09-15-2005
CPU Speed
An easier solution (I'm not sure if it works in 4.3.3 - it's been a while since I touched one) is to run the printconf | more
Here is an example result from one of my systems:
System Model: IBM,7040-681
Machine Serial Number: <serial number>
Processor Type: PowerPC_POWER4
Number Of Processors: 2
Processor Clock Speed: 1300 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 7 <machine name>
Memory Size: 2048 MB
Good Memory Size: 2048 MB
Firmware Version: IBM,RG050715_d79e12_r
Console Login: enable
Auto Restart: true
Full Core: false
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hello,
I have a Supermicro server with a P4SCI mother board running Debian Sarge 3.1. This is the "dmidecode" output related to RAM info:
RAM speed information is incomplete.. "Current Speed: Unknown", is there anyway/soft to get the speed of installed RAM modules? thanks!!
Regards :)... (0 Replies)
Discussion started by: Santi
0 Replies
2. UNIX for Dummies Questions & Answers
Hi,
Is there a command I can use to find out how many CPU's and what type are on my server? (I was told to use cat /proc/cpuinfo)
Also, how do I know what kind of bus speeds are on my server?
Thanks in advance:) (3 Replies)
Discussion started by: ihot
3 Replies
3. HP-UX
How can I get the CPUs speed without root permissions?
Thanks. (2 Replies)
Discussion started by: psimoes79
2 Replies
4. HP-UX
Need to find the CPU speed of HP UX for a non root login.
echo "itick_per_usec/D" | adb /stand/vmunix /dev/mem | tail -1 will give the following for non root users
ERROR: cannot open `/dev/mem', errno = 13, Permission denied (2 Replies)
Discussion started by: surajb
2 Replies
5. Linux
Need to find CPU Speed of zLinux.
The commands like cat /proc/cpuinfo and /usr/bin/cpufreq-info does not gave me the expected results.
/usr/bin/cpufreq-info prints the
....
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
no or unknown cpufreq... (1 Reply)
Discussion started by: surajb
1 Replies
6. HP-UX
I get my CPU speed use pstat APIs
use this program serach google and just test it
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/param.h>
#include <sys/pstat.h>
#define CPU_ID 0
#define HZ_PER_MHZ 1000000
int main()
{
struct pst_processor pst;
union pstun pu;
... (0 Replies)
Discussion started by: alert0919
0 Replies
7. Solaris
Please let me know if there is any way I can find out (either via command line or SMF) the following:
1.CPU model (eg. Pentium 4,Celeron)
2.CPU speed (eg. 1GHz)
for this I could get the output through psrinfo -v, but still is there any other way?
3.Hard disk model (eg. Seagate).
When I... (9 Replies)
Discussion started by: saagar
9 Replies
8. Filesystems, Disks and Memory
I analysed disk performance with blktrace and get some data:
read:
8,3 4 2141 2.882115217 3342 Q R 195732187 + 32
8,3 4 2142 2.882116411 3342 G R 195732187 + 32
8,3 4 2144 2.882117647 3342 I R 195732187 + 32
8,3 4 2145 ... (1 Reply)
Discussion started by: W.C.C
1 Replies
9. Solaris
Hi bros,
CPU speed of Sun Sparc Enterprise T5140 in data sheet is 1200 Mhz. Why it shows in "prtdiag -v" command each thread just has speed at 1165 Mhz.
Thank you,
tien86 (4 Replies)
Discussion started by: tien86
4 Replies
10. Solaris
I have "inherited" a OmniOS (illumos based) server.
I noticed rsync is significantly slower in respect to my reference, FreeBSD 12-CURRENT, running on exactly same hardware.
Using same hardware, same command with same source and target disks, OmniOS r151026 gives:
test@omniosce:~# time... (11 Replies)
Discussion started by: priyadarshan
11 Replies
LEARN ABOUT DEBIAN
config::model::models::lcdd::cfontz
Config::Model::models::LCDd::CFontz(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::CFontz(3pm)
NAME
Config::Model::models::LCDd::CFontz - Configuration class LCDd::CFontz
VERSION
version 2.021
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Device
Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.
Size
Select the LCD size Optional. Type uniline. upstream_default: '20x4'.
Contrast
Set the initial contrast Optional. Type integer. upstream_default: '560'.
Brightness
Set the initial brightness Optional. Type integer. upstream_default: '1000'.
OffBrightness
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
integer. upstream_default: '0'.
Speed
Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200', '115200'. upstream_default: '9600'.
NewFirmware
Set the firmware version (New means >= 2.0) Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Reboot
Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
SEE ALSO
o cme
perl v5.14.2 2012-11-09 Config::Model::models::LCDd::CFontz(3pm)