09-29-2005
Actually, it doesn't matter at this point I guess - I'm pretty sure you toasted the metadb info so you only have one course of action. The good news is if you haven't done anything else, you should be able to get your server back without to much trouble. (if someone else would double check my info below to insure we give CYPG good info here.)
boot single user from cdrom
ok boot cdrom -s
Once the server is up in single user, mount the /dev/rdsk/c0t0d0s0 which was /.
# mount /dev/dsk/c0t0d0s0 /a
# cd /a/etc
# cp vfstab vfstab.9999
# vi vfstab
Comment out any lines with /dev/md in them.
Add in the following:
/dev/dsk/c0t0d0s1 - - swap - no -
/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no logging
/dev/dsk/c0t0d0s6 /dev/rdsk/c0t0d0s6 /home ufs 2 yes logging
Save the file with wq
# cp system system.9999
# vi system
Remove any info about Disksuite - remove the lines between
* Begin MDD root info (do not edit)
and
* End MDD root info (do not edit)
Remove the lines between
* Begin MDD database info (do not edit)
and
* End MDD database info (do not edit)
Save the file with wq
#
# cd /
# umount /a
#fsck /dev/rdsk/c0t0d0s0
# eeprom
check that your boot device is equal to c0t0d0s0 - you may have look in format to check it
#sync;sync;halt
ok boot -s
This will set you up to hopefully have a system that boots - now all you need to do is recreate the mirrors again (including the metadb info). You will need to find an empty partition and put/allocate some space for the metadb info.
Suggest you put a comment in the vfstab that shows which partition holds the metadb so others will hopefully see it and not blow it away by mistake.
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have a problem with a submirror of the root filesystem,
in the procedure in order to unmirror the FS say:
metadetach -f d0 d20
metaroot c0t0d0s0
but, in my system the metaroot cause a segmentation fault coredump. I knew that the command modify the /etc/system and
the /etc/vfstab.
I try... (3 Replies)
Discussion started by: hugo_perez
3 Replies
2. Linux
Dear Forum savants,
I have a problem that I am not sure how to overcome. Two years ago I had
a friend build me computer with a linux os (red hat) for learning purposes. It happens to have an oracle server on it as well... Anyway , because of personal reasons, I lost complete interest in... (5 Replies)
Discussion started by: jxh461
5 Replies
3. HP-UX
i forgot my password on a HP-UX 9.xx machine. is there a possible way of changing it without knowing the root passwd?
I would do it with a boot disk and chroot but I dont have a boot disk available....
any ideas?
thanks!!
Paul Tittel (1 Reply)
Discussion started by: paultittel
1 Replies
4. UNIX for Dummies Questions & Answers
Hello,
Is there a way to reset the "root" unix password, pretty much like you would do in linux by going into single user mode? :confused: :confused:
Thank you in advance. (5 Replies)
Discussion started by: Mr Big
5 Replies
5. Red Hat
hi
i have a RHEL 4 and have forgot root passwd
tried to boot in by singel user and then changing the passwd but it's not letting me do that ......throwing some weird error as .......manipulation
i also tried to make a new user from CLI but even though it's not letting me in from that user as... (12 Replies)
Discussion started by: techbravo
12 Replies
6. Solaris
hello friends,
I am currently using solaris 10.
I have lost the root password.
Can you please give me a step by step procedure on how to set the password again. (11 Replies)
Discussion started by: nsharath
11 Replies
7. UNIX for Dummies Questions & Answers
i am a new user of unix .
i lost my SGI unix server root password
Any body please help me,how get password? (2 Replies)
Discussion started by: vasu.k82
2 Replies
8. Red Hat
Dear all,
I am using RHEL5. In that machine i forgot the root passwd. But i can able to login by using my username. But performing administrative tasks it will asks the root login. Can somebody tell me reset the root passwd.
Thanks in advance.
Regards,
Prakashkumar.S (2 Replies)
Discussion started by: prakashkumar41
2 Replies
9. Shell Programming and Scripting
i am using a newprocess, but i forgot the key point
Changed subject. See post below from Neo (2 Replies)
Discussion started by: Maryeveryday
2 Replies
10. UNIX for Beginners Questions & Answers
hi everyone
i have forgot my root password and i have other user to login. can i get the password without restarting the server as that cant be afforded. . it is a Sparc architecture 2U blade server. it is old server mounted and functional since 2009. what should be the modus oprandee. i am novice... (5 Replies)
Discussion started by: janakors
5 Replies
LEARN ABOUT FREEBSD
vfstab
vfstab(4) File Formats vfstab(4)
NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the
default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the
file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file
system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to
indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.
The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a
swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the
swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.
EXAMPLES
The following are vfstab entries for various file system types supported in the Solaris operating environment.
Example 1: NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.
Example 2: pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of remov-
able media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-
at-boot field to no, as below. Such an entry presumes you are not running vold.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.
Example 3: CacheFS Mount
Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to
a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter
values as you would for any vfstab entry, on a single line.
device to mount: svr1:/export/abc
device to fsck: /usr/abc
mount point: /opt/cache
FS type: cachefs
fsck pass: 7
mount at boot: yes
mount options:
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache
See mount_cachefs(1M) for CacheFS-specific mount options.
Example 4: Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(7FS) for an overview of the loopback file system.
SEE ALSO
fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)
System Administration Guide: Basic Administration
SunOS 5.10 21 Jun 2001 vfstab(4)