12-05-2005
You should have no problem putting multiple types of file systems on a tape assuming there's enough room to hold it.
You'll need to "fast forward" past the tar backup (I do this on Solaris so I can't guarentee the commands I'm offering here will help, but maybe the concepts will help you find the proper commands on your OS):
mt -f /dev/rmt/0n fsf 1
On Sun, the 0n device is the first tape but it's the "no rewind device" so mt will forward to the first block past the EOF and not rewind the tape (this is important). You can change the last number if you want to back up a third block of data.
Next use the backup command to back up the data. If you have another file system to back up, you can continue past the vdump backup as long as you use a "no rewind device" for vdump. Otherwise you'll have to jump past two backup blocks:
mt -f /dev/rmt/0n fsf 2
To restore from the second backup on the tape, you use the same mt command to get past the first EOF block to the vdump backup and then restore it.
Hope that helps as I don't know what vdump is. You can also pick up O'Reilly's backup and recovery book. Excellent book.
Carl
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Howdy,
I'm trying to tar some directories to tape and then extract them from tape on another machine. I was hoping someone could help me with the syntax of the tar commands. Both machines are running Solaris 8.
Need to get all files and directories under the following:
... (6 Replies)
Discussion started by: pmetal
6 Replies
2. Filesystems, Disks and Memory
Hi,
The scenario is as follow:
Backup was done using:
tar cvf /dev/rmt/0mn file1.ext
tar cvf /dev/rmt/0mn file2.ext
tar cvf /dev/rmt/0mn file3.ext
tar cvf /dev/rmt/0mn file4.ext
tar cvf /dev/rmt/0mn file5.ext
When I do; tar tvf /dev/rmt/0m,
it only gives me the first file on the... (1 Reply)
Discussion started by: kong
1 Replies
3. UNIX for Advanced & Expert Users
I tried to buckup some oracle archive logs (from a solaris machine) to a remote tape (in a HP-UX machine).
I added the solaris machine name and user to .rhosts, and i tried to use this commande :
tar cvf HPhost:/dev/rmt/0mn /u01/*
The probleme that it gives:
HPhost:/dev/rmt/0mn : No such... (1 Reply)
Discussion started by: lasgaa
1 Replies
4. UNIX for Advanced & Expert Users
When trying to extract a tar file in HP-UX using tar -xvf command it exits with the following error :"Tar: tape blocksize error".
Tar file is created using the following command with MKS toolkit(Unix Simulation Kit for Windows env) under Windows 2000 Professional:
"$tar -cvf test.tar test.txt... (1 Reply)
Discussion started by: ramkumar
1 Replies
5. UNIX for Advanced & Expert Users
Trying to answer a question about whether tar table-of-contents is a good tool for verifying tape data. (1 Reply)
Discussion started by: tjlst15
1 Replies
6. Solaris
hello guys,
am trying to save a file file1 to a remote tape drive using tar and i get a permission denied error as shown below:
server1%tar cvf - file1 | rsh server2 dd of=/dev/rmt/1m conv=sync
a file1 1883905K
permission denied
since server2 requires login username and password, i see in... (3 Replies)
Discussion started by: nom
3 Replies
7. AIX
Hi,
I use tar to backup the following programs:
tar -cvf /dev/rmt0.1 u04/devdb/log/arch
tar -cvf /dev/rmt0.1 u01/app/oracle/product/10.2.0.2/dbs
tar -cvf /dev/rmt0 u01/app/oracle/product/10.2.0.2/network/admin
when I want to retrieve the tape content list with:
tar -tvf /dev/rmt0
it... (1 Reply)
Discussion started by: victorcheung
1 Replies
8. IP Networking
i have a script on a tru64 system that backups data from severral folders on a tape
the command that it uses is this : vdump 0N /usr > /dev/null (for backuping the usr folder).
somehow it has predefined that /dev/null is the tape
the problem is that the tape has broke down so i need an... (0 Replies)
Discussion started by: el97639
0 Replies
9. Shell Programming and Scripting
I've got a KSH/AIX question that I haven't been able to figure out yet.
I've got a tape archive program that "tar's" data to a tape. After creating the archive, I'd like to somehow verify that the tape is actually good. So, what I'd like to do as a simple "sanity" check that I can read the tape... (9 Replies)
Discussion started by: dernsdorff
9 Replies
10. Solaris
Hi,
I am trying to determine if a tape is full because on 2 different tapes, im receiving 2 different kind of errors:
# uname
SunOS
# /bin/tar cvf /dev/rmt/0n /export/home
a /export/home/jerry/wlserver_10.0.tar.gz 28528 tape blocks
tar: write error: unexpected EOF
# mt -f /dev/rmt/0n... (5 Replies)
Discussion started by: mosies
5 Replies
TAR(1) General Commands Manual TAR(1)
NAME
tar - tape archiver
SYNOPSIS
tar [ key ] [ name ... ]
DESCRIPTION
Tar saves and restores files on magtape. Its actions are controlled by the key argument. The key is a string of characters containing at
most one function letter and possibly one or more function modifiers. Other arguments to the command are file or directory names specify-
ing which files are to be dumped or restored. In all cases, appearance of a directory name refers to the files and (recursively) subdirec-
tories of that directory.
The function portion of the key is specified by one of the following letters:
r The named files are written on the end of the tape. The c function implies this.
x The named files are extracted from the tape. If the named file matches a directory whose contents had been written onto the tape,
this directory is (recursively) extracted. The owner, modification time, and mode are restored (if possible). If no file argument
is given, the entire content of the tape is extracted. Note that if multiple entries specifying the same file are on the tape, the
last one overwrites all earlier.
t The names of the specified files are listed each time they occur on the tape. If no file argument is given, all of the names on
the tape are listed.
u The named files are added to the tape if either they are not already there or have been modified since last put on the tape.
c Create a new tape; writing begins on the beginning of the tape instead of after the last file. This command implies r.
The following characters may be used in addition to the letter which selects the function desired.
0,...,7 This modifier selects the drive on which the tape is mounted. The default is 1.
v Normally tar does its work silently. The v (verbose) option causes it to type the name of each file it treats preceded by the
function letter. With the t function, v gives more information about the tape entries than just the name.
w causes tar to print the action to be taken followed by file name, then wait for user confirmation. If a word beginning with `y'
is given, the action is performed. Any other input means don't do it.
f causes tar to use the next argument as the name of the archive instead of /dev/mt?. If the name of the file is `-', tar writes
to standard output or reads from standard input, whichever is appropriate. Thus, tar can be used as the head or tail of a filter
chain Tar can also be used to move hierarchies with the command
cd fromdir; tar cf - . | (cd todir; tar xf -)
b causes tar to use the next argument as the blocking factor for tape records. The default is 1, the maximum is 20. This option
should only be used with raw magnetic tape archives (See f above). The block size is determined automatically when reading tapes
(key letters `x' and `t').
l tells tar to complain if it cannot resolve all of the links to the files dumped. If this is not specified, no error messages are
printed.
m tells tar to not restore the modification times. The mod time will be the time of extraction.
FILES
/dev/mt?
/tmp/tar*
DIAGNOSTICS
Complaints about bad key characters and tape read/write errors.
Complaints if enough memory is not available to hold the link tables.
BUGS
There is no way to ask for the n-th occurrence of a file.
Tape errors are handled ungracefully.
The u option can be slow.
The b option should not be used with archives that are going to be updated. The current magtape driver cannot backspace raw magtape. If
the archive is on a disk file the b option should not be used at all, as updating an archive stored in this manner can destroy it.
The current limit on file name length is 100 characters.
TAR(1)