09-22-2005
If your hard disk is a fresh one without file system been shown to it that is if u are formatting and installing for the first time
then u can use partition magic software.
But it seems that u had already windows xp in ur 80 GB hard disk but want to have Linux additionally.
If u want to additionally install Linux with existing XP
then check out for these
is your 80GB HDD under FAT32 file system
then
format a portion of your HDD and leave the portion as unallocated partition
note if the partition in ur HDD is of NTFS, that partition cannot be split
u need to complete format and have FAT32 as unallocated partition
If u want to install XP and Linux
and if it is a fresh install of ur HDD then
have a portion as unallocated and remaining as windows native partition FAT32 .
there is no need to re-install windows when u r installing linux
unless by mistake if u partition ur primary drive or ur entire partition FS is of type NTFS for existing XP
Start inserting ur Linux CD, and procced to install in the unallocated partition, which can then be selected as Linux native partition of EXT3
There is nothing to cause u headache if u r failing and restarting somewhere but dont forget if your HDD 's bad sectors are increasing u need to have a check on theprocess.
Untill then u can proceed happily.
Please let me know if u have anyother questions, or queries or if u r stuck up some where.
All the best.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I'm looking for a Partitioning Tool preferably with a GUI preferably free that is easy to use if anyone has any suggestions they will be greatfully recieved, Thanks. (4 Replies)
Discussion started by: OSNovice
4 Replies
2. UNIX for Dummies Questions & Answers
I would like to install Redhat 7.2 on my Windows machine. I only have one hard drive and I dont want to lose Windows. Which method is best for partitioning the HD?
I tried it once with Partition Magic and I was installing Corel Linux First Edition and Corel wiped out my entire HD (not good when... (2 Replies)
Discussion started by: primal
2 Replies
3. UNIX for Dummies Questions & Answers
Hello,
Using Solaris 10. Going to mirror disks with solstice disksuite. Documentation says I have to make both disks partitioned exactly the same before moving on.
Here's the layout of c1t0d0
Part Tag Flag Cylinders Size Blocks
0 root wm 1237 - 2473 6.00GB (1237/0/0) 12587712
... (1 Reply)
Discussion started by: pmichner
1 Replies
4. Red Hat
Hey, this question is generated purely out of my lack of knowledge.
Ok, obviously you can partition hard drives, I have Windows 2k, and can partition it from administrative tools, however, all of the help sections have utterly failed to give me any information other than "when you partition, it... (5 Replies)
Discussion started by: Mal_Zapatos
5 Replies
5. Solaris
Total disk size is 38912 cylinders
Cylinder size is 32130 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
... (2 Replies)
Discussion started by: seyiisq
2 Replies
6. Ubuntu
Hi folks,
Ubuntu 10.04-1 64-bit
HD - 1T SATA3
I ran graphic installation installing Ubuntu-10.04-1 desktop from Live CD
The partition on the new HD is as follow;
/root
/home
/kvm
(kvm is for keeping the guests of KVM, the virtualizer)
Installion went through without problem abd... (0 Replies)
Discussion started by: satimis
0 Replies
7. Solaris
I was told that on the bootable drive, slice 02 is reserved for system usage. Is this true?
In our deployment each server is equipped with a hardware RAID adapter. The current plan is to create the slices as follows:
c1t0d0s0 = swap 16386
c1t0d0s1 = /var 15366
c1t0d0s2 = / free
Does this... (4 Replies)
Discussion started by: msarro
4 Replies
8. Red Hat
What is the command to partition a completely new hard drive using red hat linux (1 Reply)
Discussion started by: blend
1 Replies
9. Shell Programming and Scripting
I am working in AIX ver 5 rel 3. It shows as follows.
@:on(cluster302)/home/abcde00->
shiusr1c is LPAR (Logical PARtition). Then what is "shiissra" called?
Thanks
Krishna
Please use code tags next time for your code and data. (1 Reply)
Discussion started by: kmanivan82
1 Replies
10. Red Hat
I am getting ready to install RHEL6 server. I have to create these partitions:
/ 10GB
SWAP 3GB
/opt/kent 10GB
/opt/kent/logs
/backup 20 GB
Will Gparted do this? or whats the easiest way? or even a tutorial?I am so new to this (4 Replies)
Discussion started by: linux4noob
4 Replies
LEARN ABOUT DEBIAN
scrounge-ntfs
scrounge-ntfs(8) BSD System Manager's Manual scrounge-ntfs(8)
NAME
scrounge-ntfs -- helps retrieve data from corrupted NTFS partitions
SYNOPSIS
scrounge-ntfs -l disk
scrounge-ntfs -s disk
scrounge-ntfs [-m mftoffset] [-c clustersize] [-o outdir] disk start end
DESCRIPTION
scrounge-ntfs is a utility that can rescue data from corrupted NTFS partitions. It writes the files retrieved to another working file system.
Certain information about the partition needs to be known in advance.
The -l mode is meant to be run in advance of the data corruption, with the output stored away in a file. This allows scrounge-ntfs to recover
data reliably. See the 'NOTES' section below for recover info when this isn't the case.
OPTIONS
The options are as follows:
-c The cluster size (in sectors). When not specified a default of 8 is used.
-l List partition information for a drive. This will only work when the partition table for the given drive is intact.
-m When recovering data this specifies the location of the MFT from the beginning of the partition (in sectors). If not specified
then no directory information can be used, that is, all rescued files will be written to the same directory.
-o Directory to put rescued files in. If not specified then files will be placed in the current directory.
-s Search disk for partition information. (Not implemented yet).
disk The raw device used to access the disk which contains the NTFS partition to rescue files from. eg: '/dev/hdc'
start The beginning of the NTFS partition (in sectors).
end The end of the NTFS partition (in sectors)
NOTES
If you plan on using this program sucessfully you should prepare in advance by storing a copy of the partition information. Use the -l option
to do this. Eventually searching for disk partition information will be implemented, which will solve this problem.
When only one partition exists on a disk or you want to rescue the first partition there are ways to guess at the sector sizes and MFT loca-
tion. See the scrounge-ntfs web page for more info:
http://memberwebs.com/swalter/software/scrounge/
AUTHOR
Stef Walter <stef@memberwebs.com>
scrounge-ntfs June 1, 2019 scrounge-ntfs