08-01-2005
Thank you ddziuk!
Maybe I am not understanding what is returned from my netstat / entstat output.
Here is what I get from netstat -v (it is the same identical output for entstat.
Would you please point out the link speed of this system.
Thank you so much!
KG
-------------------------------------------------------------
ETHERNET STATISTICS (ent0) :
Device Type: IBM PCI Ethernet Adapter (22100020)
Hardware Address: 00:06:29:21:d8:66
Elapsed Time: 149 days 23 hours 58 minutes 32 seconds
Transmit Statistics: Receive Statistics:
-------------------- -------------------
Packets: 1176234 Packets: 2050178
Bytes: 328746201 Bytes: 270761959
Interrupts: 0 Interrupts: 2039695
Transmit Errors: 0 Receive Errors: 0
Packets Dropped: 0 Packets Dropped: 0
Bad Packets: 0
Max Packets on S/W Transmit Queue: 31
S/W Transmit Queue Overflow: 0
Current S/W+H/W Transmit Queue Length: 1
Broadcast Packets: 3152 Broadcast Packets: 826912
Multicast Packets: 2 Multicast Packets: 0
No Carrier Sense: 0 CRC Errors: 0
DMA Underrun: 0 DMA Overrun: 0
Lost CTS Errors: 0 Alignment Errors: 0
Max Collision Errors: 0 No Resource Errors: 0
Late Collision Errors: 0 Receive Collision Errors: 0
Deferred: 2177 Packet Too Short Errors: 91
SQE Test: 0 Packet Too Long Errors: 0
Timeout Errors: 0 Packets Discarded by Adapter: 0
Single Collision Count: 5408 Receiver Start Count: 0
Multiple Collision Count: 4528
Current HW Transmit Queue Length: 1
General Statistics:
-------------------
No mbuf Errors: 0
Adapter Reset Count: 1
Driver Flags: Up Broadcast Running
Simplex AlternateAddress 64BitSupport
IBM PCI Ethernet Adapter Specific Statistics:
------------------------------------------------
Chip Version: 16
Packets with Transmit collisions:
1 collisions: 5408 6 collisions: 10 11 collisions: 0
2 collisions: 3282 7 collisions: 4 12 collisions: 0
3 collisions: 1062 8 collisions: 0 13 collisions: 0
4 collisions: 146 9 collisions: 0 14 collisions: 0
5 collisions: 24 10 collisions: 0 15 collisions: 0
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Sorry to keep bothering you guys like this with all these boring, related questions. But here's one that should be more readily answerable.
What command or file should i use to get the speed/data rate of a network link? This is the capacity speed for instance 10Mbps or 100 Mbps in the case of the... (2 Replies)
Discussion started by: mint1981
2 Replies
2. UNIX for Advanced & Expert Users
i purchased, what was labeled as a 4-port fast ethernet sbus card from ebay.
i installed it in my ultra1, and it seems to be working fine. how can i determine if the card is infact a fast ethernet card vs. the standard ethernet 4-port card? (7 Replies)
Discussion started by: xyyz
7 Replies
3. AIX
Hi,
We have IBM P-Series servers (P690, P650) equiped with AIX 5.2.
Further we have 10/100 MB ethernet cards in P650 and 10/100/1000 MB ethernet cards in P690 servers. Servers are on a LAN connected with Cisco 3750 catalyst switch. FTP from one server to another is very slow,,,even 3-4 MB... (3 Replies)
Discussion started by: aqeelcu@hotmail
3 Replies
4. Solaris
Hi,
Does anyone know how to increase the link speed on a ce interface? Currently mine is running at 100. I need to increase this to 1000.
# kstat -p ce:0::link*
ce:0:ce0:link_T4 0
ce:0:ce0:link_asmpause 0
ce:0:ce0:link_duplex 2
ce:0:ce0:link_pause 0... (4 Replies)
Discussion started by: sparcman
4 Replies
5. Filesystems, Disks and Memory
I analysed disk performance with blktrace and get some data:
read:
8,3 4 2141 2.882115217 3342 Q R 195732187 + 32
8,3 4 2142 2.882116411 3342 G R 195732187 + 32
8,3 4 2144 2.882117647 3342 I R 195732187 + 32
8,3 4 2145 ... (1 Reply)
Discussion started by: W.C.C
1 Replies
6. AIX
Hi Can any suggest me how to work on this particular issue i am facing.
Below is the error message received on vio servers.
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
4B436A3D 0326102912 T H fscsi1 LINK ERROR
4B436A3D 0325212712 T H fscsi1 LINK ERROR
4B436A3D... (2 Replies)
Discussion started by: ganiiee
2 Replies
7. UNIX for Dummies Questions & Answers
Hi,
I went to a computer store and the salesman sold me a SATA cable and told me that all SATA cables are the same. Another salesman at a different store told me a cable rated for SATA 2, which I bought, MIGHT work as well as one rate for SATA 3 but it is not guaranteed. I decided to run a... (3 Replies)
Discussion started by: mojoman
3 Replies
8. UNIX for Dummies Questions & Answers
Hi,
i tried to search a string, recursively, in subdirectories with:
find . -type f -print | xargs grep -s hello
i found all files that contain the string "hello"
but i would perform a search also in symbolic link, so i tried with
find -L . -print | xargs grep -s hello
but no result was... (3 Replies)
Discussion started by: nash83
3 Replies
9. AIX
Hello.
I have a server RS/6000 with AIX 4.2. The server have a network card with 10/100mbps speed, but for some reason, the ethernet only runs at 10Mbps, it doesn,t matter if I put the net cable on a 100Mbps switch, it keeps running at 10Mbps speed....
I know how to view/change ethernet speed... (1 Reply)
Discussion started by: little_ball
1 Replies
10. AIX
i need to download 4.3 ISO because my server rs6000 no display and i want to install on ther intel server to get data
Also, help me installed cobol database on aix server can work on sco cobol ? (2 Replies)
Discussion started by: Rajan Ghanshyam
2 Replies