I cannot init kde Post: 80556

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

init.d

I have written a daemon and want to make sure that it starts up again after the machine is re-started so I can quit manually doing it. Problem is I'm having difficulty understanding what to do with the init.d Any help would be appreciated!

2. UNIX for Advanced & Expert Users

Init 6 & Init 0 problem

Hi Expert, I have encountered some problem with my SUN system. Everytime when i issue command #init 6 OR #init 0 it just logout and prompt for login again instead of rebooting the server when run init 6 and system shutdown when run init 0.. I can only reboot the system using reboot ... Was...

3. UNIX for Dummies Questions & Answers

/etc/init.d/networking

Hi all, What should i do to make the following work: # /etc/init.d/networking restart Setting up IP spoofing protection: rp_filter. Reconfiguring network interfaces...No support for INET6 on this system. Failed to bring up lo. done. Thanks & Regards Gauri

4. Solaris

different between /sbin/init and /usr/sbin/init

root@test09 # ls -al /sbin/init -r-xr-xr-x 1 root sys 550000 Jun 29 2002 /sbin/init root@test09 # ls -al /usr/sbin/init -r-xr-xr-x 1 root sys 37100 Jun 29 2002 /usr/sbin/init

5. UNIX for Dummies Questions & Answers

About init

I know if a parent process exits before its child, the last one becomes orphan for a while and then is added to the children of Init process. I'd like to know deeper 1 how the orphan becomes init process, 2 how init knows that from a some point on it has another child. Thank you in advance.

6. Linux

How to I change init levels after typing init 1

Dear all, I typed in init 1 on my redhat box as root and according to wikipedia (http://en.wikipedia.org/wiki/Runlevel): 1 Single-User Mode Does not configure network interfaces, start daemons, or allow non-root logins So now I can't connect back to it. How do I change the init back to 3?...

7. Red Hat

Difference between 'init s' and 'init 1'

What is the difference between 'init s' and 'init 1'. I know that both will work to change the current run level to single user mode. Is there any difference in those two commands?

8. UNIX for Advanced & Expert Users

Problem on init 0, execution is the same with init 6

Hi, I am experiencing a weird thing on my SUNFIRE machine with Solaris 9 OS. When I do init 0 to shutdown the machine to go to ok prompt, what it did was shutdown and reboot like an init 6 command do. I did check the corresponding rc scripts that were involved with init 0 and compared with rc...

9. Solaris

What is the diffe b/w init s and init S

i did my research in finding the answer but couldn't find right one. Please give your inputs.

10. Red Hat

init-script failing because of /etc/rc.d/init.d/functions

I encountered a problem on one of our database servers. OS: CentOS 5.5 final Kernel: 2.6.18-238.5.1.el5.028stab085.2 (OpenVZ kernel) We wrote some DB-Start/Stop-scripts ("/db2/admin/scripts_dba/start_services.ksh" and ".../stop_services.ksh") to start the database instances. (Database...

LEARN ABOUT OPENSOLARIS

machid

machid(1)							   User Commands							 machid(1)

NAME

       machid, sun, iAPX286, i286, i386, i486, i860, pdp11, sparc, u3b, u3b2, u3b5, u3b15, vax, u370 - get processor type truth value

SYNOPSIS

       sun

       iAPX286

       i386

       pdp11

       sparc

       u3b

       u3b2

       u3b5

       u3b15

       vax

       u370

DESCRIPTION

       The following commands will return a true value (exit code of 0) if you are using an instruction set that the command name indicates.

       sun	  True if you are on a Sun system.

       iAPX286	  True if you are on a computer using an iAPX286 processor.

       i386	  True if you are on a computer using an iAPX386 processor.

       pdp11	   True if you are on a PDP-11/45tm or PDP-11/70tm.

       sparc	  True if you are on a computer using a SPARC-family processor.

       u3b	  True if you are on a 3B20 computer.

       u3b2	  True if you are on a 3B2 computer.

       u3b5	  True if you are on a 3B5 computer.

       u3b15	  True if you are on a 3B15 computer.

       vax	  True if you are on a VAX-11/750tm or VAX-11/780tm.

       u370	  True if you are on an IBM(R) System/370tm computer.

       The  commands  that  do	not  apply will return a false (non-zero) value. These commands are often used within makefiles (see make(1S)) and
       shell scripts (see sh(1)) to increase portability.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       make(1S), sh(1), test(1), true(1), uname(1), attributes(5)

NOTES

       The machid family of commands is obsolete. Use uname -p and uname -m instead.

SunOS 5.11							    5 Jul 1990								 machid(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

init.d

Discussion started by: BC_Kevin

2. UNIX for Advanced & Expert Users

Init 6 & Init 0 problem

Discussion started by: sc2005

3. UNIX for Dummies Questions & Answers

/etc/init.d/networking

Discussion started by: gauri

4. Solaris

different between /sbin/init and /usr/sbin/init

Discussion started by: userking