Sponsored Content
Operating Systems Solaris Sun Fire V440 and Patch 109147-39 Post 90709 by BOFH on Saturday 26th of November 2005 12:46:45 AM
Old 11-26-2005
Sun Fire V440 and Patch 109147-39

Got an curious issue.

I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on.

The patch modified mainly the linker libraries and commands.

I'm curious as to why it broke on just the V440s. Since they're all jumpstart installations, they should all have similar configurations.

Side Note and question:

I booted the Solaris 8 CD, broke the mirror, backed off the changed files and copied the ones from the CD to the server.

Worked great on the second box but the first one halted at the Hardware Watchdog Enabled text. No indication as to why. I used the second mirror and brought the system back up.

Because of the full debugging, it took most of the day though (9:30am to 6:40).

Thanks.

Carl
 

10 More Discussions You Might Find Interesting

1. Solaris

Sun Fire v440 keeps shutting down

Hello, I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies

2. Solaris

Sun Fire 280R Sun Solaris CRT/Monitor requirements

I am new to Sun. I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor? Thanks. (3 Replies)
Discussion started by: bramptonmt
3 Replies

3. Solaris

Sun Fire v440 hardware problem (can't get ok>)

First of all it's shut down 60 second after power on and write on console : SC Alert: Correct SCC not replaced - shutting managed system down! This is cured by moving out battery from ALOM card. Now server start to loop during the testing. That's on the console: >@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies

4. Solaris

error messages in Sun Fire V440

Hello, I am seeing error messages in V440 (OS = solaris 8). I have copied here : The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day.. I... (5 Replies)
Discussion started by: upengan78
5 Replies

5. Solaris

ALOM wont work when KVM connected to Sun Fire V440 server

Hi, I was asked to connect a KVM screen to a Sun Fire V440 last night so I connected it up but no joy and nothing on the KVM screen. I was told that a reboot may fix the problem so connected to the ALOM and rebooted. On the plus side, the KVM screen now works but I lost the ALOM connection. ... (0 Replies)
Discussion started by: jimmy54321
0 Replies

6. Solaris

Firmware password Solaris Sun Fire v440

Hi: I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies

7. Solaris

Sun Fire v440 Over heat Problem.

Dear Team, I need some expert advice to my problem. We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies

8. Solaris

Sun-Fire V440 boot disk issue

Hi, I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken. Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies

9. Solaris

Removing a disk from SUN Fire V440 running Solaris 8

Hi, I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either. Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies

10. Solaris

Sun Fire v440 Hard disk or controller broken? WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1)

Hi, I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error: WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1): SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
JIGDO-MIRROR(1) 														   JIGDO-MIRROR(1)

NAME
jigdo-mirror - Maintain a mirror of images offered with jigdo SYNOPSIS
jigdo-mirror [ config-file ] DESCRIPTION
See jigdo-file(1) for an introduction to Jigsaw Download. jigdo-mirror is a script intended for people who want to offer direct HTTP or FTP downloads of files for which only the jigdo and template files are available. As the first step of using jigdo-mirror, you need to set up normal HTTP/FTP/rsync mirroring both of the `.jigdo'/`.template' files and of the parts that are needed for the reconstruction of the images. For example, in the case that you want to mirror Debian CD images with jigdo-mirror, you need a mirror of the `.jigdo'/`.template' files and a Debian mirror on the local machine. At regular intervals (preferably immediately after the normal mirroring has finished), schedule a run of jigdo-mirror. It will search through a given directory for any `.jigdo' files and attempt to create all images offered by each file. The script requires you to set a number of variables - please refer to the start of /usr/bin/jigdo-mirror for a description of each of them. Since /usr/bin/jigdo-mirror will be overwritten whenever you upgrade jigdo-mirror, it is highly recommended not to change the set- tings directly in this script. Instead, personal settings should be saved in a file called .jigdo-mirror in your home directory, or in a different file whose name is then passed to the script as its first (and only) command line argument. SEE ALSO
jigdo-file(1), jigdo-lite(1) CD images for Debian Linux can be downloaded with jigdo <URL:http://www.debian.org/CD/jigdo-cd/>. AUTHOR
Jigsaw Download <URL:http://atterer.net/jigdo/> was written by Richard Atterer <jigdo atterer.net>, to make downloading of CD ROM images for the Debian Linux distribution more convenient. 19 May 2006 JIGDO-MIRROR(1)
All times are GMT -4. The time now is 09:15 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy