Sponsored Content
Full Discussion: Performances with RAID 5
Operating Systems Solaris Performances with RAID 5 Post 91735 by aribault on Monday 5th of December 2005 08:10:38 AM
Old 12-05-2005
Performances with RAID 5

Hello every body,
Maybe someone could help me.
I have a SUN Server with 6 disks, each of 150 Gb.
I have mounted the first two disk in mirror (RAID1) for the system files.
I have mounted 3 disks in RAID5 for users file systems.
I kept the last one as spare and I have mounted it standalone (RAID0).
I made a test with a 1Gb file :
the copy from RAID1 to RAID0 is 25 seconds.
the copy from RAID1 to RAID5 is 10 minutes !!
I think that it may be something wrong in the configuration.
Thanks for your help.
Alain
 

9 More Discussions You Might Find Interesting

1. AIX

ssa performances

Helo: We updated form AIX 4.3.3 to AIX 5.1-7 and after this we spent more than double time in read from external disks. Aparently the ssa cards microcode is at last level and all the ptf and apars are instaled. Out backups expent more than double time, but curiously in read only, if we write in... (0 Replies)
Discussion started by: Javier Gutierre
0 Replies

2. Linux

grep -f CPU performances

Hi I would like to thank you all for this excellent forum. Today i tried to compare two files and i get some problem with it. I have two files and i want to get all the data that match the first file like this File1 (pattern file) ___________________________ 9007 9126 9918 9127 ... (6 Replies)
Discussion started by: tafil
6 Replies

3. UNIX for Advanced & Expert Users

File alignment and performances... (difficult)

Hello ! I will use my best english possible to explain my objective. I'm french so pardon for the lack of precision... So, what i would like to do in shell script (but you will possibly answer ''not possible in script'' have to use low level langage or something like that) is described below.... (3 Replies)
Discussion started by: Gnaag
3 Replies

4. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

5. Solaris

implementing RAID 1 from RAID 5

Dear ALl, I have a RAID 5 volume which is as below d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5 d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0 d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4 d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Discussion started by: jegaraman
2 Replies

6. Solaris

Creation of Raid 01 and Raid 10

Hello All, I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps. TIA Curious solarister (1 Reply)
Discussion started by: Solarister
1 Replies

7. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

8. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

9. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
MFI(4)							   BSD Kernel Interfaces Manual 						    MFI(4)

NAME
mfi -- LSI MegaRAID SAS driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device pci device mfi Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): mfi_load="YES" DESCRIPTION
This driver is for LSI's next generation PCI Express SAS RAID controllers. Access to RAID arrays (logical disks) from this driver is pro- vided via /dev/mfid? device nodes. A simple management interface is also provided on a per-controller basis via the /dev/mfi? device node. The mfi name is derived from the phrase "MegaRAID Firmware Interface", which is substantially different than the old "MegaRAID" interface and thus requires a new driver. Older SCSI and SATA MegaRAID cards are supported by amr(4) and will not work with this driver. Two sysctls are provided to tune the mfi driver's behavior when a request is made to remove a mounted volume. By default the driver will disallow any requests to remove a mounted volume. If the sysctl dev.mfi.%d.delete_busy_volumes is set to 1, then the driver will allow mounted volumes to be removed. HARDWARE
The mfi driver supports the following hardware: o LSI MegaRAID SAS 1078 o LSI MegaRAID SAS 8408E o LSI MegaRAID SAS 8480E o LSI MegaRAID SAS 9260 o Dell PERC5 o Dell PERC6 o IBM ServeRAID M5015 SAS/SATA o IBM ServeRAID-MR10i o Intel RAID Controller SROMBSAS18E FILES
/dev/mfid? array/logical disk interface /dev/mfi? management interface DIAGNOSTICS
mfid%d: Unable to delete busy device An attempt was made to remove a mounted volume. SEE ALSO
amr(4), pci(4), mfiutil(8) HISTORY
The mfi driver first appeared in FreeBSD 6.1. AUTHORS
The mfi driver and this manual page were written by Scott Long <scottl@FreeBSD.org>. BUGS
The driver does not support big-endian architectures at this time. BSD
May 12, 2010 BSD
All times are GMT -4. The time now is 04:52 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy