08-08-2005
connecting to service processor on 44P 170
I dont have an ascii terminal to hook upto this thing, trying to use my laptop but it doesnt seem to want to communicate, is there a special cable i should be using for this?
9 More Discussions You Might Find Interesting
1. HP-UX
I am receiving messages from HP-UX Server
"The operating system is unable to communicate with the service processor.
The support bus which connects the system processors, the service processor and the Power Monitor or Platform Monitor may have become hung ".
I need help in the following:... (1 Reply)
Discussion started by: cgege
1 Replies
2. AIX
Question is on setting of Physical and Virtual processors for LPARs to make proper use of virtualization capabilities.
Environment is a 8-way p570 with 4 LPARs.
lparVIO1 and lparVIO2:
AIX 5300-04-01
Mode/Type= Shared-SMT/Capped
Minimum Processors= 0.10
Desired Processors= 0.50
Maximum... (1 Reply)
Discussion started by: guttew
1 Replies
3. AIX
Hi Folks,
I am a new AIX user. This is my first post in the UNIX forums. I did do a little bit of search before creating this post, but did not find any conclusive information. I am trying to connect to the service processor of an older 44p Model 170 box using my laptop. The 44p box has two... (6 Replies)
Discussion started by: shaell
6 Replies
4. UNIX for Dummies Questions & Answers
Post moved to more adequate group: AIX
https://www.unix.com/aix/84704-ibm-44p-170-boot-problems.html (2 Replies)
Discussion started by: vbe
2 Replies
5. AIX
I am trying to install AIX 4.3 on a 44P-170 and am having problems. I have the 44P connected to a laptop through the serial port and am trying to boot from the IBM AIX 4.3 CD and I can only get as far as the SMS (I believe) screen. The current Processor Firmware is sh040616 and the system... (3 Replies)
Discussion started by: SeanU
3 Replies
6. AIX
Hello Gentlemen, I have a 44p-170 CREO computer that conects to Trendsetter 800 quamtum ans one printer console, I have Problem with cable connections, someone knows how to interconnect whith them, thanks.
Please understand that, to ensure a common convening platform, is English only. I have... (0 Replies)
Discussion started by: allanlikan
0 Replies
7. AIX
picked up this old p520 , try many ways to connect to the SP..
a) null modem using a PC connecting to the lower S1 ...but see a bunch of
garbages across the screen once the main machine is off
b) try guessing the default IPs 192.168.3.147 and 192.168.2.147, for ports HMC1 and HMC2
no... (7 Replies)
Discussion started by: ppchu99
7 Replies
8. AIX
Hello,
I was recently given an RS/6000-44P-270 and am attempting to resurrect it for personal use. My current status is as follows:
1 - Required to restore default boot sequence (floppy, scsi, ethernet),
2 - BOOTP fails, restarting does not help surpass this.
What is the most likely... (2 Replies)
Discussion started by: RAVC01
2 Replies
9. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT X11R4
liebert
LIEBERT(8) NUT Manual LIEBERT(8)
NAME
liebert - Driver for Liebert contact-closure UPS equipment
NOTE
This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
You may have to build another cable with DTR connected through to the UPS for it to work.
There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
fundamental limitation of any contact-closure driver.
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 LIEBERT(8)