HP-UX undetected disk drive Post: 8263

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

HP-UX undetected disk drive

I have installed a new SCSI drive into an HP6000-SE SCSI tower conencted to an old HP9000. This device cannot be detected by SAM. HOWEVER, when doing an ioscan -f I get: ====================================================================== bc 0 ...

2. Filesystems, Disks and Memory

Disk drive and Ultra 10

I need more space on my Ultra 10, and was thinking of a pair of 60 or 80 GB 7200 rpm ATA/100 drives mirrored with DiskSuite. Will afterarket IDE drives work in the Sun box? Are there any issues?

3. Filesystems, Disks and Memory

Disk Drive for Irix

I am looking for a Disk Drive for SGI Octane with Irix 6.4 . I was just hoping if someone out there can give me the vendor and part number ... Need a 9GB hopefully.

4. Filesystems, Disks and Memory

Pointing one hard drive name to another disk

Pointing one hard drive name to another disk -------------------------------------------------------------------------------- I have 2 disk drives - s2d9 & s2d11 on a solaris Unix system It was mapped so that anything that tried to call s2d9 would be pointed to s2d11 since s2d9 was bad....

5. HP-UX

Rebuild disk or drive?

I thought I would post it again..once a bad drive is replaced need to rebuild it right?? Is disk and drive same? So what command need when the disk gets replaces. When i did diskinfo...and found out the bad disk...and need to replace that.. Thanks if someone could answer this question i have.

6. UNIX for Advanced & Expert Users

The art of wrecking an hard disk drive.

Any creative ideas on how to wreck / secure clean an hard disk drive before disposal? dd if=/dev/zero of=/dev/disk_drive? shred -n whatever -z /dev/disk_drive? Magnet? (false sense of security) Fire? Hammer? Acid? Post your thoughts.

7. Solaris

Hard Errors on Disk Drive

Hi, What are the initial checks needs to be done while observing hard errors on one of the hard disk drive. Thanks, Babu.

8. UNIX for Dummies Questions & Answers

Unix machine as disk drive

Hello, This is my first post :) I wondered if it would be possible to connect a unix machine via USB as a disk drive in the same way as Android devices connects to the computers. The idea is to connect my debian machine to the television, that is compatible with USB pendrives. Then, the...

9. UNIX for Advanced & Expert Users

The disk drive for /tmp is not ready yet or not present && the disk drive for /boot is not ready yet

Hi Team when I boot the server I get this 2 errors : the disk drive for /tmp is not ready yet or not present the disk drive for /boot is not ready yet or not present and its stay like that , I m using Ubuntu 12.04 please if someone have any idea how to fix that problem .

LEARN ABOUT FREEBSD

trm

TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME

     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device trm

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   trm_load="YES"

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     SCSI controllers supported by the trm driver include:

     o	 Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
     o	 Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     o	 Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
     o	 Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     o	 Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     o	 Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

SEE ALSO

     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
     <cognet@FreeBSD.org>.

BSD
								 December 8, 2002							       BSD

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers