To all who have been wondering if this was fixed or not. Here is the skinny.
Code:
Why PASV Poses Problems for FTP Servers on Internal Networks.
The other server-side problem that can occur is when a client is trying to access an FTP server on an internal network protected by a routing device. Because a server response from PASV includes an IP address and port number, if this IP address corresponds to a private network then the client will not be able to connect to that private address. From our PASV example above, we have:
Server: 227 Entering Passive Mode (172,16,3,4,204,173)
If left unaltered, the client would try to connect to port 52397 on the IP address 172.16.3.4. If the client is not on the private internal network, the client would time-out trying to connect to that address, when in reality it should be connecting to the external IP address of the routing device.
Solution 1: The network administrator of the server network can consult the routing device vendor's documentation to see if FTP connections can be dynamically monitored and dynamically replace the IP address specification for packets containing the PASV response.
Using our PASV example above, when the FTP server replies to the PASV request:
Server: 227 Entering Passive Mode (172,16,3,4,204,173)
The routing device should rewrite the packet like this, assuming the external address is 17.254.0.91:
Server: 227 Entering Passive Mode (17,254,0,91,204,173)
The remote client would then attempt to connect to the routing device at 17.254.0.91:52397. The routing device in this example would then forward all traffic for this connection between the remote client and the internal FTP server at IP address 172.16.3.4.
We have decided to pursue this alternative. This information is from the following URL
Hi,
I'm uploading files using internet explorer.
1.Open internet explorer 6.0
2.Open site like ftp://172.45.15.1
3.Copy files
The files which I'm copying are basically zip files. What is the default transfer mode, I mean ASCII/BINARY ???.
The problem I'm facing, while extracting these... (4 Replies)
Hi,
I am relatively new to Unix. What I am trying to create now is a script to ftp some file(s) from Unix server to Windows ( not mine) machine. It should be able to run not in interactive mode, eventually I will schedule it to run at certain time intervals.
So far I have created the... (6 Replies)
Hi,
One bank statement file should be loaded into some tables by using a concurrent program. But if the file is transfered in binary mode i am getting some special characters in the file which is unexpected. so, for that while moving that file data into tables i want to write a script that... (2 Replies)
Hello All,
On solaris 10 server i could see the FTP service is in maintenance mode always :mad:
Could some assist?
svcs -xv
svc:/network/nfs/nlockmgr:default (NFS lock manager)
State: maintenance since Tue 28 Jul 2009 11:47:55 AM BST
Reason: Restarting too quickly.
See: Sun... (5 Replies)
Hi
I am FTPing a file to a remote server from my local server. But after I FTP it the permissions are not in executable option, I need to change the permissions of the FTPed file how can i do that. Below is my script
LOCALDIR=/batch/ediprocess
LOCAL_BACKUP_DIR/batch/ediprocessBackUp... (4 Replies)
how to connect to ftp server in passive mode?
ftp server.abc
and how can i see ftp settings, doesn't exist some ftpd.conf
there is some other file where i check the options and configurations of ftp server?
Thanks (3 Replies)
Hi,
We have one java client which connects to a windows server through ftp in active mode and gets files. When we run this client on hp-ux, it is able to transfer 100k files. But when we run the same client on Linux server it is able to transfer only 200 files at max and it is hanging there... (1 Reply)
HI,
Need to ftp a bunch of files in a directory in batch mode. TRying to ftp a single file first with below code.
#!/bin/ksh
function ftp_files
{
ftp -n ${D2_SRVR} <<-EOF
quote user ${D2_UID}
quote pass ${D2_PWD}
cd ${D2_DIR}/${D2_NAME}
lcd ${D1_DIR}/${D1_NAME}/dml/
put file1
... (6 Replies)
I am using below code to send files into ascii mode.what changes will I have to do to send files into Binary mode ?
ftp -in <<FIN
open $SAP_UP_SERVER
user $SAP_UP_USER $SAP_UP_PASSWORD
asc
put $PM00_OUTPUTS_DIRECTORY/$SAP_UP_FILE_CSV /SAP_UP_FILE_CSV
quit
FIN (1 Reply)
Hi,
I have to transfer my files using FTP. Few files are in Zipped format (.Z) and few are in .PX format . For zipped files, we need to change the mode to binary while transferring the files whereas for the px files the mode should be ascii.
Eg: sample1.z
sample2.z
sample3.z
sample.px ... (2 Replies)
Discussion started by: vidlaks
2 Replies
LEARN ABOUT DEBIAN
gftp
GFTP(1) General Commands Manual GFTP(1)NAME
gftp - file transfer client for *NIX based machines.
SYNOPSIS
gftp [options] [[proto://][ user : [pass] @] server [: port ][/ directory ]]
DESCRIPTION
gFTP is a file transfer client for *NIX based machines. It currently has a text interface and a GTK+ 1.2/2.x graphical interface. It cur-
rently supports the FTP, FTPS (control connection only), HTTP, HTTPS, SSH and FSP protocols.
OPTIONS
You may enter a url on the command line that gFTP will automatically connect to when it starts up.
--help, -h
Display program usage.
--info Display some information about how gFTP was built. Please send the output of this command when submitting a bug report.
--version, -v
Display the current version of gFTP.
proto This specifies the protocol that should be used. It can currently be one of the following options: ftp, ftps, http, https, ssh, fsp,
local and bookmark. If omitted, the protocol specified by the default_protocol option will be used.
user The username that will be used to log into the remote server. If omitted, your current username will be used for most protocols. For
the FTP protocol, the anonymous username will be used.
pass The password that will be used to log into the remote server. If omitted, you will be prompted for the password. If you are using
the FTP protocol, and the username is anonymous, then your email address will be used as the password.
server The remote server to connect to.
port The remote port on the server to connect to. If omitted, the default port for the protocol will be used. The port will be looked up
in the services(5) file.
directory
The directory to change to once you are connected to the remote server.
FILES
~/.gftp/gftprc
Per user configuration file. Most of these options can be edited inside gFTP. This file is also commented very well. ~/.gftp/book-
marks
Per user bookmarks file.
BUGS
If you find any bugs in gFTP, please report them to GNOME's Bugzilla at http://bugzilla.gnome.org/
AUTHOR
Brian Masney <masneyb@gftp.org> - http://www.gftp.org/
MARCH 2007 GFTP(1)