HP-UX undetected disk drive Post: 8189

9 More Discussions You Might Find Interesting

1. HP-UX

HP-UX undetected disk drive

I have installed a new SCSI drive into an HP6000-SE SCSI tower conencted to an old HP9000. This device cannot be detected by SAM. HOWEVER, when doing an ioscan -f I get: ====================================================================== bc 0 root CLAIMED BUS_NEXUS bc 1 56 bc CLAIMED...

2. Filesystems, Disks and Memory

Disk drive and Ultra 10

I need more space on my Ultra 10, and was thinking of a pair of 60 or 80 GB 7200 rpm ATA/100 drives mirrored with DiskSuite. Will afterarket IDE drives work in the Sun box? Are there any issues?

3. Filesystems, Disks and Memory

Disk Drive for Irix

I am looking for a Disk Drive for SGI Octane with Irix 6.4 . I was just hoping if someone out there can give me the vendor and part number ... Need a 9GB hopefully.

4. Filesystems, Disks and Memory

Pointing one hard drive name to another disk

Pointing one hard drive name to another disk -------------------------------------------------------------------------------- I have 2 disk drives - s2d9 & s2d11 on a solaris Unix system It was mapped so that anything that tried to call s2d9 would be pointed to s2d11 since s2d9 was bad....

5. HP-UX

Rebuild disk or drive?

I thought I would post it again..once a bad drive is replaced need to rebuild it right?? Is disk and drive same? So what command need when the disk gets replaces. When i did diskinfo...and found out the bad disk...and need to replace that.. Thanks if someone could answer this question i have.

6. UNIX for Advanced & Expert Users

The art of wrecking an hard disk drive.

Any creative ideas on how to wreck / secure clean an hard disk drive before disposal? dd if=/dev/zero of=/dev/disk_drive? shred -n whatever -z /dev/disk_drive? Magnet? (false sense of security) Fire? Hammer? Acid? Post your thoughts.

7. Solaris

Hard Errors on Disk Drive

Hi, What are the initial checks needs to be done while observing hard errors on one of the hard disk drive. Thanks, Babu.

8. UNIX for Dummies Questions & Answers

Unix machine as disk drive

Hello, This is my first post :) I wondered if it would be possible to connect a unix machine via USB as a disk drive in the same way as Android devices connects to the computers. The idea is to connect my debian machine to the television, that is compatible with USB pendrives. Then, the...

9. UNIX for Advanced & Expert Users

The disk drive for /tmp is not ready yet or not present && the disk drive for /boot is not ready yet

Hi Team when I boot the server I get this 2 errors : the disk drive for /tmp is not ready yet or not present the disk drive for /boot is not ready yet or not present and its stay like that , I m using Ubuntu 12.04 please if someone have any idea how to fix that problem .

LEARN ABOUT DEBIAN

vpo

VPO(4)							   BSD Kernel Interfaces Manual 						    VPO(4)

NAME

     vpo -- parallel to SCSI interface driver

SYNOPSIS

     device vpo

     For one or more SCSI busses:
     device scbus

DESCRIPTION

     The vpo driver provide access to parallel port Iomega Zip and Jaz drives.

HARDWARE

     The vpo driver supports the following parallel to SCSI interfaces:

     o	 Adaptec AIC-7110 Parallel to SCSI interface (built-in to Iomega ZIP drives)
     o	 Iomega Jaz Traveller interface
     o	 Iomega MatchMaker SCSI interface (built-in to Iomega ZIP+ drives)

USAGE

     The driver should let you use a printer connected to the drive while transferring data.

     DOS and FreeBSD file systems are supported.  When mounting a DOS file system or formating a FreeBSD file system, check the slice of the disk
     with the fdisk(8) utility.

     In order to unixify a ZIP disk, put the following in /etc/disktab:

     zip|zip 100:
	     :ty=removable:se#512:nc#96:nt#64:ns#32:
	     :pa#196608:oa#0:ba#4096:fa#512:
	     :pb#196608:ob#0:bb#4096:fb#512:
	     :pc#196608:oc#0:bc#4096:fc#512:

     and use bsdlabel(8).

     If you have trouble with your driver, your parallel chipset may not run properly at the detected mode (NIBBLE, PS2 or EPP).  Tune the ppc(4)
     bootflags to force other modes.

SEE ALSO

     da(4), lpt(4), ppbus(4), ppc(4), scsi(4)

HISTORY

     The vpo manual page first appeared in FreeBSD 3.0.

AUTHORS

     This manual page was written by Nicolas Souchu.

BUGS

     During boot, the driver first tries to detect a classic ZIP, then a ZIP+.	The ZIP+ detection is intrusive and may send erroneous characters
     to your printer if the drive is not connected to your parallel port.

BSD
								 December 14, 2004							       BSD

9 More Discussions You Might Find Interesting

1. HP-UX