Sponsored Content
Operating Systems Solaris Solaris mirroring / non-root disk Post 80696 by 98_1LE on Wednesday 10th of August 2005 07:42:16 PM
Old 08-10-2005
I have never used slice 2 (whole disk) with SDS, but it should work assuming the disks are the same and you already have a meta database. The syntax looks correct.

I would partition the disk so that slice 7 has all of the cylinders in it, and use it.
 

9 More Discussions You Might Find Interesting

1. Solaris

Veritas root disk mirroring

Hi there, My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct. 1. Break the sub-disks, plexes of the root mirror. 2. Remove the sub-disks,plexes of the root mirror. 3. Remove one of... (10 Replies)
Discussion started by: Jartan
10 Replies

2. Solaris

Solaris 10 Disk Mirroring

Has anyone managed to set up disk mirroring in Solaris 10 yet? If so can you point me in the direction of some useful documentation please. Cheers (25 Replies)
Discussion started by: korfnz
25 Replies

3. Solaris

Disk Mirroring on solaris 5.8

Hi Friends, I am having Sun Solaris 5.8 OS installed having 2 different size hard disk, sizes are c0t0d0s0(160 GB) and c0t2d0s0 (40GB). I have installed Sun Solaris 5.8 OS in c0t0d0s0 (160GB) harddisk. I have configured all the parameters required for disk mirroring. But when executing... (4 Replies)
Discussion started by: Vijayakumarpc
4 Replies

4. Solaris

mirroring root disk using svm - but no free slices for metadb's

Hi all, we have an existing system that was configured using just one of the (two) internal disks. I want to mirror the disk using SVM, but have realised there is no free slice for creating the metadb's. Is there a workaround I can use for this? In the past we have always kept slice 7 free -... (8 Replies)
Discussion started by: badoshi
8 Replies

5. Solaris

Root Disk mirroring in SVM

Dear All, Please help me to configure root mirroring using SVM in Solaris 9. Thanks and Regards, Lakkireddy BR (3 Replies)
Discussion started by: lbreddy
3 Replies

6. Solaris

Disk mismatch while trying to zfs mirroring non-root disks

Hello All, I am trying to mirror two non-root hard drives using zfs. But "fmthard" fails when I try to copy the vtoc due to disk mismatch. Please help me. --- iostat command shows the disk to be similiar --- format command shows disk to be different :confused: --- c1t2d0 is the active... (8 Replies)
Discussion started by: pingmeback
8 Replies

7. Solaris

root disk mirroring in solaris volume manager for solaris 10

Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment. Let me know if you need any deatils on this. Thanks, Rama (1 Reply)
Discussion started by: ramareddi16
1 Replies

8. Solaris

Root disk mirroring in SVM

I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
Discussion started by: Laxxi
6 Replies

9. Solaris

Root disk mirroring in Solaris 10

I would like to perform root disk mirroring task. Can someone please help me out on this. Thanks !! Regards, Rama (2 Replies)
Discussion started by: ramagore85
2 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 02:15 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy