entry for the machine with it's IP address in /etc/hosts. If it exists, make sure it's right.

Create a file called /etc/hostname.hme0 (or whatever network interface is on your machine) with the hostname in it.

Set up a /etc/defaultrouter file with the ip address of your router.

Reboot.

Should be it. There could be other things you might need to do, depending on how your network setup is, but this should get you going.
 

10 More Discussions You Might Find Interesting

1. IP Networking

How do I configure TCP/IP

How do I configure TCP/IP on an old SCO UNIX 3.2 v4.0 I can't seem to find any type of documentation on it. Can someone give me step by step info or refer some type of article? (11 Replies)
Discussion started by: gguzman
11 Replies

2. IP Networking

Solaris 8 on Intel TCP/IP

I have just installed solaris 8 for Intel on one of my machines at home and I have a cable modem connection with a static IP and I am using a linksys cable/dsl router to assign IP's to my machines. I was wondering if any of you guys know the specific files and examples of the files I have to... (2 Replies)
Discussion started by: reggie316
2 Replies

3. UNIX for Dummies Questions & Answers

How to configure Full Duplex and TCP/IP

We are using ZIX 4.3.3 and we need to configure the NIC for ful duplexing and we also need to configure it for a TCP/IP default gateway and DNS server to acccess the Interent. Can you please tell me the commands and procedures for configuring this? Thanks Marc (2 Replies)
Discussion started by: marc3483
2 Replies

4. Solaris

How can i Configure TCP Keepalive on sun solaris 9 machine?

I've installed sun solaris 9 and i need to know how can i enable TCP Keepalive to ping socket connections every 300 seconds? Thanks, Mohammed Amin (1 Reply)
Discussion started by: m_amin
1 Replies

5. Solaris

[help] very need help for solaris TCP

hi expert, hi all very need help please advice, i have v890 production server (gateway server) which running on telecommunication application (e.g USSD application) on this few month i have a problem with the connection to application server, for 2 - 3 hours the connection always down and cannot... (0 Replies)
Discussion started by: bucci
0 Replies

6. Solaris

Locked TCP port in Solaris 10

Hi all I haven't had much experience with Solaris 10 but we've started running into a problem where a process hangs, it is killed and leaves a zombie process. The sysadmins are saying this zombie process is locking a tcp port and not allowing the process to start up. The process is a usually... (5 Replies)
Discussion started by: casphar
5 Replies

7. Solaris

logging solaris 10 tcp-wrappers

I want to log tcp-wrapper events Solaris 10. I researched and saw that I could make a syslog entry in the hosts.deny, which I did below. After restarting syslog and having ssh blocking, I see nothing logging. I also do not get the email that should be generated. The file was taken from a... (2 Replies)
Discussion started by: csgonan
2 Replies

8. Solaris

TCP splicing for Solaris 10

Hi, How can I do tcp splicing in Solaris 10 ? Is there any software for this in solaris 10? Like in Linux there is "tcpsp-0.0.5.tar.gz" from following link: TCPSP Software - an open source TCP splicing implmentation Thanks n please help NeeleshG (1 Reply)
Discussion started by: neel.gurjar
1 Replies

9. Solaris

TCP listner on Solaris server

Hi, I am having a solaris server. I want to start a dummy TCP listner on UNIX OS on a specific port can anyone please let me know the process. IP ADDRESS: 123.123.123.123 Port: 8010 (1 Reply)
Discussion started by: mayank2211
1 Replies

10. Solaris

Too much TCP retransmitted and TCP duplicate on server Oracle Solaris 10

I have problem with oracle solaris 10 running on oracle sparc T4-2 server. Os information: 5.10 Generic_150400-03 sun4v sparc sun4v Output from tcpstat.d script TCP bytes: out outRetrans in inDup inUnorder 6833763 7300 98884 0... (2 Replies)
Discussion started by: insatiable1610
2 Replies
defaultrouter(4)                                                   File Formats                                                   defaultrouter(4)

NAME
defaultrouter - configuration file for default router(s) SYNOPSIS
/etc/defaultrouter DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s). The format of the file is as follows: IP_address ... The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that defaultrouter is read. Lines beginning with the ``#'' character are treated as comments. The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will cause the default route added by the kernel to be deleted. Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router. You can use routeadm(1M) to override this behavior. FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers. SEE ALSO
in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4) SunOS 5.10 17 Aug 2004 defaultrouter(4)
All times are GMT -4. The time now is 01:18 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy